Effect of Fog and Clouds on the Image Quality in Millimeter Communications

The effect of fog and clouds in millimeter communication is discussed, and the attenuation caused by fog and clouds is reviewed. Signal-to-noise ratio (SNR) of image is derived using relating models of fog and clouds attenuation. According to the relation of image quality and its signal-to-noise ratio, the system behavior is forecasted theoretically. It is shown that the signal-to-noise ratio of receiver at certain transmitter power is inverse with radio wave frequency, from about 70dB at 10GHz to 48dB for fog and 49dB for clouds. The image quality of received signal at certain transmitter power is inverse with radio wave frequency, from about 7 grade at 10GHz to 5.27 grade for fog and 5.37 grade for clouds. The above calculated results are consistent with experimental results.     

Long multifilament Bi-2223 Ag-sheathed superconducting tapes and solenoids

Multifilament Ag-sheathed BiPbSrCaCuO (2223) superconducting tapes containing 49 filaments were fabricated by the powder-in-tube route and the roll-anneal process. The transport critical current densityJ _c was 1.3×10⁴ A cm^–2 at 77 K and 7×10⁴ A cm^–2 at 4.2 K in self-field. A 12-m-long tape was used to construct superconducting solenoids (50, 28, and 14 mm internal diameters) generating dc fields 380–1070 G at 4.2 K. Measurements of the variation ofJ _c with field (0–1.6 T) and bend strain (0–5%) are used to explain the performance of the solenoids. The critical bend strain of tapes was about 1.5%.     

利用信息融合方法的三维特征提取

本文提出了一种基于信息融合的物体三维特征的提取方法，该方法利用两幅互相配准的三维测距图像和灰度图像，来提取多面体的三维特征。首先，通过分析灰度图像中的灰度变化及测距图像中的测距值变化，分别求取各自图像中物体的特征点及特征边；然后，利用两配准图像之间的对应关系，求得所有特征点、面与多边形在三维测距图像中的三维表示；接着，通过分析三维测距图像中所测得的各候选平面上特定点与边处的曲率及法向，验证候选平面     

AlGaAs／GaAs HBT集成电路的CAD

介绍了一套用于ＡｌＧａＡｓ／ＧａＡｓＨＢＴ集成电路的ＣＡＤ软件，它可完成ＨＢＴ的器件模拟、模型参数提取及电路模拟。应用该软件对ＨＢＴ运算放大器进行了模拟，为电路的研制提供了依据。     

氟塑料—石墨板式换热器在高温强腐蚀换热工况中的应用

通过氟塑料－石墨板式换热器在化纤生产中高温强腐蚀换热工况中的实际应用，并与常规换热器的使用情况的对比分析，阐述了这种新型换热设备的特点。     

应用于生物医学的光声光谱技术的改进和实验研究

改进的光声光谱归一化技术，避免了普通的分光法归一化光声光谱技术中分束镜以及锁相放大器动态范围的影响和限制，实现宽光谱范围内准确的光谱测量。氙灯光源功率起伏用修正项修正，误差在5％以内，实现各次实验数据的可比性。     

Nonlinear analysis of the ion-ripple laser with the longitudinal component of the ion-ripple field taken into consideration

Ion-ripple laser, which consists of a relativistic electron beam obliquely propagating through an ion-ripple in a plasma, is investigated by nonlinear numerical simulation. The influence of the component of the ion-ripple field parallel to the beam direction on beam-wave interaction is analyzed. The results show that the longitudinal component of the ion-ripple field has a considerable influence on ion-ripple laser. The operating parameters are also optimized.     

Evaluating the impact of CASE: an empirical comparison of retrospective and cross-sectional survey approaches

The purpose of this paper is to evaluate two methods of assessing the productivity and quality impact of Computer Aided Software Engineering (CASE) and Fourth Generation Language (4GL) technologies: (1) by the retrospective method; and (2) the cross-sectional method. Both methods involve the use of questionnaire surveys. Developers' perceptions depend on the context in which they are expressed and this includes expectations about the effectiveness of a given software product. Consequently, it is generally not reliable to base inferences about the relative merits of CASE and 4GLs on a cross-sectional comparison of two separate samples of users. The retrospective method that requires each respondent to directly compare different products is shown to be more reliable. However, there may be scope to employ cross-sectional comparisons of the findings from different samples where both sets of respondents use the same reference point for their judgements, and where numerical rather than verbal rating scales are used to measure perceptions.     

Overnight closed suction drainage after axillary lymphadenectomy for breast cancer

Axillary lymphadenectomy in breast conservation surgery is associated with substantial morbidity in either seroma formation or infection. Seroma formation in the axilla requiring aspiration occurs in up to 42 per cent of patients treated without drainage. Prolonged outpatient suction drainage reduces but does not eliminate the incidence of seroma formation, while increasing cost, discomfort, and possibly infection rates. We studied the efficacy of overnight closed suction drainage in patients undergoing breast conservation surgery. Fifty consecutive patients undergoing a standard axillary dissection for breast cancer were studied. The axilla was drained with a 7-French closed suction drain. All drains were removed within 23 hours of surgery and prior to discharge from the outpatient surgical center. Patients were examined by the operating surgeon 7 to 10 days after surgery. One patient (2%) experienced a seroma postoperatively. No infections were observed in all 50 patients, and the remaining 49 patients did not experience visible or symptomatic seromas. The number of lymph nodes removed ranged between 5 and 33 with a mean of 15.5 +/- 0.6. Nine out of 50 (18%) patients had metastatic breast cancer to the axillary lymph nodes. Patients undergoing breast conservation surgery benefit from overnight closed suction drainage of the axilla. This short-term method reduces the incidence and the inherent morbidity of axillary seroma formation.