Tracking trajectories of the cart-pendulum system

The problem of tracking a periodic trajectory of the well-known cart-pendulum system is solved. After a change of coordinates and a change of feedback, the equations of this system are nonlinear but feedforward. This property is extensively used to carry out for this system the design of uniformly asymptotically stabilizing time-varying state feedbacks by using the forwarding approach.     

Visual C++与Fortran混合编程及Matcom绘图在空调负荷计算软件中的应用

介绍利用VC与Fortran进行混合编程，将Visual C 程疗从DOS环境下移植到期Windows环境下，并利用Matcom对数据进行可视化的方法。     

软土地基地下结构的一个CAD软件

本文介绍地下结构计算机辅助设计软件——UCAD的总体结构、主要功能以及解决的问题。     

Effects of interstitial oxygen on microstructure and mechanical properties of Ti-48Al-2Cr-2Nb with fully lamellar and duplex microstructures

The effect of added oxygen in the range of 1000 to 4000 wt ppm on the microstructures of a Ti-48Al-2Cr-2Nb alloy has been investigated and compared to the microstructures for a high-purity alloy. For specimens cooled from theα phase, interstitial oxygen stabilizes the lamellar microstructure with respect toγ grains, with higher than equilibrium values for theα ₂ volume fraction. For specimens cooled from theα +γ phase field, the lamellar microstructure still tends to be favored by oxygen, but it is found that the phase volume fractions are not significantly different from equilibrium values. This suggests that interstitial O essentially reduces the kinetics of theα toα +γ transformation. Thus, interstitial oxygen will have a strong effect on microstructures obtained by continuous cooling fromα, but significantly less on those, such as the duplex microstructure, obtained by long treatment in theα +γ phase field. In general, increased O content is well correlated with reduced ductility. Finally, the role of interstitial oxygen on this phase transformation is discussed.     

过渡金属对Au-Pd/TiO_2-Al_2O_3催化剂加氢脱硫性能的影响

研究了掺杂过渡金属Ru,Ni,Co对Au-Pd/TiO2-Al2O3催化剂催化噻吩加氢脱硫活性的影响,并采用X射线衍射、电感耦合等离子发射光谱、程序升温还原和程序升温脱附等方法对TiO2-Al2O3复合载体、Au-Pd/TiO2-Al2O3和Au-Pd-TM/TiO2-Al2O3(TM表示过渡金属)催化剂进行了表征。实验结果表明,掺杂过渡金属未改变Au-Pd/TiO2-Al2O3催化剂的结构;掺杂Ru或Ni增强了Au-Pd/TiO2-Al2O3催化剂的活性组分与TiO2-Al2O3复合载体的相互作用,降低了反应活化能,提高了催化剂活性组分的分散度和活性比表面积,改善了Au-Pd/TiO2-Al2O催化剂的吸附性能,从而提高了Au-Pd/TiO2-Al2O3催化剂催化噻吩加氢脱硫的活性;而掺杂Co的效果则与之相反。     

机载雷达成像中的两种改进多普勒质心估计算法

多普勒质心估计是机载脉冲多普勒雷达DBS成像技术中最为关键的步骤之一.本文针对载机惯导参数误差较大的实际情况,提出了改进的频域和时域多普勒质心估计算法.新的算法克服了传统算法受地面场景非均匀性和回波信号起伏的影响,大大提高了估计的精度.最后将这些算法用于某型脉冲多普勒雷达的实测数据,成像结果证明了算法的有效性.     

催化主风机故障分析与处理

主风机发生喘振后流量减小并且振动增大,抢修后振动未消除反而增加,且有上升趋势.运用状态监测方法对其测试分析,查出振源为动不平衡和对中不良.为使机组能继续安全运行,采取了加强监测,降低轴系负荷和降低润滑油油温等措施,故障消除.     

CARS光谱测温及仪器狭缝函数对测量的影响

设计了一种利用光参量振荡器(OPO)来代替染料激光器的宽带相干反斯托克斯喇曼散射(CARS)光谱测温实验装置。为了提高CARS测量温度的精度,测量和分析了检测系统中狭缝函数对测量结果的影响,确定了狭缝函数的具体形式。将测量结果与热电偶读数比较,发现在温度范围300K～1200K内,温度测量的不确定度小于2%。