Effects of molecular weight of polysulfone on phase separation behavior for cyanate ester/polysulfone blends

The effects of molecular weight of polysulfone (PSF) on the morphology of bisphenol‐A dicyanate (BADCy)/PSF blends were studied. Because the viscosity of the blend increased and the miscibility between BADCy and PSF decreased with the increase of PSF molecular weight, these two competing effects on the phase‐separation were investigated. It was observed that the effect of viscosity was predominant: the viscosity of the blends at the onset point of phase separation increased with the increase of PSF molecular weight. The phase separation mechanism depends on the viscosity of the blends at the onset point of phase separation and determines the morphology of the blends. Because the increasing viscosity with increasing the molecular weight of PSF suppressed the nucleation and growth even with 10 phr of PSF content, phase separation occurred through spinodal decomposition to form the combined morphology having both PSF particle structure and BADCy particle structure. The combined morphology and the BADCy particle structure were obtained with a smaller amount of high molecular weight PSF content. This indicates that the viscosity of the blends at the onset point of phase separation is the critical parameter that determines the morphology of the blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 921–927, 2000     

Preparation of high molecular weight poly(N‐vinylcarbazole) in high yield by low‐temperature precipitation polymerization of N‐vinylcarbazole

To produce high molecular weight poly(N‐vinylcarbazole) (PVCZ) with high conversion, N‐vinylcarbazole (VCZ) was heterogeneously polymerized in methanol at 30, 40 and 50 °C using a low temperature initiator, 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN), and the effects of polymerization temperature and concentration of initiator and solvent on the polymerization behaviour and molecular parameters of PVCZ investigated. Globally, experimental results correspond to predicted ones. Low polymerization temperature using ADMVN and a heterogeneous system using methanol proved to be successful in obtaining poly(N‐vinylcarbazole) (PVCZ) of high molecular weight and high conversion with small temperature rise during polymerization, although free radical polymerization by azoinitiator was used. The polymerization rate of VCZ in methanol at 30 °C is proportional to the 0.88th power of ADMVN concentration. The molecular weight is higher and the molecular weight distribution is narrower with PVCZ polymerized at lower temperatures. For PVCZ produced in methanol at 30 °C using an ADMVN concentration of 0.0001 mol/mol of VCZ, a weight average molecular weight of 1 750 000 g mol⁻¹ is obtained, with a polydispersity index of 1.82 © 2000 Society of Chemical Industry     

Plasmonic Core–Shell–Satellites with Abundant Electromagnetic Hotspots for Highly Sensitive and Reproducible SERS Detection

In this work, we develop a Ag@Al₂O₃@Ag plasmonic core–shell–satellite (PCSS) to achieve highly sensitive and reproducible surface-enhanced Raman spectroscopy (SERS) detection of probe molecules. To fabricate PCSS nanostructures, we employ a simple hierarchical dewetting process of Ag films coupled with an atomic layer deposition (ALD) method for the Al₂O₃ shell. Compared to bare Ag nanoparticles, several advantages of fabricating PCSS nanostructures are discovered, including high surface roughness, high density of nanogaps between Ag core and Ag satellites, and nanogaps between adjacent Ag satellites. Finite-difference time-domain (FDTD) simulations of the PCSS nanostructure confirm an enhancement in the electromagnetic field intensity (hotspots) in the nanogap between the Ag core and the satellite generated by the Al₂O₃ shell, due to the strong core–satellite plasmonic coupling. The as-prepared PCSS-based SERS substrate demonstrates an enhancement factor (EF) of 1.7 × 10⁷ and relative standard deviation (RSD) of ~7%, endowing our SERS platform with highly sensitive and reproducible detection of R6G molecules. We think that this method provides a simple approach for the fabrication of PCSS by a solid-state technique and a basis for developing a highly SERS-active substrate for practical applications.     

Copolymerization of styrene and ethylene with mononuclear and dinuclear half-titanocenes

With mononuclear half-titanocenes such as CpTiCl₃, IndTiCl₃, and Me₅CpTiCl₃, as well as the constrained geometry catalyst (CGC) and a new dinuclear hexamethyltrisiloxanediylbis(cyclopentadienyltitanium trichloride) (TSDT), the copolymerization of styrene and ethylene was examined. The thermal properties and structure of copolymerization products were investigated with differential scanning calorimetry and ¹³C-nuclear magnetic resonance. In addition, the raw polymer was separated into homopolymer and copolymer with an extraction method and cross fractionation chromatography. With the above analysis, it was concluded that the raw polymer obtained with CpTiCl₃ and IndTiCl₃ was a mixture of syndiotactic polystyrene and polyethylene homopolymers with 10–30 wt % copolymer, whereas that produced by Me₅CpTiCl₃ and TSDT was a homopolymer mixture with a negligible amount of copolymer. Only CGC produced the copolymer of styrene and ethylene perfectly. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:2187–2198, 1998     

A new higher-order hybrid-mixed curved beam element

The purpose of this work is to show the successful use of nodeless degrees of freedom in developing a highly accurate, locking free hybrid-mixed C⁰ curved beam element. In the performance evaluation process of the present field-consistent higher-order element, the effect of field consistency and the role of higher-order interpolation on both displacement-type and hybrid-mixed-type elements are carefully examined. Several benchmark tests confirm the superior behaviour of the present element. © 1998 John Wiley & Sons, Ltd.     

Continuous glass-fiber reinforced nylon 6 by using a new impregnation die

This paper describes a process for the manufacture of thermoplastic composites reinforced with continuous fibers and the equipment for producing such a product. The process makes it possible to expand and reconsolidate the fibers of rovings by passing them into the impregnation die filled with molten thermoplastic. The die consists of three rollers and numerous pins fixed on the roller surfaces over which the roving is drawn under tension. The material chosen to illustrate the die process is a glass-fiber reinforced nylon-6, PA6. The void content and mechanical properties were measured to investigate the influence of processing variables on properties. These process experiences indicated that poor fiber resin impregnation and fiber damage, due to harsh prepreg fabrication, result in low values for longitudinal tensile strength and impact properties. However, the composites manufactured by this technique show a significant improvement in mechanical properties over conventionally prepared thermoplastic composites.