Filler Wetting in Miscible ESBR/SSBR Blends and Its Effect on Mechanical Properties

The selective wetting behavior of silica in emulsion styrene butadiene rubber (ESBR)/solution styrene butadiene rubber (SSBR) blends is characterized by the wetting concept, which is further developed for filled blends based on miscible rubbers. It is found that not only the chemical rubber–filler affinity but also the topology of the filler surface significantly influences the selective filler wetting in rubber blends. The nanopore structure of the silica surface has been recognized as the main reason for the difference in the wetting behavior of the branched ESBR molecules and linear SSBR molecules. However, the effect of nanopore structure becomes more significant in the presence of silane. It is discussed that the adsorption of silane on silica surface constricts the nanopore to some extent that hinders effectively the space filling of the nanopores by the branched ESBR molecules but not by the linear SSBR molecules. As a result, in silanized ESBR/SSBR blends the dominant wetting of silica surface by the tightly bonded layer of SSBR molecules causes a low‐energy dissipation in the rubber–filler interphase. That imparts the low rolling resistance to the blends similar to that of a silica‐filled SSBR compound, while the ESBR‐rich matrix warrants the good tensile behavior, i.e., good abrasion and wear resistance of the blends.

     

Energetics and Structure of Polymer‐Derived Si–(B–)O–C Glasses: Effect of the Boron Content and Pyrolysis Temperature

The structure and properties of polymer‐derived Si–(B–)O–C glasses have been shown to be significantly influenced by the boron content and pyrolysis temperature. This work determined the impact of these two parameters on the thermodynamic stability of these glasses. High‐temperature oxide melt solution calorimetry was performed on a series of amorphous samples, with varying boron contents (0–7.7 at.%), obtained by pyrolysis of precursors made by a sol–gel technique. Thermodynamic analysis of the calorimetric results demonstrated that at a constant pyrolysis temperature, adding boron makes the materials energetically less stable. While the B‐containing glasses pyrolyzed at 1000°C were energetically less stable than the competitive crystalline components, increasing the pyrolysis temperature to 1200°C led to their enthalpic stability. ²⁹Si and ¹¹B MAS nuclear magnetic resonance (NMR) spectroscopy measurements on selected samples confirmed a decrease in the concentrations of mixed Si‐centered SO_iC_4?i and B‐centered BO_jC_3?j bonds at the expense of formation of SiO₄ and B(OSi)₃ species (indicating a tendency toward phase separation) when the boron content and pyrolysis temperature increased. In light of the findings from calorimetry and NMR spectroscopy, we propose a structure–energetic relationship in Si–(B–)O–C glasses.     

The formation and breakup of molten oxide jets under periodic excitation

The experiments on the capillary breakup of slag jets at high temperatures are presented in this article. The impact of external excitations on the disintegration process was investigated in a furnace with optical access filmed at frame rates up to 10,000 fps. A synthetic calcia‐alumina slag was used to form jets at different temperatures (1570–1660°C) and jet velocities (0.6–1.4 ms^?1). The impact of external vibration on the breakup was evident: for low jet velocities, the jet length decreased, the droplet size increased, satellite droplet formation was hindered, and a distinct “pumping mechanism” was observed. For jets with higher velocity, the jet length decreased by 30%, the droplet generation frequency increased from 20 to 250 droplets per second, the drop sizes were uniform, and satellite formation was also suppressed. In this case, the ideal case in which the volume of one wave instability forms one droplet was achieved. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3350–3361, 2014     

An Oral Male Courtship Pheromone Terminates the Response of Nasonia vitripennis Females to the Male-Produced Sex Attractant

Sex pheromones are crucial for mate finding in many animals. Long-range attraction, mate recognition, and the elicitation of sexual receptiveness during courtship are typically mediated by different compounds. It is widely unknown, however, how the different components of a species’ pheromone system influence each other. Here, we demonstrated in the parasitoid wasp Nasonia vitripennis that females quickly cease to respond to the male sex attractant after they contact a male’s oral secretion during courtship. We used this behavioral switch to monitor the fractionation of head extracts from male wasps for identification of the bioactive compounds as a blend of ethyl oleate, ethyl linoleate, and ethyl α-linolenate. This is the first identification of a cephalic courtship pheromone in parasitic Hymenoptera. Plasticity in pheromone-mediated sexual behavior of female insects has hitherto been attributed to the transfer of bioactive proteinaceous molecules with the male ejaculate. The pheromone interaction reported here sheds new light on the sexual communication of insects by showing that the sex pheromone response of females can be terminated by males independent of sperm transfer.     

High Chemical Diversity in a Wasp Pheromone: a Blend of Methyl 6-Methylsalicylate,Fatty Alcohol Acetates and Cuticular Hydrocarbons Releases Courtship Behavior in the Drosophila Parasitoid Asobara tabida

Wasps of genus Asobara, a larval parasitoid of Drosophila, have become model organisms for the study of host-parasite interactions. However, little is known about the role of pheromones in locating mates and courtship behavior in this genus. In the present study, we aimed to identify the female courtship pheromone in Asobara tabida. The chemical compositions of solvent extracts from male and female wasps were analyzed by GC/MS. These extracts, fractions thereof, and synthetic pheromone candidates were tested for their activity in behavioral bioassays. The results demonstrate that the courtship pheromone of A. tabida is characterized by a remarkable chemical diversity. A multi-component blend of female-specific compounds including methyl 6-methylsalicylate (M6M), fatty alcohol acetates (FAAs), and cuticular hydrocarbons (CHCs) released male courtship behavior. Using a combinatory approach that included both purified natural products and synthetic analogs, it was shown that none of the three chemical classes alone was sufficient to release a full behavioral response in males. However, a blend of M6M and FAAs or combinations of one or both of these with female-derived CHCs resulted in wing-fanning responses by males comparable to those elicited by the crude extract of females. Thus, components from all three chemical classes contribute to the bioactivity of the pheromone, but none of the elements plays a key role or is irreplaceable. The fact that one of the FAAs, vaccenyl acetate, is also used as a kairomone by Asobara females to locate Drosophila hosts suggests that a pre-existing sensory responsiveness to vaccenyl acetate might have been involved in the evolution of the female sex pheromone in Asobara.     

Covalently Immobilized Regenerable Immunoaffinity Layer with Orientation-Controlled Antibodies Based on Z-Domain Autodisplay

A regenerable immunoaffinity layer comprising covalently immobilized orientation-controlled antibodies was developed for use in a surface plasmon resonance (SPR) biosensor. For antibody orientation control, antibody-binding Z-domain-autodisplaying Escherichia coli (E. coli) cells and their outer membrane (OM) were utilized, and a disuccinimidyl crosslinker was employed for covalent antibody binding. To fabricate the regenerable immunoaffinity layer, capture antibodies were bound to autodisplayed Z-domains, and then treated with the crosslinker for chemical fixation to the Z-domains. Various crosslinkers, namely disuccinimidyl glutarate (DSG), disuccinimidyl suberate (DSS) and poly (ethylene glycol)-ylated bis (sulfosuccinimidyl)suberate (BS(PEG)₅), were evaluated, and DSS at a concentration of 500 μM was confirmed to be optimal. The E. coli-cell-based regenerable HRP immunoassay was evaluated employing three sequential HRP treatment and regeneration steps. Then, the Oms of E. coli cells were isolated and layered on a microplate and regenerable OM-based HRP immunoassaying was evaluated. Five HRP immunoassays with four regeneration steps were found to be feasible. This regenerable, covalently immobilized, orientation-controlled OM-based immunoaffinity layer was applied to an SPR biosensor, which was capable of quantifying C-reactive protein (CRP). Five regeneration cycles were repeated using the demonstrated immunoaffinity layer with a signal difference of <10%.     

Pre-adolescent children exhibit lower aerosol particle volume emissions than adults for breathing,speaking, singing and shouting

Speaking and singing are activities linked to increased aerosol particle emissions from the respiratory system, dependent on the utilized vocal intensity. As a result, these activities have experienced considerable restrictions in enclosed spaces since the onset of the COVID-19 pandemic due to the risk of infection from the SARS-CoV-2 virus, transmitted by virus-carrying aerosols. These constraints have affected public education and extracurricular activities for children as well, from in-person music instruction to children’s choirs. However, existing risk assessments for children have been based on emission measurements of adults. To address this, we measured the particle emission rates of 15 pre-adolescent children, all eight to ten years old, with a laser particle counter for the test conditions: breathing at rest, speaking, singing and shouting. Compared with values taken from 15 adults, emission rates for breathing, speaking and singing were significantly lower for children. Particle emission rates were reduced by a factor of 4.3 across all conditions, whereas emitted particle volume rates were reduced by a factor of 4.8. These data can supplement SARS-CoV-2 risk management scenarios for various school and extracurricular settings.     

圆筒织物的连续脱水开布

详细描述了Suvac Cut脱水开幅机.与离心脱水开幅机相比,叙述了这一连续工艺的优点.利用真空脱水技术,阔幅圆筒织物可在连续工艺中脱水和开幅,     

Synthesis and SAR of Tetracyclic Inhibitors of Protein Kinase CK2 Derived from Furocarbazole W16

The serine/threonine kinase CK2 modulates the activity of more than 300 proteins and thus plays a crucial role in various physiological and pathophysiological processes including neurodegenerative disorders of the central nervous system and cancer. The enzymatic activity of CK2 is controlled by the equilibrium between the heterotetrameric holoenzyme CK2α₂β₂ and its monomeric subunits CK2α and CK2β. A series of analogues of W16 ((3aR,4S,10S,10aS)-4-{[(S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl]carbonyl}-10-(3,4,5-trimethoxyphenyl)-4,5,10,10a-tetrahydrofuro[3,4-b]carbazole-1,3(3aH)-dione ((+)- 3 a )) was prepared in an one-pot, three-component Levy reaction. The stereochemistry of the tetracyclic compounds was analyzed. Additionally, the chemically labile anhydride structure of the furocarbazoles 3 was replaced by a more stable imide ( 9 ) and N-methylimide ( 10 ) substructure. The enantiomer (−)- 3 a (K_i=4.9 μM) of the lead compound (+)- 3 a (K_i=31 μM) showed a more than sixfold increased inhibition of the CK2α/CK2β interaction (protein-protein interaction inhibition, PPII) in a microscale thermophoresis (MST) assay. However, (−)- 3 a did not show an increased enzyme inhibition of the CK2α₂β₂ holoenzyme, the CK2α subunit or the mutated CK2α′ ^C336S subunit in the capillary electrophoresis assay. In the pyrrolocarbazole series, the imide (−)- 9 a (K_i=3.6 μM) and the N-methylimide (+)- 10 a (K_i=2.8 μM) represent the most promising inhibitors of the CK2α/CK2β interaction. However, neither compound could inhibit enzymatic activity. Unexpectedly, the racemic tetracyclic pyrrolocarbazole (±)- 12 , with a carboxy moiety in the 4-position, displays the highest CK2α/CK2β interaction inhibition (K_i=1.8 μM) of this series of compounds.