On modeling the design of cellular manufacturing systems

A new optimization model is discussed for the design of cellular manufacturing systems. It is based on an integer programming formulation that updates some other models by eliminating redundant machine assignment and cost coefficients dependent on cell configuration. To reduce computational burdens, a simplified integer programming model and a decomposition algorithm are proposed. Several computer solutions were performed to evaluate the performance of the new model. The computational results are discussed.     

Experimental studies of new ductile coupling beams and multi-storey shear walls

The span-depth ratios of coupling beams to interconnect shear walls are generally small, so that brittle shear failure may occur and lead to reduced ductility. In order to improve the ductility of coupling beams for earthquake loading, a new type of ductile coupling beam is proposed in this paper. Along the middle depth of this beam, a slit through the entire thickness (a narrow hole) near each end and two lateral keyways along the remaining middle part of the span are made. The reductions of the stiffness under service load and the ultimate carrying capacity of the beam due to the weakening mentioned above are small and the ductility is greatly increased. Tests of 4-storey walls interconnected by coupling beams in three different constructions (monolithic beams, beams with a through-slit and new-type beams) indicated that shear walls with the new coupling beams possess the best aseismic behaviours under cyclic loading. The proposed new coupling beam has been used in a high-rise building.     

城市河道堤防工程的岁修与管理

本文通过分析阜阳市现有河道堤防存在的问题，探讨了如何合理进行河道堤防的岁修与管理，为使市区河道建管工作进入良性循环，提出建管结合、自我发展的建议。     

单片机在木板自动剪切机中的应用

由于某厂生产各种规格木板的十多台设备专机,全靠人工手动操作的问题。这些设备与现在日益发展的工业自动化设备相比存在着很大的缺陷。本文利用AT89C51单片机进行控制,并在原设备工作台上加装一台三相异步电动机和一条木板送料传送带,使得工人不用在车间工作就可以控制整个生产过程。显著提高了企业生产效率,达到降低生产成本的效果。     

中国有色金属再生资源回收利用及展望

一、有色金属再生资源利用现状我国是有色金属资源短缺的国家，节约和合理使用资源显得特别重要。世界上工业发达国家对再生资源利用相当重视。近10年来世界再生铜产量已占原生铜产量的40％～55％，美国约占本国原生铜产量的60％，日本约占45％，德国约占80％。世界再生铝产量也占原生铝产量的30％～50％，美国约占本国原生铝的50％，日本约占90％，德国约占45％。世界再生铅产量也占原生铅产量的40％～60％，美国约占本国原生铅的75％，日本约占60％，德国约占55％。锌、镍、镁、锡、锑等再生资源也得到不同程度的利用。     

纳米TiO2复合铁钛防锈颜料的研制及产业化进展

介绍了纳米TiO2复合铁钛防锈颜料的制备原理、工艺、技术指标;描述了铁钛防锈涂料的配方、性能检验和产业化进展情况.     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

锌基重防腐双涂层防护技术在高速公路护栏上的应用

介绍了双涂层防护技术的进展以及锌基重防腐双涂层防护技术在高速公路护栏上的应用。