The long string as a field probe

We show how a long string can be used to probe the incident field across the target zone of a radar cross section (RCS) test range. The string may be stretched horizontally from wall to wall, or vertically from floor to ceiling. One end of the string is fixed and the other end is moved by an actuator mounted in the wall or ceiling. The resulting motion changes the angle of the string with respect to the incident-field direction, during which time the coherent radar echo is recorded as a function of the string angle. The coherent signal-as-a-function-of-angle data are then transformed to the cross-range domain using the fast Fourier transform (FFT), whence we obtain a chart of the incident field amplitude as a function of cross-range distance. Numerical examples are presented that show how variations in the incident field influence the string echo. A sample of experimental data shows that the processed data are readily interpreted.     

A high-resolution burst-mode laser transmitter with fast and accurate level monitoring for 1.25 Gb/s upstream GPONs

An innovative burst-mode laser transmitter (BM-TX) is presented for gigabit-capable passive optical network (GPON) upstream transmission at 1.25 Gb/s. The laser bias and modulation current each can reach 80 mA with a resolution of 0.1 mA providing a total drive current up to 160 mA. Both currents are generated by 10-bit current steering digital-to-analog converters (DACs), the architecture of which is specially adapted to yield a monotonic current setting at settling times below 12.8 ns. Tests show that fast automatic power control (APC) can stabilize and track the launched optical power with a tolerance of less than 1 dB over a wide temperature range for outdoor operation. The APC only requires a straightforward calibration of the "0" and the "1" level at room temperature. Optical level monitoring on strings of four consecutive "0" bytes and two consecutive "1" bytes at 1.25 Gb/s is demonstrated. APC based on such short strings of data has not been shown before. The circuits have been designed in a 0.35 /spl mu/m SiGe BiCMOS process. Experimental results show that this dc-coupled BM-TX meets the specifications of the recently approved ITU-T Recommendation G.984.2 supporting an intelligent power leveling mechanism (PLM).     

催化裂化大油气管线阻焦剂的研究与开发

介绍了阻焦剂的阻聚分散机理，测定了不同组分的阻焦剂对不同性质原料的阻焦效果，并考察了不同加入浓度对阻焦率以及催化裂化产品分布的影响。试验结果表明：加入50—100μg/g的阻焦剂，可使催化裂化大油气管线阻焦率达到53．7％—63．8％，同时对产品分布及产品性质无不良影响，具有技术经济可行性。     

添加VC的TiB2基硬质材料研究

对添加VC的TiB2基硬质材料进行了研究。通过实验测定了硬度、横向断裂强度、高温强度以及耐磨性等性能，通过观察SEM照片研究了VC对TiB2基硬质材料组织结构的影响。综合各种指标，我们确定在TiB2-Fe—Mo硬质材料中VC的最佳添加量为0．5％。     

短脉冲激光与岩石相互作用机理初探

石油开采过程中，为增大原始岩体的渗流速度，一般采用水压致裂或射孔弹的方法来加以实现，但两种方法都存在一定缺陷。为探索一种新概念石油开采技术，即采用激光技术增大原始岩体的渗透率，对短脉冲激光辐照自然、饱水和饱油状态的花岗岩、大理岩和红砂岩的响应作了初步研究。得到了激光辐照下，岩石试样内烧蚀坑的三维形态以及烧蚀状态与脉冲数的初步关系。结果表明：脉冲激光可以在试样局部产生一定的裂纹；饱油试样的烧蚀情况较饱水和自然状态更严重。但对于产生的裂纹数量，尺寸以及方向等方面的控制尚需进一步的工作。     

污水射流曝气工艺技术在聚驱中的应用

为了减少油田污水外排，应用油田采出的污水配制和稀释聚合物溶液，需要对污水进行曝气处理，通过小型试验和现场应用，对应用射流曝气技术处理油田污水的工艺和效果进行了可行性研究和试验，研究表明应用射流曝气技术处理油田污水，可以达到曝氧站的处理效果，经过射流曝气工艺处理的污水所配制和稀释的聚合物溶液粘度能够满足聚合物驱油的注入要求，并且可以大幅度降低地面工程建设投资，取得较好的经济效益和社会效益。     

成都市火车南站斜拉桥斜拉索安装工艺

采用倒链葫芦、卷扬机或软牵引装置对斜拉索进行牵引安装 ,使牵引力达到 5 0 0余kN ,解决了斜拉索安装拉力大这一施工难题。     

一种矿山用钢筋网自动化焊接生产线的设计

设计一条钢筋网自动化焊接生产线，包括经料送料平台、纬料自动分料及上料机构、多点电阻点焊机、接料平台、卸料机械手。从上料到出料依靠电机、汽缸之间的协调工作来实现。并由单片机和PLC实现控制功能，上位机用MCGS组态软件在整个过程监视现场，采集工作状态及参数，起到监控作用。     

电液比例控制技术在工程船舶中的应用

以长江及沿海航道铺排工程船(长雁1号)液压系统的工程项目为背景,采用电液比例控制技术设计了一种新型的电液比例控制系统,通过对移船马达速度的控制实现了移船的移位和准确定位,同时液压系统的能耗也大大降低.