地震属性神经网络油气模式识别技术及其在东海的应用

神经网络油气模式识别技术是综合利用地震属性进行油气预测的技术之一 ,它首先通过计算获得多种地震属性 ,综合分析找出对储层油气比较敏感的地震属性组合 ;然后收集油气井与非油气井的井旁道地震属性 ,组成学习样本并进行神经网络学习 ;最后利用学习结果对储层进行油气预测。该技术在东海某工区的应用结果表明 ,振幅统计类和复数道统计类地震属性是对该地区储层油气最敏感的地震属性组合。神经网络油气模式识别技术可以作为东海地区储层油气预测的一种手段。     

流量计复线泄漏原因分析及对策

针对一起瓦斯流量计复线泄漏原因进行现场调查和原因分析,为了确保该系统长周期安全运行,提出相应的对策。     

Improving Thermal Stability of BaMgAl10O17:Eu Phosphor

Heterogeneous precipitation method was used to prepared surface coating on self-made BaMgAl10O17:Eu phosphor. Results illustrate that the coating film can be silicon dioxide in amorphous state with 50 nm in thickness. Photoluminescence results indicate that the coating layer presents an observable improved effect on the enhancement of thermal stability. When baked at 600 ℃ for 1 h, the luminance of coated BAM keeps at 92% higher than that of uncoated BAM by 23%. This protective effect can be attributed to the high compact degree and uniformity of this amorphous SiO2 coating film which is served as a diffusion block layer to inbreak oxygen atom, thus releases the oxidation extent of Eu2 effectively.     

覆膜滤料的滤尘性能测试方法研究

由于覆膜滤料的结构和性能有别于普通滤料，因而普通滤料的滤尘性能测试方法不完全适用于覆滤料。本文作者在总结实践经验的基础上，提出了在覆膜滤料的滤尘性能测试中应注意的一些问题和应增加的测试项目。     

Adaptive output-feedback tracking of stochastic nonlinear systems

We address the adaptive stabilization and tracking problems for a class of output feedback canonical systems driven by Wiener noises of unknown covariance. Filtered transformation and backstepping techniques are employed in the stochastic control design. We obtain two adaptive controllers that guarantee the global stability in probability for vanishing perturbations or the input-to-state stability in probability for nonvanishing perturbations respectively. The tracking error can converge to a small residual set around the origin in the sense of mean quartic value.     

Novel blood-compatible waterborne polyurethane using chitosan as an extender

A series of novel block polymers of polyurethane (PU) and chitosan have been prepared in two steps. The first step is the preparation of PU prepolymer, obtained from polytetramethylene oxide glycol (PTMO, M_n = 1000), isophrone diisocyanate (IPDI), and 2,2′-dimethylol propionic acid (DMPA), followed by ionizing PU prepolymer with triethylamine (TEA). The second step involves PU chain-extended by water-soluble chitosan of low molecular weight (M_n = 5000) by self-emulsion polymerization method. The sizes of the latex particles, morphology, and copolymer architecture have been characterized by dynamic light scattering (DLS), general tensile test, infrared spectroscopy (IR), surface contact angle measurement, and transmission electron microscopy (TEM). Furthermore, it shows that the addition of chitosan remarkably increases anticoagulative property of PU elastomers confirmed by the recalcification time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

奇异值分解压制随机噪声的方法及应用

针对随机噪声压制问题，通过对多项式确定的同相轴形状重新选取数据矩阵，再对新选取的数据矩阵进行SVD滤波，从而压制随机噪声。通过对矩阵奇异值分解的研究，揭示了奇异值分解的原理和SVD滤波原理，将一个多道地震记录看作一个图，它可分解为由一系列正交的子图，通过对子图适当选择并结合其它手段，从而达到提高信噪比的目的，为奇异值分解在地球物理中的进一步应用提供了理论依据。实际数据应用表明，该方法去噪手段灵活、保真性好、分辨率高，对一些突然的脉冲干扰、侧反射、以及其他的反向干扰有明显效果。     

Preparation and Characterization of Carboxymethyl Chitosan and β-Cyclodextrin Microspheres by Spray Drying

Three kinds of carboxymethyl chitosan/β-cyclodextrin microspheres loaded with theophylline were prepared by spray drying intended for pulmonary delivery. Mucociliotoxicity, permeation rate, and drug release characteristics of the product were investigated. The microspheres obtained by spray drying were found to be spherical with smooth or wrinkled surfaces. The mean particle size was between 3.39 and 6.06 µm. The microspheres demonstrated high product yield (43.7-50.2%), high drug loading (13.7-38.1%), and high encapsulation efficiency (86.9-92.8%). FT-IR indicated that there were interactions of theophylline with carboxymethyl chitosan matrix. Further studies on mucociliotoxicity and permeation confirmed that microspheres had better adaptability and high permeation rate. In vitro drug release from the microspheres was not related to the drug/polymer ratios.     

基于LabWindows/CVI的多线程测控软件设计技术

多线程技术是W in32操作系统的一项重要软件技术。CVI 6.0及其以后版本提供了线程池和异步定时器两种多线程运行机制,为测控软件的设计开发带来了一次技术飞跃。文中结合测控软件设计实例,详细介绍了在CVI平台下多线程编程技术的应用方法。