Investigation of MEMS Piezoresistive Pressure Sensor with a Freely Supported Rectangular Silicon Carbide Diaphragm as a Primary Sensing Element for Altitudinal Applications

Silicon - Silicon and Polysilicon are used as piezoresistive materials in MEMS (Micro Electromechanical system) piezoresistive pressure sensors because of its reproducibility and enhanced...     

Electrophoretic studies of chhana whey and effect of temperature and time of storage on its quality

Chhana whey contains less protein than Cheddar cheese whey, acid casein and cottage cheese whey, and the protein composition is quite different. Electrophoretic methods demonstrated that most of the proteins in chhana whey were denatured, and there was considerable variation in the protein composition between samples of chhana whey and paneer whey obtained from different sources. The effect of storage temperature and time (up to 10 h at 40°C, 50°C, 60°C, 70°C and 80°C) on the quality of chhana whey was investigated. There were no significant changes in the pH and titratable acidity in any of these cases. Electrophoretic separation showed no qualitative changes in the protein composition pattern of chhana whey after up to 10 h of storage at 70°C.     

Fluid flow characterization with tube viscometer data

Pressure gradients and the corresponding mass flow rates of five different non-Newtonian fluid foods: 1% solutions of sodium alginate and CMC, 1.5% CMC solution, two different tomato ketchups, oyster sauce, in four different diameter stainless steel tubes ranging from 7.51 to 16.34 mm i.d. were recorded using a tube viscometer capable of operating in both transient and continuous flow modes. The flow was confined to the laminar flow regime and appreciable slippage occurred in all cases. Power law parameters for the tube flow obtained from the plots of wall shear stress versus apparent wall shear rate are presented for various time-independent fluids in different diameter tubes in original and slip-corrected forms. Such experimental data should prove useful in developing an understanding of flow characterization of non-Newtonian fluids.     

Chemical-mechanical planarization of Cu and Ta

As device dimensions continue to shrink, multilevel (>8) interconnects are required to efficiently implement complex logic device designs in a single silicon chip. When the number of metal interconnect levels increases, the available depth-of-focus budget of lithographic tools imposes stringent planarity requirements that can only be met currently by chemical-mechanical planarization (CMP). Improved speed and performance are extracted from such devices by switching to copper from Al/Cu as the interconnect metal and to lower dielectric constant inner layers. Use of copper also requires the simultaneous introduction of diffusion-barrier/adhesion-promotion layers of tantalum or TaN. This paper reviews some of the recent advances in the fundamental understanding of the interplay between the mechanical and chemical components of the material-removal process during CMP of copper and tantalum films. The emphasis will be on the role of different process variables in slurries containing silica or alumina abrasives in hydrogen peroxide/glycine solutions. For more information, contact S.V. Babu, Clarkson University, Center for Advanced Materials Processing & Department of Chemical Engineering, Clarkson University Box 5705, Potsdam, New York 13699-5705; (315) 268-3999; fax (315) 268-6654; e-mail babu@clarkson.edu.     

Determination of rifampicin and isoniazid in pharmaceutical formulations by HPLC

A liquid chromatographic procedure for the analysis of Rifampicin (RIF) and Isoniazid (INH) in pharmaceutical dosage forms utilizing reverse phase chromatography was developed. Isolation of analytes was carried out under isocratic conditions with a octadecylsilane column and an aqueous mobile phase containing Methanol (75%) and 0.02 M Disodium Hydrogen Orthophosphate (25%) with pH 4.5 adjusted with orthophosphoric acid. The detection was done at 254 nm.

The method is unique in analysing Rifampicin precisely in combination with Isoniazid particularly in liquid formulation. The method is specific and can distinctly isolate the degradation product in suspension.     

Impedance of a goat eye lens

Cyclins are essential proteins in cell cycle control, and their deranged expression has been reported to be associated with malignant transformation. Involvement of cyclins in the development of endometrioid carcinomas of the endometrium was studied immunohistochemically using antibodies against both cyclin A and tumor suppressor gene product p53, and their expression was compared with that of Ki-67 antigen. Sixty-two cases of endometrial endometrioid carcinoma and 20 cases of normal endometrium (10 proliferative and 10 secretory phase) were examined. Of the 62 endometrioid carcinomas, atrophic endometrium and hyperplasia were found adjacent to the cancers in 30 and 19 cases respectively. Cyclin A was expressed in < 1% of the glandular cells of normal endometrium in the proliferative phase and in hyperplasia, but was negligible in normal secretory phase and atrophic endometrium. p53 was almost always negative in normal endometrium and hyperplasia. Of the 62 endometrioid carcinomas, 12 tumors (19.4%) overexpressed cyclin A and 21 tumors (33.8%) overexpressed p53 (positive cells > 1%). Cyclin A and p53 were more frequently expressed in poorly differentiated tumors than in well differentiated tumors (cyclin A, p = 0.002; p53, p = 0.016). In addition, cyclin A-positive cells were topographically related to those cells positive for p53 as well as Ki-67. In conclusion, the abnormal expression of cyclin A and p53 is associated with high-grade endometrial endometrioid carcinomas.     

Planar optical waveguides with arbitrary index profile: an accuratemethod of analysis

We present here an improvement of the existing modified Airy function (MAF) method. The results of our study show that the improvement gives extremely accurate propagation constants and also the modal fields for planar waveguides with arbitrary index profile     

Joint image compression–encryption using discrete fractional transforms

Exchange of data in the form of text and image on internet is in fast progression and it is spawning new compression and encryption algorithms for bandwidth and security respectively. We have proposed a new kind of joint algorithm using discrete fractional transforms for compression–encryption of image. In this algorithm, the discrete fractional Fourier transform which is discrete version of fractional Fourier transform, is used to compress the images with variation of its parameter ‘α’ (order of transform). The compressed image is encrypted using discrete fractional cosine transform to provide security. The advantage of this method is its feasible implementation in practice, superior, robustness, security and sensitivity of keys, which has a good prospect and practicability in information security field. Results of computer simulations are presented to verify the validity of the proposed method such as mean square error (MSE) and peak signal to noise ratio between the original image and decrypted image. Sensitivity for right decryption key is proved with respect to MSE.     

Capacity and optimal power allocation for fading broadcast channels with minimum rates

We derive the capacity region and optimal power allocation scheme for a slowly fading broadcast channel in which minimum rates must be maintained for each user in all fading states, assuming perfect channel state information at the transmitter and at all receivers. We show that the minimum-rate capacity region can be written in terms of the ergodic capacity region of a broadcast channel with an effective noise determined by the minimum rate requirements. This allows us to characterize the optimal power allocation schemes for minimum-rate capacity in terms of the optimal power allocations schemes that maximize ergodic capacity of the broadcast channel with effective noise. Numerical results are provided for different fading broadcast channel models.