化学交联聚丙烯的研究

本文通过测定交联聚丙烯的凝胶含量及流变性，研究了以Ｎ，Ｎ＇－间苯基双马来酰亚胺作为交联助剂的过氧化二异丙苯引发聚丙烯的交联反应，结果表明ＰＰ必须交联助剂的存在下才能发生交联反应，其交程序与引发剂，交联助剂的含量以及工艺条件有关。     

The influence of processing route on the structuring and properties of high‐density polyethylene (HDPE)/clay nanocomposites

The effect of different processing routes on structure and properties of high‐density polyethylene (HDPE)‐clay nanocomposites was assessed. Different compatibilizer/clay ratios (α) were also studied to determine if interactions exist between processing route and polymer‐clay compatibility. HDPE/HDPE‐g‐MA/clay with α values of 1 to 4 were melt compounded (twin screw extrusion), and then processed via three routes: compression moulding, compression moulding followed by biaxial stretching or blown film extrusion. The structure was examined using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Tensile and oxygen barrier properties were determined. It was found that biaxial extensional forming produced the best enhancement in properties. An interaction between processing route and polymer‐clay compatibility is evident. Halpin‐Tsai (H‐T) model was employed to predict relative modulus values. It showed good agreement with the experimental data. For biaxial extension at α = 4.0, the experimental relative modulus is greater than the predicted value. This may indicate the existence of a “nano” effect at the polymer‐clay interface. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Glycans in Medicinal Chemistry: An Underexploited Resource

The biological relevance of glycans as mediators of key physiological processes, including disease‐related mechanisms, makes them attractive targets for a wide range of medical applications. Despite their important biological roles, especially as molecular recognition elements, carbohydrates have not been fully exploited as therapeutics mainly due to the scarcity of structure–activity correlations and their non‐drug‐like properties. A more detailed understanding of the complex carbohydrate structures and their associated functions should contribute to the development of new glycan‐based pharmaceuticals. Recent significant progress in oligosaccharide synthesis and chemical glycobiology has renewed the interest of the medicinal chemistry community in carbohydrates. This promises to increase our possibilities to harness them in drug discovery efforts for the development of new and more effective, synthetic glycan‐based therapeutics and vaccines.     

Production of biogenic amines by lactic acid bacteria and enterobacteria isolated from fresh pork sausages packaged in different atmospheres and kept under refrigeration

The occurrence of in vitro amino acid activity in bacterial strains associated with fresh pork sausages packaged in different atmospheres and kept in refrigeration was studied. The presence of biogenic amines in decarboxylase broth was confirmed by ion-exchange chromatography and by the presence of the corresponding decarboxylase genes by PCR. From the 93 lactic acid bacteria and 100 enterobacteria strains analysed, the decarboxylase medium underestimates the number of biogenic amine-producer strains. 28% of the lactic acid bacteria produced tyramine and presented the tdc gene. All the tyramine-producer strains were molecularly identified as Carnobacterium divergens. Differences on the relative abundance of C. divergens were observed among the different packaging atmospheres assayed. After 28 days of storage, the presence of argon seems to inhibit C. divergens growth, while packing under vacuum seems to favour it. Among enterobacteria, putrescine was the amine more frequently produced (87%), followed by cadaverine (85%); agmatine and tyramine were only produced by 13 and 1%, respectively, of the strains analysed. Packing under vacuum or in an atmosphere containing nitrogen seems to inhibit the growth of enterobacteria which produce simultaneously putrescine, cadaverine, and agmatine. Contrarily, over-wrapping or packing in an atmosphere containing argon seems to favour the growth of agmatine producer-enterobacteria. The production of putrescine and cadaverine was associated with the presence of the corresponding amino acid decarboxylase genes. The biogenic amine-producer strains were included in a wide range of enterobacterial species, including Kluyvera intermedia, Enterobacter aerogenes, Yersinia kristensenii, Serratia grimesii, Serratia ficaria, Yersinia rodhei, Providencia vermicola and Obesumbacterium proteus.     

A novel supercapacitor-fuel cell hybrid cell

A monolithic hybrid fuel cell (MHFC) with a novel configuration was proposed in an effort to improve the fuel cell performance during instantaneous power changes. A modified direct methanol fuel cell (DMFC) with a layer of hydrous ruthenium dioxide (RuO2·xH2O) sandwiched between the anode catalyst layer and membrane was used to demonstrate the principle of the MHFC. Experimental results indicate that the RuO2·xH2O layer is equivalent to a resistor-capacitor transmission line and functions similar to a capacitor in parallel with the anode electrode. The improvement in dynamic response of the MHFC was experimentally confirmed under step current change and square current pulse operating. The ionic conductivity of the RuO2·xH2O layer was also obtained.     

C3S and C2S hydration in the presence of Na2CO3 and Na2SO4

This study analyses the behavior of calcium silicates C₃S and C₂S hydrated in two alkaline media, Na₂CO₃ and Na₂SO₄. The silicates were synthesized with laboratory reagents and hydrated in water, to which solid‐state alkaline activators with 4 wt% Na₂CO₃ or 4 wt% Na₂SO₄ were added. Two‐ and 28‐day mechanical strength values were determined and the reaction products were characterized with XRD, SEM/EDX, and ²⁹Si and ²³Na MAS NMR. The findings showed that the presence of Na₂CO₃ hastened hydration kinetics and stimulated early‐age mechanical strength development in both silicates. The most significant effect of sodium sulfate, however, was observed in the 28‐day material in both silicates, in which it raised strength by stimulating the precipitation of C–S–H gels with a high percentage of Q² units.     

Formation and Emission of Submicron Particles in Pulverized Olive Residue (Orujillo) Combustion

The particle formation and emission in the combustion of pulverized olive residue (orujillo) is studied in this work. The fuel has been burned in controlled combustion conditions in an entrained flow reactor. A bimodal distribution with mode peaks at 155 nm and 110 μm is found for fly ashes. Coarse particles have been characterized by laser diffractometry and SEM, while fines have been analyzed by low-pressure impaction, DMA, SEM, and X-ray diffraction. Particles with Dp < 1 μm are composed of only K₂SO₄ and KCl in the same mass proportion, and possibly K₃PO₄ (less than 7% in mass). The use of a new particle sampling probe and a TEM allowed a detailed study of the formation of these particles when flue gases cool down. K₂SO₄ is experimentally found to start nucleation over 900°C, while KCl is not observed at this temperature. Condensation of KCl on these nuclei is observed in a sample taken at 560°C. These “formation steps” are in good agreement with both theoretical calculations by other authors and a simple equilibrium schema shown here.     

Determination of Minimum Spouting Velocities in Conical Spouted Beds

Minimum spouting velocities in conical spouted beds have been obtained from pressure drops versus the superficial gas velocity curves, based on both increasing and decreasing the superficial gas velocity. It has been shown that the minimum spouting velocity from decreasing the superficial gas velocity is lower than from increasing the superficial gas velocity in most cases. This phenomenon is similar to that in conventional spouted beds and different from the early works. The experimental results also showed that there isn't significant difference in the pressure drop and U_ms under identical operating conditions between semi‐circular and circular conical spouted beds, and the same U_ms can be obtained from absolute pressure drops at any position above the gas inlet. The U_ms is found to increase with increasing the cone angle and static bed height, as well as the gas inlet diameter to a less extent.     

Morphological contrast index based on the Weber's law

In this article, a morphological contrast index based on the Weber's law is proposed to quantify the contrast in a processed image. This measure involves the contours of the image along with its background. The proposal made here is applied to detect the image with higher contrast, and also identify the enhanced image most similar to the original. Moreover, the contrast index is compared with other four indexes reported in the current literature. © 2012 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 22, 137–144, 2012