安徽中小企业发展现状及创新路径研究

近几年,在政府大力扶持之下,安徽中小企业快速发展,已成为推动经济持续、健康发展的重要力量,但在发展过程中也存在一些不容忽视的问题。本文从企业总量、地区分布、企业产值、所有制类型等方面对安徽中小企业进行调查,在此基础上分析安徽中小企业在发展过程中存在的问题,并提出相应的建议和对策,对丰富中小企业发展理论、制定安徽中小企业发展政策具有一定的意义。     

A novel spherical-ordered macroporous CuO nanocatalyst for the electrochemical reduction of carbon dioxide

Journal of Applied Electrochemistry - The electrocatalytic reduction of CO2 is a promising research direction in resource utilization and sustainable energy development. However, there is still a...     

Identification of intra-individual variation in intracranial arterial flow by MRI and the effect on computed hemodynamic descriptors

Magnetic Resonance Materials in Physics, Biology and Medicine - To determine the intra-individual flow variation in serially acquired studies, and the influence of this variation on subsequent...     

纳米金刚石的应用

纳米金刚石不仅具有金刚石所固有优异特性，而且还具有纳米材料所拥有的奇异性能。正是这些综合技术特性，使得它在传统的和新的技术领域中得到应用，并初见成效，本文从超精抛光、润滑、复合镀、磁性录音系统和医疗等方面的应用做了扼要的叙述，指出，纳米金刚石颗粒具有球形和准球形的特点，使得摩擦表面形成滚珠轴承效应，而表现出良好的润滑性，从而避免于摩现象的发生，而对一些主要因接触疲劳或高温磨损而失效的工件，纳米金刚石金属的复合涂层，则具有明显的优越性。     

微小电偶腐蚀电流的准确测定

为了更多地获得电偶腐蚀的信息并揭示其本质规律，提出了电偶腐蚀试验实时监测模型。通过选用不同设备对试样的电偶腐蚀微小电流的测量，结果发现：选用现成设备测量试样的电偶腐蚀微小电流时，测量电流波动非常大，噪声明显超过实际信号输入——电偶腐蚀电流。经自行开发研制的MCD01电偶腐蚀计可以准确的测量腐蚀电流，特别是微小电偶腐蚀电流。     

Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding

Machining characteristics and surface integrity of advanced ceramics, including alumina, alumina–titania, and yttria partially stabilized tetragonal zirconia, were studied under high speed deep grinding conditions. Material removal mechanisms involved in the grinding processes were explored. The material removal in the grinding of alumina and alumina–titania was dominated by grain dislodgement or lateral cracking along grain boundaries. The removal for zirconia was via both local micro fracture and ductile cutting. It was found that under a feed rate of 500 mm/min and for all the wheel speeds used, an increase in the wheel depth of cut (DOC) from 0.1–2 mm slightly improved the ground surface finish, but greatly prolonged the wheel life. This increase did not deepen the subsurface damage layer for the alumina and alumina–titania, but resulted in a slightly deeper damage layer for the zirconia.     

叔胺萃取分离精炼铂的新工艺

用三烷基胺（Ｎ２３５）萃取分离铂，考察了稀释剂、改质剂浓度、料液酸度对分配系数的影响，从复杂的工业料液中，用Ｎ２３５萃取、洗涤、反萃、再生及精炼铂的工艺技术。     

时效对接触线用Cu-Ag-Cr合金性能的影响

分析了固溶温度、时效及时效前冷变形量对Cu - 0 1 %Ag - 0 1 %Cr接触线用合金性能的影响 ,结果表明 :经 870℃固溶、 40 %～ 5 0 %冷变形及 480℃× 1 5h时效处理后 ,合金可获得良好的综合性能。     

四辊热轧机支承辊表面裂纹的修复

本文介绍了用局部不接触法修复轧机支承辊表面裂纹的方法。实践证明,这种方法操作简单、节省金属、效果良好、可在现场进行,而且具有较大的经济效益。     

管理史对MBA的边际效用

近年来 ,我国MBA的社会评价不高 ,其根本原因是MBA毕业生不能满足市场要求。本文通过分析管理史的功能 ,得出学习管理史对MBA的边际效用大 ,MBA培养方案中有必要增设管理史类的课程。