浅谈多媒体教学以信息管理中心为例

高职教育的特点就是以适应社会需要为目标、以培养技术应用能力为主线设计学生的知识、能力、素质结构和培养方案,毕业生应具有基础理论知识适度、技术应用能力强、知识面较宽、素质高等特点.以“应用”为主旨来构建课程和教学内容体系.     

乙烯二聚制高纯丁烯－1技术经济评价

本文对生产高纯度丁烯－１的Ａｌｐｈａｂｎｔｏｌ工艺进行了技术经济评价，认为该工艺条件简单、反应条件温和，而且投资少，所以很适合事在发展中国家应用。     

A low‐profile antenna with circularly polarized reconfigurable and omnidirectional radiation patterns

A low profile circularly polarized (CP) antenna with reconfigurable polarization is designed and presented, which can radiate omnidirectional patterns that can be switched between left‐hand circularly polarized (LHCP) and right‐hand circularly polarized (RHCP). A pair of arc‐shaped complementary dipoles is acted as reconfigurable elements by bridging four pin diodes at the dipole arced arms. A meander phase shift line is employed to connected the arc dipole arms and plate cavity to adjust the phase relationship of two sources. The proposed antenna exhibits the omnidirectional radiation pattern by combining six identical elements placed in a circular array configuration. 24 p‐i‐n diodes are exploited to six elements, by manipulating the dc bias voltage across the diodes, the polarization state of the antenna can be switched. The patterns of the antenna are similar to that of a dipole, but its size is only about Φ0.87 × 0.029λ₀ at 5.8 GHz. The overlapped bandwidth of measured 3‐dB axial ratio (AR) and 10‐dB return loss is 5.724‐5.87 and 5.738‐5.91 GHz for two polarization states, which are right on the target of ISM band. It can be well adapted to medical diagnosis systems.     

基于MEMS电容式加速度计的闭环读出电路设计

设计了面向圆片级封装的一种闭环加速度计读出电路.在基于电容式微加速度计结构的读出电路设计中考虑了寄生电容对整个系统的影响.用MATLAB SIMULINK对所设计的读出电路进行了建模仿真.在仿真过程中分析了噪声、圆片级封装与普通封装的寄生参数及实际工艺中流水结构的不对称性的影响并进行了比较.结果表明,所设计传感器及读出电路的非线性误差在量程±20 gn范围内小于0.5％;圆片级封装的稳定时间在2 ms,小于普通封装的稳定时间;基于圆片级封装的对称性梳齿结构的输出电压灵敏度为328 mV/gn.     

冶炼不锈钢泡沫渣的实验研究

从理论上阐述冶炼不锈钢时熔渣的发泡机理。并根据上海三钢公司的情况，在2500Hz的中频感应炉上时熔渣进行发泡高度的实验，找出发泡性能较好的渣系，研究渣中各成分对发泡性能的影响。     

Fuzzy adaptive networks in machining process modeling: surface roughness prediction for turning operations

Due to the complexity of the machine tool structure and the cutting process, the dynamics of machining processes are still not completely understood. This is especially true due to the demand of high-speed machining to increase productivity. In order to model and control these complex processes, new approaches, which can represent complex phenomenon combined with learning ability, are needed. The combined neural–fuzzy approach appears to be ideally suited for this purpose. In this paper, the recently developed fuzzy adaptive network (FAN) is used to model surface roughness in turning operations. The FAN network has both the learning ability of neural network and linguistic representation of complex, not well-understood, vague phenomenon. Furthermore, it can continuously improve the initially obtained rough model based on the daily operating data. To illustrate this approach, a model representing the influences of machining parameters on surface roughness is established and then the model is verified by the use of the results of pilot experiments. Finally, a comparison with the results based on statistical regression is provided.     

移动图形处理器的现状、技术及其发展

3D图形绘制技术已经渗透到各种移动设备中.相对于桌面PC,移动设备图形处理需要以更低的功耗、更有限的内存带宽和较低的运算能力实现高性能、高质量的图形显示效果.文中介绍了移动图形处理器发展现状,从硬件设计方面分析了这一领域未来面临的挑战;分析了当前移动图形处理器中区块式和立即式渲染的架构特点,总结了渲染过程中加速数据流计算方法和芯片低功耗设计方法.最后展望了移动图形处理器的发展趋势.     

一种基于扩展不完全Kripke结构的三值逻辑模型检测方法

多值模型检测是解决形式化验证中状态爆炸问题的一种重要方法,三值模型检测是多值模型检测的基础,其中如何检验不确定状态的真值是一难点。针对不确定状态检验,提出了一种模型检测方法,首先对不完全Kripke结构PKS进行了扩展,然后在扩展后的模型上给出了检测不确定状态真值的方法,最后给出了基于扩展不完全Kripke结构的三值逻辑模型检测算法。与已有的三值逻辑模型检测算法相比,该算法降低了算法复杂度,完善了对于不确定或不一致信息的处理,从而增强了三值逻辑模型检测的实用性。     

Kernel generalized fuzzy c-means clustering with spatial information for image segmentation

The generalized fuzzy c-means clustering algorithm with improved fuzzy partition (GFCM) is a novel modified version of the fuzzy c-means clustering algorithm (FCM). GFCM under appropriate parameters can converge more rapidly than FCM. However, it is found that GFCM is sensitive to noise in gray images. In order to overcome GFCM?s sensitivity to noise in the image, a kernel version of GFCM with spatial information is proposed. In this method, first a term about the spatial constraints derived from the image is introduced into the objective function of GFCM, and then the kernel induced distance is adopted to substitute the Euclidean distance in the new objective function. Experimental results show that the proposed method behaves well in segmentation performance and convergence speed for gray images corrupted by noise.     

基于SOC的串联锂离子电池组均衡策略研究

由于一致性问题的存在,成组电池在可用容量、使用寿命等方面远不及单体电池,电池组的均衡管理对电池的成组使用者有着重要的实际意义.论文就针对锂离子串联电池组的均衡技术进行了研究,首先介绍了电池组一致性问题产生的原因,指出均衡管理的重要意义,分析了锂离子电池组SOC的一致性和基于SOC的均衡策略,详细阐述了基于SOC的均衡技术实现,最终搭建实验平台进行测试,验证了所使用的均衡策略和硬件电路的有效性.