提案管理系统的设计与实现

介绍了-个采用PowerBuilder开发的提案管理系统.该系统采用客户端/服务器结构,分为用户管理、提案数据管理、任务数据管理、日志管理四个部分.描述了总体的设计思想、基本功能设计、数据库设计和关键技术.该系统能够帮助用户快速、方便的管理提案数据,在实际中得到了很好的应用.     

Bang-Bang Control Class D Amplifiers: Total Harmonic Distortion and Supply Noise

The total harmonic distortion (THD) and the power supply noise, qualified by the power supply rejection ratio (PSRR) and by the power supply induced intermodulation distortion (PS-IMD), are recognized to be potential drawbacks of class D amplifiers. In this paper, analytical expressions for the THD, PSRR, and PS-IMD of the bang-bang control class D amplifier (bang-bang amp) are derived; the bang-bang amp is arguably the most power-efficient class D amp for low-voltage power-critical applications including hearing aids. Based on the derived expressions, the effects of important parameters on the THD, PSRR, and PS-IMD are investigated, providing good insight to the design of the bang-bang amp to meet given design specifications. The analytical analyses are verified by comparing them against HSPICE simulations and hardware measurements. The bang-bang amp is also compared against the prevalent pulsewidth modulation class D amp, and in most cases, the former is shown to possess superior parameters, including lower power dissipation and hardware advantages for low-voltage power-critical applications.     

Study on antibacterial properties and major bioactive constituents of Chinese water chestnut (Eleocharis dulcis) peels extracts/fractions

Recently, considerable attention has been paid to the biologically active of fruit and vegetable processing wastes. In this study, antibacterial properties and major bioactive constituents of Chinese water chestnut peels (CWCP) extracts and fractions were evaluated. The data displayed that ethyl acetate fractions (EF) from CWCP showed greater antibacterial activity than n-butanol fractions, methanol extracts and water fractions against three common foodborne pathogenic bacteria (Staphylococcus aureus, Escherichia coli and Listeria monocytogenes) assessed by the inhibition zone, minimal inhibition concentration and minimal bactericidal concentration values. In accordance with disc diffusion assay, S. aureus was more susceptible to EF than the other two pathogens. Furthermore, action-mode studies indicated that EF exhibited significant bactericidal activity against S. aureus by degrading and disrupting the cell wall and cytoplasmic membrane, ultimately the leakage of cell contents led to cell death. Finally, high-performance liquid chromatography coupled with photodiode array and electrospray ionization mass spectrometry was used for characterization of bioactive constituents in EF, and ten flavonoids aglycons were identified or tentatively identified. The results suggest that the extracts and fractions from CWCP could be potentially used as a possible food supplement to improve food safety by the control or elimination of foodborne pathogenic bacteria.     

Screening of <Emphasis Type="Italic">Candida utilis</Emphasis> and medium optimization for co-production of <Emphasis Type="Italic">S</Emphasis>-adenosylmethionine and glutathione

An effective S-adenosylmethionine and glutathione enriching yeast mutant of Candida utilis CCTCC M 209298 was first screened from plates containing 0.5 g/L of DL-ethionine by complex mutagenesis with UV and γ-ray in this study. Medium components optimization for enhanced co-production of S-adenosylmethionine and glutathione by C. utilis CCTCC M 209298 was further carried out using response surface methodology. The significant factors influencing S-adenosylmethionine and glutathione co-production were selected by Plackett-Burman design as sucrose, KH₂PO₄ and L-methionine, and Box-Behnken design was applied for further optimization studies. Based on these approaches, the optimized concentrations on medium components for higher co-production of S-adenosylmethionine and glutathione were sucrose 35.4 g/L, (NH₄)₂SO₄ 10 g/L, KH₂PO₄ 12.3 g/L, MgSO₄·7H₂O, 0.05 g/L, CaCl₂ 0.05 g/L and L-methionine 4.6 g/L. The medium optimization by response surface methodology led to a total production of 589.3 mg/L on S-adenosylmethionine and glutathione, which was 2.4-fold increased compared with the medium without optimization.     

Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD

Surface texturing has been recognized to be very efficient in modifying the tribological performances of sliding surfaces. In the present article, a three-dimensional hydrodynamic lubrication model of the incompressible Newtonian fluid is proposed on the textured surface with a single spherical cap microdimple based on the full Navier-Stokes equation. The three-dimensional pressure field and velocity field of lubrication film are obtained by employing the finite volume method (FVM). The effects of geometric parameters and Reynolds number on pressure field, load-carrying capacity, friction force, and friction coefficient are investigated. Numerical simulation led the authors to conclude that the load-carrying capacity of the lubrication film is monotonously enhanced with increasing microdimple width and Reynolds number, and a reverse tendency is obtained for friction force and friction coefficient. The dimensionless optimum microdimple depth increases with the increase of the width and decreases with the increase of the Reynolds in the range of 0.80–2.00, which is responsible for the largest load-carrying capacity and the smallest friction coefficient. It has also been found that the optimum depth becomes a critical value to produce a vortex in the bottom of the dimple. Further analysis indicates that the optimum dimple depth becomes a transition of lubrication mode from hydrodynamic to mixed lubrication for a textured surface with a fixed microdimple.     

Pressure Effect on Superconductivity and Magnetism in α-FeSe x

In this paper, the pressure effect on superconductivity and magnetism has been investigated in FeSe _x (x=0.80,0.88). The magnetization curves display anomaly at T _s1∼106 K and T _s2∼78 K except for the superconducting diamagnetic transition around T _c ∼8 K. The magnetic anomaly at T _s1 and T _s2 can be related to a ferromagnetic and an antiferromagnetic phase transition, respectively, as revealed by specific heat measurements. The application of pressure not only raises T _c , but also increases both T _s1 and T _s2.      

428XL仪器采集链的使用、维护和现场简易维修

428XL仪器在可靠性、可操作性以及传输速度都得以提升的同时,其采集链由几段独立的电缆整合为一条整链,在野外检修采集链时,可能因为没有专用检测设备而无法按检修手册进行维修。本文讨论了WPSR和ST两种常用采集链在野外使用时,根据不同的地表条件有针对性采取的不同保护措施;并提出了适合于野外条件下进行采集链简易、快速维修的方法。     

对高师钢琴教学改革的思考

根据高等师范院校与艺术院校的钢琴教学在培养目标上的差异,分析了高等师范院校钢琴课教学存在的问题,探讨了高师钢琴课教学内容、教学方法和考核内容及形式的改革.     

Robust facial feature points extraction in color images

A method of facial feature points extraction based on improved active appearance model (AAM) with Gabor wavelet features was presented in the paper. After the pre-processing of a standard face detector and lighting compensation, the paper proposed a hybrid AAM by combining the local skin similarity with the original local grey-level appearance model. Moreover, the feature points by the hybrid AAM and their neighbors were considered by a classification problem to further refine the results. Namely, the Gabor feature around the feature points was extracted, trained by linear discriminant analysis (LDA) and classified by K Nearest Neighbor (KNN) to give the precise location of the feature points. Experimental results indicated that facial feature points can be located robustly and precisely by the proposed method.