Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Detection of hepatitis G virus from serum and liver of a patient with long-term liver dysfunction after autologous bone marrow transplantation

Long-term effects after blood or bone marrow transplantation (BMT) are emerging as an important issue, as more patients are included in BMT programmes and as this procedure becomes more successful. Long-term liver dysfunction, mainly due to chronic graft-versus-host disease or hepatitis C virus infection, is a well-known complication. Nevertheless, the diagnosis of liver disease in this patient group is sometimes difficult and, despite adequate studies, it may remain undetected. A novel hepatitis-associated virus, hepatitis G virus (HGV), has recently been identified. The virus belongs to the Flaviviridae family and is known to be parenterally transmitted, although there is no clear evidence to implicate this agent in causing acute or chronic hepatitis. We report a patient who developed mild, but persistent, abnormalities in transaminases for 2 years after an autologous BMT. HGV RNA was detected in both serum and liver. HGV RNA persisted in serum for at least 8 months. No other known hepatitis virus was found. This report provides the first direct evidence of a patient with long-term liver abnormalities after a BMT in whom the only known hepatitis virus isolated was the HGV.     

Opinions regarding the importance of body image disorders in the development and in the course of eating disorders

The article presents a review of most important research results as well as opinions about the role and importance of body image disturbances in the development and the course of eating disorders. It also contains a review of definitions of body image, and techniques used in the evaluation of this type of disorders.     

Effects of storage time and chemical preservatives on the total volatile basic nitrogen content in chilean mackerel (Trachurus murphy) prior to fish meal production

Total volatile basic nitrogen (TVB-N) as a measure of protein degradation and total microbial counts or stored raw mackerel (Trachurus murphy), which had been treated with chemical preservatives, were compared with the TVB-N and microbial counts of untreated fish. In unpreserved fish, decomposition of fish protein was rapid. Treatment of mackerel with acetic (1000-5000 μg kg^?1), which was the most effective of the parameters studied, approximately halved the rate of increase in TVB-N compared with the untreated samples. Changes in the total microbial counts presented a similar trend.     

MODELISATION PRINCIPLES FOR DRYING OF GELS

When one wants to understand and model the drying of high water content gels, one needs to gather all thermal physical parameters and to derive a physical model based on independently measured parameters. We chose to work experimentally and theoretically on water diffusion and drying of spheres of polyacrylamide gel.

We have demonstrated the strong influence of vitreous transition on the relationship of water diffusivity with moisture content. Values of the diffusion coefficient and temperature shift factor for diffusion have been proposed.

Convective and micro-wave drying kinetics show the presence of a drying phase purely specific to radiation absorption. Finally, we have proposed a mathematical model containing independent physical parameters, which' not only predicts mass fluxes but also analyses critical physical phenomena.     

L'impact des sympt?mes somatiques dans l'évaluation de la dépression chez une population gériatrique.

Studied the relationship among age, physical health status, and psychic and somatic symptoms of depression among elderly adults. Human Ss: 318 male and female Canadian older adults (aged 65–102 yrs). Information on sociodemographic factors and health status was obtained using the Older American Research Scale, French version, by R. Lefran?ois et al (1988). A French version by P. Bourque and D. Beaudette (1982) of the Beck Depression Inventory was also used. The results were evaluated according to each S's sex, age, institutionalized residence status, and health status. Statistical tests were used. (English abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A finite element analysis of damage propagation during metal forming process

In this paper damage propagation during metal forming process is investigated with the concept of continuum damage mechanics. An isotropic damage model based on the theory of materials of type N is adopted to describe the damage process of a ductile material with large elasto-viscoplastic deformation. To solve the finite elasto-viscoplasticity problem, a reasonable kinematic strain measure for largely deformed solids is used and the damage constitutive equations based on thermodynamical framework are developed. The stiffness degradation of the loaded material is chosen as a damage measure. An extended interior penalty method is used to impose the contact condition on the boundary. The highly nonlinear equilibrium equations are reduced to the incremental weak form and approximated by the total Lagrangian finite element method. The displacement control method along with the modified Riks' continuation technique based on displacement parameter is used to solve the incremental iterative equations. As numerical examples, upsetting, backward extrusion and punch problems are simulated and the results of damage propagation and J₂ stress contours with and without damage are presented. For punch problems, spring back and residual stresses are also presented.     

Properties of paper coated with kaolin: The influence of the rheological modifier

The first part of this paper analyses the influence of the molecular weight and concentration of carboxymethyl cellulose (CMC) and of kaolin concentration on rheology of the coating colours and on paper properties coated with ultra lightweight coatings (ULWC). In the second part, relationships between the rheological characteristics of the coating colour formulations and coated paper surface quality was also studied.New indexes on paper roughness at micro-scale are presented (RZI and SRI). In general, they show good correlation with sheet gloss. A new gloss index (SGI) is presented, accounting for the contribution of gloss from machine direction (MD) and cross direction (CD). Porosimetry was used to access microstructural characteristics in order to correlate them with light scattering and gloss properties. The former property is closely related to Hg intrusion volume of the coated layer while gloss is related to surface porosity with pore diameters in the range of 7–15 μm as measured by Hg intrusion volume.