Stress and strain distribution in demineralized enamel: A micro‐CT based finite element study

Physiological oral mechanical forces may play a role on the progression of enamel carious lesions to cavitation. Thus, the aim of this study was to describe, by 3D finite element analysis, stress, and strain patterns in sound and carious enamel after a simulated occlusal load. Micro‐CT based models were created and meshed with tetrahedral elements (based on an extracted third molar), namely: a sound (ST) and a carious tooth (CT). For the CT, enamel material properties were assigned according to the micro‐CT gray values. Below the threshold corresponding to the enamel lesion (2.5 g/cm³) lower and isotropic elastic modulus was assigned (E = 18 GPa against E₁ = 80 GPa, E₂ = E₃ = 20 GPa for sound enamel). Both models were imported into a FE solver where boundary conditions were assigned and a pressure load (500 MPa) was applied at the occlusal surface. A linear static analysis was performed, considering anisotropy in sound enamel. ST showed a more efficient transfer of maximum principal stress from enamel to the dentin layer, while for the CT, enamel layer was subjected to higher and concentrated loads. Maximum principal strain distributions were seen at the carious enamel surface, especially at the central fossa, correlating to the enamel cavity seen at the original micro‐CT model. It is possible to conclude that demineralized enamel compromises appropriate stress transfer from enamel to dentin, contributing to the odds of fracture and cavitation. Enamel fracture over a dentin lesion may happen as one of the normal pathways to caries progression and may act as a confounding factor during clinical diagnostic decisions. Microsc. Res. Tech. 78:865–872, 2015. © 2015 Wiley Periodicals, Inc.     

Polymerisation of styrene using Y, USY and β zeolites as catalysts

The homopolymerisation of styrene is studied in the presence of Y, USY and beta zeolites. High molecular weight polymers, in the range 0.7 × 10⁶–1 × 10⁶, are obtained in good yields. The activity of zeolite beta is only slightly increased by calcination of the as-synthesised material, pointing to an important role of the zeolite outer surface. The influence of the catalyst acidity upon the polymer molecular weight is evaluated by the use of dealuminated zeolites. This revised version was published online in July 2006 with corrections to the Cover Date.     

A Survey of Institutional Investors' Attitudes and Perceptions of Residential Property: The Swiss,Dutch and Swedish Cases

This paper provides evidence about institutional investors' attitudes and perceptions of residential property as an investment asset group in three European countries (Switzerland, the Netherlands and Sweden). These countries stand out, with an extraordinarily large institutional residential ownership, in fact, residential institutional allocation represents about 6 per cent, 2 per cent and 3 per cent of the total institutional investment in Switzerland, the Netherlands and Sweden, respectively. Housing is the most important institutional property asset type in Switzerland and the Netherlands, comprising over 52 per cent and 50 per cent of their institutional property portfolios, respectively. In Sweden residential property plays an important, but not dominant role in the domestic institutional property portfolios, representing about 21 per cent of the institutional property holdings. Using a postal survey of representatives of pension funds, insurance companies, property investment and asset management companies the study analyses the attractiveness of residential property in terms of institutional investment goals. The survey examines the institutional investors' perceptions of housing investment, namely with respect to its returns, volatility, inflation hedging, liabilities matching and correlation with shares, bonds and non-residential property. Additionally, the survey looks at the institutional investors' experiences regarding the private rented sector. The survey suggests that investment in residential property equity is likely to be done through larger portfolios, which tend to invest in housing directly. Residential property is seen mainly as an earning asset group able to provide diversification benefits for investors even when portfolios already include non-residential property. The respondents are mainly concerned with rent regulation issues, the lack of well-structured investment vehicles is undoubtedly a less important problem.     

Automatic control systems for submerged membrane bioreactors: a state-of-the-art review

Membrane bioreactor (MBR) technology has become relatively widespread as an advanced treatment for both industrial and municipal wastewater, especially in areas prone to water scarcity. Although operational cost is a key issue in MBRs, currently only a few crucial papers and inventions aimed to optimise and enhance MBR efficiency have been published. The present review summarises the available solutions in the area of automatic control systems and widely explores the advances in automation and control for MBRs. In this review of state of the art, different control systems are evaluated comparatively, distinguishing between control systems used for the filtration process and those used for the biological process of MBRs and describing the challenge faced by integrated control systems. The existing knowledge is classified according to the manipulated variables, the operational mode (open-loop or closed-loop) and the controlled variables used.     

Functionalization of polydimethylsiloxane membranes to be used in the production of voice prostheses

Abstract

The voice is produced by the vibration of vocal cords which are located in the larynx. Therefore, one of the major consequences for patients subjected to laryngectomy is losing their voice. In these cases, a synthetic one-way valve set (voice prosthesis) can be implanted in order to allow restoration of speech. Most voice prostheses are produced with silicone-based materials such as polydimethylsiloxane (PDMS). This material has excellent properties, such as optical transparency, chemical and biological inertness, non-toxicity, permeability to gases and excellent mechanical resistance that are fundamental for its application in the biomedical field. However, PDMS is very hydrophobic and this property causes protein adsorption which is followed by microbial adhesion and biofilm formation. To overcome these problems, surface modification of materials has been proposed in this study. A commercial silicone elastomer, Sylgard^TM 184 was used to prepare membranes whose surface was modified by grafting 2-hydroxyethylmethacrylate and methacrylic acid by low-pressure plasma treatment. The hydrophilicity, hydrophobic recovery and surface energy of the produced materials were determined. Furthermore, the cytotoxicity and antibacterial activity of the materials were also assessed. The results obtained revealed that the PDMS surface modification performed did not affect the material's biocompatibility, but decreased their hydrophobic character and bacterial adhesion and growth on its surface.     

Application of multivariate curve resolution to the analysis of yeast genome-wide screens

In this work, the application of Multivariate Curve Resolution to the analysis of yeast genome-wide screens obtained by means of DNA microarray technology is shown. In order to perform the analysis of this type of data, two algorithms based on Alternating Least Squares (MCR-ALS) and on its maximum likelihood weighted projection (MCR-WALS) variant are compared. The utilization of the modified weighted alternating least (WALS) squares algorithm is motivated by the rather poor quality, uncertainties and experimental noise associated to DNA microarray data. Moreover, a large number of missing values are usually present in these data sets and the weighted WALS approach allowed circumventing this problem. Two different experimental datasets were used for this comparison. In the first dataset, gene expression values in budding yeast were monitored in-response to glucose limitation. In the second dataset, the changes in the gene expression caused by the daunorubicin drug were monitored as a function of time. Results obtained by application of Multivariate Curve Resolution in the two cases allowed a good recovery of the evolving gene expression profiles and the identification of metabolic pathways and individual genes involved in these gene expression changes.     

Economic design of water distribution systems in buildings

This article discusses an engineering optimization problem which arises in hydraulics and is related to the use of a new criterion for sizing water distribution piping in large buildings. The optimization model aims to find the most suitable interior pipe diameters for the various pipes in the system, using commercial sizes and minimizing the overall installation cost according to some boundary conditions. The problem is formulated as a non-convex nonlinear program and a branch-and-bound algorithm is introduced for its solution. A procedure is proposed to obtain a feasible solution with standard values from the optimal solution of the non-convex program. The performance of the algorithm is analysed for a real-life problem and the cost of the computed solution is assessed, showing the appropriateness of the model and the optimization techniques.     

Secondary crystalline phases identification in Cu_2ZnSnSe_4 thin films: contributions from Raman scattering and photoluminescence

In this work, we present the Raman peak positions of the quaternary pure selenide compound Cu \(_2\) ZnSnSe \(_4\) (CZTSe) and related secondary phases that were grown and studied under the same conditions. A vast discussion about the position of the X-ray diffraction (XRD) reflections of these compounds is presented. It is known that by using XRD only, CZTSe can be identified but nothing can be said about the presence of some secondary phases. Thin films of CZTSe, Cu \(_2\) SnSe \(_3\) , ZnSe, SnSe, SnSe \(_2\) , MoSe \(_2\) and a-Se were grown, which allowed their investigation by Raman spectroscopy (RS). Here we present all the Raman spectra of these phases and discuss the similarities with the spectra of CZTSe. The effective analysis depth for the common back-scattering geometry commonly used in RS measurements, as well as the laser penetration depth for photoluminescence (PL) were estimated for different wavelength values. The observed asymmetric PL band on a CZTSe film is compatible with the presence of CZTSe single-phase and is discussed in the scope of the fluctuating potentials' model. The estimated bandgap energy is close to the values obtained from absorption measurements. In general, the phase identification of CZTSe benefits from the contributions of RS and PL along with the XRD discussion.