朗讯cdma 1x基站分组管宽度的配置

简单介绍朗讯系统cdma 1x基站分组管(PP)宽度的配置，并对朗讯cdma 1x基站分组管宽度不合理的配置及信道板扩容后的PP宽度配置进行了案例分析。     

Conflict detection and resolution in two-dimensional prefix router tables

We show that determining the minimum number of resolve filters that need to be added to a set of two-dimensional (2-D) prefix filters so that the filter set can implement a given policy using the first-matching-rule-in-table tie breaker is NP-hard. Additionally, we develop a fast O(nlogn+s) time, where n is the number of filters and s is the number of conflicts, plane-sweep algorithm to detect and report all pairs of conflicting 2-D prefix filters. The space complexity of our algorithm is O(n). On our test set of 15 2-D filter sets, our algorithm runs between 4 and 17 times as fast as the 2-D trie algorithm of A. Hari et al. (2000) and uses between 1/4th and 1/8th the memory used by the algorithm of Hari et al. On the same test set, our algorithm is between 4 and 27 times as fast as the bit-vector algorithm of Baboescu and Varghese (2002) and uses between 1/205 and 1/6 as much memory. We introduce the notion of an essential resolve filter and develop an efficient algorithm to determine the essential resolve filters of a prefix filter set.     

天铁炼钢厂四流中间包流场的水模实验及优化

介绍了天铁炼钢厂中间包水模实验原理和过程，分析了斜、直、圆三种型式挡渣墙模拟结果，提出了合理的挡渣控流方案，在生产实践中使用效果良好。     

利用试井资料评价压裂地质效果

依据裂缝井试井解释理论，利用实测试井资料对压裂地质效果进行了深入剖析。通过部分探井措施后增产效果实例研究，把压裂地质效果分为三种类别；并从地质角度出发，详细分析了优选压裂井层的依据。为油气井合理开发和制定增产措施提供参考依据。     

常减压蒸馏装置换热网络的节能优化

利用夹点技术理论对耗能严重的某炼油厂常减压蒸馏装置进行用能诊断分析;并结合热力学原理得到两种优化换热网络,节能效果显著。     

压电量测系统漏电影响分析

本文通过对压电量测系统等效电路图的逐步简化,得出矩形脉冲信号的漏电方程;并对系统在各种情况下的时间常数,漏电相对误差进行了计算,最后就系统在校准和现场测试中经常碰到的几种情况,进行了定量估算,从而解决了压电量测系统在使用中的一些具体问题。     

1/3码的动态CMOS全自检电路的设计

自检测电路设计方法有多种多样,本文中介绍了TSC电路的概念,并采用1/3码的动态CMOS设计TSC电路,通过在Cadence环境下仿真,仿真结果表明本设计可行。     

水轮机过流部件磨蚀问题的研究与防护

针对我国高含沙水流中运行的水轮机组的过流部件的磨蚀这个长期存在的疑难问题，开展研究工作，在分析水轮机过流部件泥沙磨损、空化破坏各自的磨损机理、特点、影响因素、预测模型等的基础上，总结出水轮机过流部件的磨蚀主要是泥沙磨损、空化破坏及它们的联合作用，提出水轮机过流部件磨蚀的主要防护措施，为最终解决水轮机过流部件磨蚀问题提供了理论依据。图6幅，表1个。     

八种新功能晶体的比热及其与相变掺杂物关系的实验研究

本文对八种新型功能晶体Ｌｉ２Ｂ４Ｏ７、Ｂｉ１２ＴｉＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ４Ｇｅ３Ｏ１２、Ｓｒ１－ｘＢａｘＮｂ２Ｏ６（ｘ＝０．３３，０．４８）、ＬｉＴａＯ３等在１３０～９７３Ｋ范围内的比热行为及其与相变、组分之间的关系进行了实验研究，给出了比热的多项式拟合方程，并与用纽曼－卡普定律及用Ｗｉｋｅｌｍａｎｎ经验方程的比热计算值作了对比，为晶体比热的估算提供了依据和方法。     

Residual stresses and transformation toughening in MoSi2 composites reinforced with partially stabilized zirconia

The results of study of the effects of yttria stabilization (0–6 mol.%) on the room-temperature fracture behavior and toughening mechanisms in zirconia-reinforced MoSi₂ are presented in this paper. Transformation toughening is shown to occur only in composites reinforced with zirconia particles stabilized with 2 mol.% yttria. However, the fracture toughness levels are comparable in the other composites with yttria levels between 0 and 6 mol.%. Toughening in the other composites is attributed to the combined effects of residual stress, microcrack shielding/anti-shielding and/or crack deflection. A rigorous micromechanics-based model is presented for the estimation of residual stress levels in brittle materials reinforced with phases that can transform during cooling or under stress. The model is applied successfully to the rationalization of the observed fracture and toughening phenomena.