Colloidal silica removal in coagulation processes for wastewater reuse in a high-tech industrial park.

Four experiments of coagulation and flocculation were conducted to investigate the characteristics of colloidal silica removal in a high-tech industrial wastewater treatment plant for reclamation and reuse of the effluent. Experimental results illustrated that poly-aluminium chloride (PACl) showed higher performances on colloidal silica removal than alum. Interestingly, the two coagulants demonstrated the same capacity on silica removal. The specific silica removal capacity was approximately 0.135 mg SiO2/mg Al2O3 when the dosage of coagulants was in the range 30-150 mg/L Al2O3. In addition, the silica was reduced significantly at the condition of pH above 8. Experimental data implied that precipitation of aluminium flocs was the major mechanism for colloid silica removal in PACl and alum coagulation, besides, charge adsorption was also important for improving removal efficiency. Moreover, the addition of polyacrylic acid (PAA) as a flocculant could slightly advance silica removal in the PACl coagulation. The combined PACl/PAA/flocs coagulation was effective for the removal of colloidal silica, soluble COD, and turbidity and also suitable as a pretreatment unit in wastewater reclamation and reuse processes.     

Composition Range of Amorphous Mg-Ni-Y Alloys

Based on the thermodynamic point of view, a method for predication of the composition range of amorphous ter-nary alloys was proposed. The composition range of amorphous ternary alloys is determined by the comparison of the excess free energy of the amorphous alloy and the free energy of competing crystalline states. The free energy is extrapolated from the data of three binary alloys by using Toop‘s model. The method was applied to predict the composition range of amor-phous Mg-Ni-Y alloys. The theoretical results are in good agreement with the available experimental results. It indicates that the present method can be used to predict the composition range for amorphous ternary alloys.     

钇铁石榴石薄膜材料的光吸收谱及Bi,Al掺入对谱的影响研究

采用单离子晶场跃迁模型，拟合出钇铁石榴石（ＹＩＧ）薄膜材料的光吸收谱，与实验谱吻合得较好。从实验和理论上分析了（ＢＩＡＩ）ＹＩＧ 薄膜材料的光吸收谱，结果表明，Ａｌ３＋离子的作用如同稀释剂一样，减小了光吸收，Ｂｉ３＋离子由于其强的自旋轨道耦合作用，增大了跃迁振子强度和跃迁线宽，从而增大了光吸收损耗，在此基础上所作的（ＢｉＡｌ）ＹＩＧ的理论谱与实验谱符合得较好。     

Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

On the current delivery limit of semiconducting carbon nanotubes

The current carrying capacity of single-walled semiconducting carbon nanotubes (CNTs) is studied by self-consistent quantum simulations using the non-equilibrium Green’s function formalism with the self-consistent Born approximation. The simulation shows that the current carrying capacity depends on the bias regime and is drastically different from that of metallic tubes. For long CNTs (with a length much longer than zone boundary and optical phonon scattering mean free path), the current saturates around 20 μA in the forward bias regime with unipolar transport due to phonon scattering. In ambipolar transport regime, the current delivery limit is still about 20 μA due to recombination of electron and hole currents. In contrast, for short semiconducting CNTs, the current delivery capacity can be above 25 μA in the unipolar transport regime and further double in the ambipolar transport regime. In reverse bias regime, the current of a long CNT can exceed 20 μA due to the second subband conduction and increased electron injection from the drain. The simulation provides a coherent explanation to the dependence of current delivery limit on bias regime and channel length, which is consistent with recent experiments.     

双层柱面网壳采用粘滞阻尼器的减震参数分析

研究了粘滞阻尼器对双层柱面网壳减震效果的主要影响参数和影响规律。通过考虑阻尼器不同的设置方式、设置位置和数量、阻尼系数,以及不同的网壳矢跨比,线性阻尼器与非线性阻尼器的比较等,进行了一系列减震参数分析。结果表明,替换方式优于附加方式,替换杆件的数量存在临界值,阻尼系数存在最优范围,网壳矢跨比的影响显著,非线性阻尼器和线性阻尼器的减震效果基本相同等。这些规律对实际工程应用具有一定的参考意义。     

寄生电容不敏感的开关电容乘法器的设计与分析

本文论述了寄生电容不敏感型开关电容四象限模拟乘法器的设计，并提出了一种新型的电路结构，分析了它的性能，以及元器件的非理想特性对其性能的影响和采取的补偿方法。     

中国新移动运营商3G发展策略

通过对3G的市场分析、技术分析、制式选择关键因素分析和经济分析,得出了中国新移动运营商3G的发展策略。无论从基于频率资源与制式关系的考虑,基于选择3G主流制式的考虑,还是从基于利用非对称频段资源、采用TD-SCDMA混合组网的考虑,对新的运营商来说,采用WCDMA来建设移动通信系统都是必要和有利的选择。     

致力于持续增长的战略——在2002年信息产业经济年会上的演讲(摘要)

在电信业,设备制造商采取了两种截然不同的战略,即中国通讯厂商的紧缩战略和国外跨国公司的扩张战略。国内通讯企业实现持续增长面临着从投资增长型向效益增长型的转变和加入世贸组织后的冲击和考验。普天公司在寻找持续增长的道路时,恪守的理念是:品牌至上、合作共赢、关注产业链、激活组织。     

风机盘管在空调工程中的应用及分析

根据风机盘管的特性，分析了设备运行状况和能量调节方法等方面的有关问题，指出了风机盘管采用变风量的方法调节能量所存在的弊端，同时还分析了在空调设计中，如何充分运用这些特点来合理选型，并对产品开发方面提出了建议。