用于重离子核反应实验测量的纵向电场气体电离室

本文报道了一种新型的大动态范围，多叠层探测器系统组件之一的纵向电场气体电离室的构造，性能和在中能得离子核反应实验中的应用。     

紫外激光诱导胃癌组织自体荧光的研究

本文测量了紫外激光（３０８ｎｍ）激发诱导正常组织和胃癌组织３１５ｎｍ－６００ｎｍ波段的自体荧光，发现胃癌组织在此荧光光谱不同于正常组织的荧光光谱。根据两者４的区别，可以把胃癌组织从正常组织中区分出来，这为诊断胃癌提供了一个新的思路。     

高质量的一级光栅1．55μmDFB激光器

本文详细叙述了ＤＦＢ激光器的设计要点和新的工艺。采用一级全息光栅和二步液相外延法批量研制出高稳定单纵模工作的１．５５μｍ分布反馈激光器（ＤＦＢ—ＬＤ）。外延片成品率＞４０％。器件特性：２５℃时阈值电流２０ｍＡ，单面光功率＞１０ｍｗ，主边模抑制比ＳＭＳＲ达４３ｄＢ（λ／４相移光栅），谱线宽度△ν－２０ｄＢ＝０．３ｎｍ，调制速率＞１．８ＧＨｚ。可靠性测试显示：高温监测光谱稳定，２５°Ｃ时阈值退化率△Ｉｔｈ／ｔ＜０．３ｍＡ／ｋｈ，对应器件预估寿命将超过１０万ｈ。     

一维波动方程反演波阻抗的实现及效果

利用波动方程反演波阻抗，由于计算工作量大、稳定性差等原因，一直没有在地震勘探资料处理中得到实际应用。本文提出的一维波方程逐段折叠反演方法能较好地克服上述缺陷，具有计算量相对较小、精度高、稳定性好等特点。并在大庆长垣东部和西部的实际资料处理中见到了良好的效果。     

On joint transmitter and receiver optimization formultiple-input-multiple-output (MIMO) transmission systems

The problem of joint transmitter and receiver optimization for MIMO systems under the mean-squared error (MSE) criterion is revisited. We address the general problem of N (number of users) ≠M (number of channel inputs) ≠P (number of channel outputs) when the system is Nyquist bandlimited and obtain analytical solutions for the optimal transmit-receive pair. Next, we demonstrate how the above result is directly applicable to the problem where the system has excess bandwidth, thereby generalizing the results of Salz (1985). In conclusion, several numerical examples are included to demonstrate the performance gains obtainable with jointly optimized MIMO systems vis-a-vis systems based only on receiver optimization     

350m~3高炉煤气净化单文氏管可调喉口理论计算及分析

通过单文氏管可调喉口的理论计算及分析，找出喉口最佳工作状态下的工艺参数及适合这种设备特性的煤气工作参被变化范围，以期能对实际操作过程及运行状态分析提供理论依据，提出单文氏可调喉口在更广泛意义上的设备、工艺参数选择、计算的方法。     

Cu－Zn－Al合金中贝氏体的有序性

本文用Ｘ射线研究了Ｃｕ－２０Ｚｎ－６Ａｌ（ｗｔ％）合金中贝氏体结构的有序性，并与马氏体结构进行了比较，实验表明，从高温Ｂ２母相和低温Ｌ２１母相生成的贝氏体中（１１５）和（２０５）衍射峰或（１２１０）和（２０１０）衍射峰是重叠的，对生成的贝氏体进行一段时间的保温或缓慢冷却处理，其衍射峰的特征并不改变，这与马氏体（１１５）和（２０５）衍射峰或（１２１０）和（２０１０）衍射峰的分离特性不相符合。说明贝氏体结构有序度与马氏体明显不同，它的形成不可能继承母相的有序度。     

瞬态气体温度传感器研究

本文介绍了作者研制的瞬态气体温度传感器.针对传感器敏感元件的结构设计，应用等效物理模型，对影响温度测试精度和动态响应的结构参数以及使用方法进行了计算分析.研制出的温度传感器经激波管动态标定，证明其具有百微秒级的动态响应.本文最后介绍了在倒拖工况下，柴油机缸内瞬态气体温度的测试结果．     

A super element model for non-linear analysis of stiffened box structures

A numerical model for non-linear static and dynamic analysis of stiffened box structures is presented. The model is based on a new super element formulation which provides complete C¹ continuity for both plate and beam elements. Geometric and material non-linearities are included and the temporal equations are solved by the implicit Newmark-β method with Newton-Raphson subiteration. The new formulation has been applied to the static, vibration and transient analysis of various structures such as flat plates, folded plates and rectangular boxes. Both isotropic and beam stiffened structures are considered and the results obtained are compared with other available solutions. It is observed that the new super element formulation can provide reasonable solutions to both linear and non-linear problems of stiffened box structures. The mathematical formulation of the model is presented in this paper, while the numerical verifications are given in the companion paper.¹     

镀镍云母导电复合材料的研究

对云母粒子化学镀镍及以LDPE为基材,镀镍云母粒子为填料制备的导电复合材料进行研究。认为此种导电复合材料只有质量轻、强度大及良好的导电等性能。