CFRP与金属结合件盐雾腐蚀试验研究

采用中性盐雾、乙酸盐雾、铜加速乙酸盐雾3种电化学方法研究碳纤维/环氧复合材料与CR4级冷轧钢板的电偶腐蚀行为.比较了CR4级冷轧钢板与碳纤维复合材料紧固件构成偶对时3种盐雾腐蚀试验的电偶腐蚀性能.结果表明在NaCl电解质溶液体系中电偶腐蚀作用对CFRP影响不大,CFRP基本没有受到腐蚀.     

In Vitro Characterization of Neutralizing Hen Antibodies to Coxsackievirus A16

Coxsackievirus A16 (CA16) is one of the major causative agents of hand, foot, and mouth disease (HFMD). Children aged <5 years are the most affected by CA16 HFMD globally. Although clinical symptoms of CA16 infections are usually mild, severe complications, such as aseptic meningitis or even death, have been recorded. Currently, no vaccine or antiviral therapy for CA16 infection exists. Single-chain variable fragment (scFv) antibodies significantly inhibit viral infection and could be a potential treatment for controlling the infection. In this study, scFv phage display libraries were constructed from splenocytes of a laying hen immunized with CA16-infected lysate. The pComb3X vector containing the scFv genes was introduced into ER2738 Escherichia coli and rescued by helper phages to express scFv molecules. After screening with five cycles of bio-panning, an effective scFv antibody showing favorable binding activity to proteins in CA16-infected lysate on ELISA plates was selected. Importantly, the selected scFv clone showed a neutralizing capability against the CA16 virus and cross-reacted with viral proteins in EV71-infected lysate. Intriguingly, polyclonal IgY antibody not only showed binding specificity against proteins in CA16-infected lysate but also showed significant neutralization activities. Nevertheless, IgY-binding protein did not cross-react with proteins in EV71-infected lysate. These results suggest that the IgY- and scFv-binding protein antibodies provide protection against CA16 viral infection in in vitro assays and may be potential candidates for treating CA16 infection in vulnerable young children.     

大型自动埋弧焊成套设备的研究

本文介绍了一种结构新颖的埋弧焊成套设备,并就埋弧焊成套设备中的一些主要部件作了分析说明。该设备采用的平移式横梁结构、三点式九滚轮导轨装置以及焊缝自动跟踪装置,对满足同平面内多道长焊缝的焊接有独到之处。     

4Cr14Ni14W2Mo钢排气阀离子氮化和离子软氮化渗层的分析和探讨

研究了经不同加热温度鍛造、固溶和750℃时效后钢的晶粒度、孪晶、滑移及碳化物的分布;用光镜、扫描电镜、X-射线衍射仪、俄歇谱仪对钢的基体组织、渗层组织、剥落形貌、应力状态及渗层C、N分布分析表;合适的固溶处理是可以消除过热锻造危害的;离子软氮化中,碳并没有渗入;适当降低炉气中氮含量和辉光电流密度及适当提高氮化温度是消除氮化产生剥落的途径之一。     

印刷线路板电镀废水综合治理

简述线路板电镀废水中氰、铜氨、油墨废水治理方法和混合废水综合治理工艺流程及原理。     

原位TiB2颗粒增强铝基复合材料及其力学性能

对原位反应合成TiB2／A356铝基复合材料微观组织和力学拉伸性能进行了研究。结果表明，原位反应生成的颗粒增强相在复合材料基体中分布均匀，基体与颗粒间的界面洁净。复合材料强度随着颗粒含量的增加显著提高，与基体合金相比，TiB2质量分数为8％的TiB2／A356复合材料强度和弹性模量的提高幅度约为28％，TiB2质量分数为16％的TiB2／A356复合材料强度和弹性模量的提高幅度约为35％。复合材料的断裂主要是由于基体与颗粒界面脱粘，在拉伸应力作用下由此萌生微裂纹并扩展，导致界面处的基体撕裂，从而降低复合材料塑性。     

半固态镁合金流变成形技术及装备

研究了镁合金半固态流变成形技术及装备，结果表明，多功能螺纹元件组合的双螺杆制浆装置制备的浆料晶粒细小（10～50μm)，固相率可在5%～50%范围内调整，封闭式加热保温，快开快关控制的浆料存储与输送装置，较好地解决了浆料连续制备与间歇压铸的配套；生产的半固态压铸件，强度提高了20%以上。     

Ni－Cr－B－Si合金粉末等离子喷涂层的高温性能及其在滚锻模上的应用

研究了Ｎｉ－Ｃｒ－Ｂ－Ｓｉ合金粉末等离子喷涂层的高温抗氧化性能、耐磨性、热稳定性，并介绍了其在连杆毛坯滚锻模上的应用．结果表明，这种涂层的某些高温性能大大优于５ＣｒＮｉＭｏ钢，在冲击载荷不大的场合，可以作为热锻模的强化方法．     

水下隧道穿越管道保护效果测试评价

本文通过对四川气田北干线涪江隧道穿越管道阴极保护电参数的现场测试，取得了实际可信的基础数据，验证了处于水下隧道洞内的穿越段管道，能得到陆上强制电流阴极保护系统的有效保护，保护电流所必经的岩石层和锚喷钢筋混凝土层对保护电流没有构成屏蔽的结论，对管道工程设计和运行管理具有指导作用。     

IFR-2000阻燃聚丙烯热性能研究

研究了用无卤膨胀型阻燃剂IFR-2000作阻燃剂的阻燃聚丙烯的热性能和阻燃性能。