蜂窝式轴压构件腹板局部稳定问题研究

运用有限元分析软件ANSYS得出实腹式构件在轴心压力作用下的腹板弹性屈曲系数，验证有限元模型建立的准确性。然后运用ANSYS软件计算蜂窝式构件在轴力作用下腹板弹性屈曲系数，研究其随参数变化的趋势。     

基于MEMS技术的红外成像焦平面阵列

选用Au和LPCVD的低应力SiNx薄膜材料,采用MEMS技术研制了新型间隔镀金热隔离结构的薄膜镂空式非制冷红外成像焦平面阵列,并应用光学读出的方法成功地在室温(27.47℃)背景下获得了人体的热像.实验证明间隔镀金热隔离结构的引入有效抑制了热传导对变形梁温升的限制,从而大大降低了系统的噪声等效温度差(NETD),NETD达到约200mK.     

用不同方法评价0.18μm CMOS 工艺栅氧击穿电压和击穿电量

利用击穿电压和击穿电量这两个参数评价标准0.18μm CMOS工艺栅氧的可靠性,获得击穿电压和击穿电量的两个常用方法是电压扫描法和电流扫描法.对用这两种方法得到的击穿电压和击穿电量进行了对比.通过对比,发现测试方法对击穿电压的影响非常小.但是测试方法却可以在很大程度上影响击穿电量.用电流扫描法获得的击穿电量要比用电压扫描法的要大,这一差别可以从两种方法不同的电流-电压曲线中得到解释.同时,通过考察Weibull分布的斜率还发现,击穿电压值的分布斜率要比击穿电量大的多,而且曲线拟合得更好.这说明用击穿电压获得的分析结果更可靠.综合以上结果,可以认为对0.18μm CMOS工艺可靠性评价而言,击穿电压是比较合适的评价指标.     

CPW-fed circular slot antenna with slit back-patch for 2.4/5 GHz dual-band operation

A circular slot antenna fed by a coplanar waveguide (CPW) is proposed for dual-band operations. Dual frequency bands that cover the 2.4 GHz (2400-2484 MHz) and 5 GHz (5150-5825 MHz) bands were obtained by embedding a pair of slits in the circular back-patch that is printed on the backside of the substrate and concentric with the circular slot. This design resulted in broadside far-field patterns with low cross-polarisation levels in both frequency bands and a small antenna size of 40/spl times/40 mm with the ground plane regarded as part of the antenna structure.     

城市生活垃圾中废弃木料流化床热解气化试验研究

为开发适合我国城市生活垃圾处理的低污染气化熔融技术，对城市生活垃圾中广泛存在的废弃木料组分进行了流化床热解与气化试验。流化床中，在反应温度400～700℃、过量空气系数0～0．8的范围内，对木料进行了系统的热解气化试验，分析了反应产物特性及其产量变化规律。结果表明，热解温度5000℃，热解油产量最大，可占原料质量的38％，热解气产量随温度增加而增大；气化温度600℃、过量空气系数0．4时，气化效率最高，达到73％，此时每标准立方米气化气热值为5800kJ，气化气产率为2．01m^3／kg；并进行相关的反应特性及机理分析。     

New experimental results of millimetre-wave whispering gallery modedielectric resonators excited by microstrip lines

Presents an experimental investigation of planar millimetre-wave dielectric resonators acting on whispering gallery modes and excited by microstrip lines. Experimental results including measured resonant frequencies and loaded quality factors obtained in both Ka bands (26.5-40 GHz and 90-100 GHz) are presented     

Water‐assisted formation of honeycomb films of poly(L‐lactic‐co‐glycolic acid)

The ordered honeycomb structures of poly(L ‐lactic‐co‐glycolic acid) and poly(D ,L ‐lactic‐co‐glycolic acid) fabricated in a humid atmosphere were reported in this paper. It was found that surfactants were important in the formation of honeycomb films of hydrophobic polymer. The affecting factors, such as the environment temperature, the atmosphere humidity, and the concentration of the polymer solution of the honeycomb porous structure, were also tested. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1013–1018, 2006     

DES算法的S盒的设计优化

DES(数据加密标准)算法被广泛应用于软件加密和硬件加密。S盒是DES算法中的一个关键环节,它的设计好坏直接影响DES的加密性能。VHDL(甚高速集成电路硬件描述语言)是借助EDA(电子设计自动化)工具进行硬件设计的基本描述语言。文中结合VHDL的特点,对使用VHDL设计S盒进行了一些分析,综合速度、资源利用率等提出了最优方案。     

邻苯二酚紫—溴化十六烷基三甲铵分光光度法测定钢中微量铬

本文研究了PV—CTMAB光度法测定铬.在HAc—NaAc缓冲介质中,显色配合物最大吸收位于650nm处,表观摩尔吸光系数为6.2×10~4.铬含量在0～14μg/25ml范围内符合比尔定律.本方法应用于钢中微量铬的测定,结果满意.