Study on related simulations between exit characteristics and evacuation performance

Microsystem Technologies - During a building disaster, building occupants typically engage in herd behavior, which results in friction, pushing, and even injury and death. Building occupants...     

Configurational Isomers Induced Significant Difference in All-Polymer Solar Cells

The design of polymer acceptors plays an essential role in the performance of all-polymer solar cells. Recently, the strategy of polymerized small molecules has achieved great success, but most polymers are synthesized from the mixed monomers, which seriously affects batch-to-batch reproducibility. Here, a method to separate γ-Br-IC or δ-Br-IC in gram scale and apply the strategy of monomer configurational control in which two isomeric polymeric acceptors (PBTIC-γ-2F2T and PBTIC-δ-2F2T) are produced is reported. As a comparison, PBTIC-m-2F2T from the mixed monomers is also synthesized. The γ-position based polymer (PBTIC-γ-2F2T) shows good solubility and achieves the best power conversion efficiency of 14.34% with a high open-circuit voltage of 0.95 V when blended with PM6, which is among the highest values recorded to date, while the δ-position based isomer (PBTIC-δ-2F2T) is insoluble and cannot be processed after parallel polymerization. The mixed-isomers based polymer, PBTIC-m-2F2T, shows better processing capability but has a low efficiency of 3.26%. Further investigation shows that precise control of configuration helps to improve the regularity of the polymer chain and reduce the π–π stacking distance. These results demonstrate that the configurational control affords a promising strategy to achieve high-performance polymer acceptors.     

Cu-assisted induced atomic-level bivalent Fe confined on N-doped carbon concave dodecahedrons for acid oxygen reduction electrocatalysis

Atomically dispersed transition metals anchored on N-doped carbon have been successfully developed as promising electrocatalysts for acidic oxygen reduction reaction (ORR). Nonetheless, how to introduce and construct single-atomic active sites is still a big challenge. Herein, a novel concave dodecahedron catalyst of N-doped carbon (FeCuNC) with well confined atomically dispersed bivalent Fe sites was facilely developed via a Cu-assisted induced strategy. The obtained catalyst delivered outstanding ORR performance in 0.5 M H₂SO₄ media with a half-wave potential (E_1/2) of 0.82 V (vs reversible hydrogen electrode, RHE), stemming from the highly active bivalent Fe-N_x sites with sufficient exposure and accessibility guaranteed by the high specific surface area and curved surface. This work provides a simple but efficient metal-assisted induced strategy to tune the configurations of atomically dispersed active sites as well as microscopy structures of carbon matrix to develop promising PGM-free catalysts for proton exchange membrane fuel cell (PEMFC) applications.     

Latent block diagonal representation for subspace clustering

Pattern Analysis and Applications - Spectral-type subspace clustering algorithms have attracted wide attention because of their excellent performance displayed in a great deal of applications in...     

国内废纸造纸废水处理技术新发展

论述了以废纸为原料的造纸厂废水的发生量、污染特征 ,阐述了近年来国内大型造纸厂建造的废纸废水处理工程的典型流程 ,提出了中小型造纸厂处理废纸废水的技术对策 ,指出中国废纸造纸工业已初露废水零排放的曙光。     

Experiments and simulations of the ballistic response of ceramic composite armors

Journal of Mechanical Science and Technology - A lightweight multilayer ceramic composite armor with a sandwich structure back plate was proposed by studying the penetration process, damage...     

基于贝叶斯方法无损识别20钢高温时效状态

以 2 0钢高温时效组织形态为研究对象 ,依据贝叶斯判别原则 ,通过评价超声回波信号特征参数 ,建立样品分类识别判据 ,以待测样品的特征信息验证判据的可靠性 ,有效识别率不低于90 %。     

Discrimination of breast cancer by measuring prostate-specific antigen levels in women's serum

Prostate-specific antigen (PSA) has been reported to be a potential biomarker of breast cancer. Serum PSA of normal women is around 1 pg/mL, which is usually undetectable by current assay methods; thus an ultrasensitive measurement of PSA expression in women's serum is necessary to distinguish normal from malignant breast diseases. To enhance the sensitivity of conventional immunoassay technology for the detection of PSA in sera, we adopted a localized surface plasmon coupled fluorescence fiber-optic biosensor, which combines a sandwich immunoassay with the localized surface plasmon technique. The concentration of total PSA (t-PSA) (from 0.1 to 1000 pg/mL) in phosphate-buffered saline solution and the normalized fluorescence signal exhibit a linear relationship where the correlation coefficient is 0.9574. In addition, the concentration of additional t-PSA in 10-fold-diluted healthly women's serum across a similar range was measured. The correlation coefficient for this measurement is 0.9142. In clinical serum samples, moreover, the experimental results of t-PSA detection show that both the mean value and median of normalized fluorescence signals in the breast cancer group (155.2 and 145.7, respectively) are higher than those in the noncancer group (46.6 and 37.1, respectively). We also examined the receiver operating characteristic curve for t-PSA, and the area under the curve (AUC) is estimated to be 0.9063, the AUC being used to measure the performance of a test to correctly identify diseased and nondiseased subjects.     

A 1.2-V 0.25-/spl mu/m clock output pixel architecture with wide dynamic range and self-offset cancellation

A 10T/pixel CMOS digital pixel sensor with clock count output, ultra low supply voltage, and wide dynamic range is presented. The pixel fabricated by a standard 0.25-/spl mu/m CMOS logic process comprises a reset transistor, a photo-diode, a comparator, and an inverter with pixel size of 9.4/spl times/9.4 /spl mu/m/sup 2/ and 24% fill factor. The amplified logarithmic output response similar to the light response of human eye is demonstrated in this work. The pixel can operate at a supply voltage as low as 1.2 V without affecting its output characteristics. The dynamic range of this cell limited by either the subsequent analog-to-digital circuit resolution or the rising and falling time of output clock is higher than 90 dB with an 8-bit resolution.