Radar‐based structural health monitoring of wind turbine blades: The case of damage localization

This short communication reports on a radar approach for structural health monitoring of wind turbine blades. Therefore, a bistatic frequency‐modulated continuous wave (FMCW) radar in the frequency range from 33.4 to 36.0 GHz has been developed and tested experimentally using a laboratory wind turbine demonstrator. A differential damage localization framework is presented here that exploits signal differences between measurements from the intact and the damaged structure for 3D imaging of the defect. We have achieved the localization of a 30‐mm cut in a glass fiber composite structure as well as the localization of a water pack at the backside of the specimen with a localization error of several centimeters.     

Experiments and Simulations on the Cleaning of a Swellable Soil in Plane Channel Flow

ABSTRACT

The cleaning behavior of a soil with physical properties that depend on the wetting time is studied experimentally via the local phosphorescence detection method and simulated numerically in fully developed plane channel flow for Reynolds numbers up to 30,000. A computationally inexpensive general cleaning model is proposed, adopting an existing removal model and coupling it to the turbulent flow field. The influence of the soil on the flow is neglected and the transient behavior of the soil during cleaning is modeled in the form of a transient Dirichlet boundary condition. This approach is innovative for computational fluid dynamics of this phenomenon. The way of determining the model parameters from the experiment is described. The comparison of the simulation results with experimental data reveals very good suitability of the model in the case of a starch soil. A similar good agreement is found for data for a model protein foulant in tube flow from the literature.     

Reduction of a detailed reaction mechanism for hydrogen combustion under gas turbine conditions

The aim of this study is to find a reduced mechanism that accurately represents chemical kinetics for lean hydrogen combustion at elevated pressures, as present in a typical gas turbine combustor. Calculations of autoignition, extinction, and laminar premixed flames are used to identify the most relevant species and reactions and to compare the results of several reduced mechanisms with those of a detailed reaction mechanism. The investigations show that the species OH and H are generally the radicals with the highest concentrations, followed by the O radical. However, the accumulation of the radical pool in autoignition is dominated by HO₂ for temperatures above, and by H₂O₂ below the crossover temperature. The influence of H₂O₂ reactions is negligible for laminar flames and extinction, but becomes significant for autoignition. At least 11 elementary reactions are necessary for a satisfactory prediction of the processes of ignition, extinction, and laminar flame propagation under gas turbine conditions. A 4-step reduced mechanism using steady-state approximations for HO₂ and H₂O₂ yields good results for laminar flame speed and extinction limits, but fails to predict ignition delay at low temperatures. A further reduction to three steps using a steady-state approximation for O leads to significant errors in the prediction of the laminar flame speed and extinction limit.     

释放阳光地带的光伏发电潜力

拥有非常丰富的太阳能辐射资源的阳光地带,人口占全球人口总数的75%,电力需求占全球总需求的40%,该地区经济发展受到能源和环境的制约,充分利用丰富的太阳能辐射资源开发光伏发电产业,是可持续发展的重要手段。预测结果表明,范式转型情景中,这些国家的光伏装机容量甚至可达1 100 GW,也就是该地域发电总量的12%;2020年阳光地带国家光伏系统的发电成本将比建设天然气和燃油电站更具竞争力;至2030年光伏发电可以与所有以煤和天然气为燃料的中负荷电厂竞争。阳光地带国家发展股份发电目前还面临着许多障碍,这些障碍涉及到政府对燃油价格的补贴、服务于市场的能力以及能源公司的知识有限等,这些障碍有待于在发展过程中不断克服。中国和印度是阳光地带中的大国,两国的光伏制造业对阳光地带的影响很大。新能源被锁定为中国十二五规划的七大战略性新兴产业之一,中国的十二.五规划的重心是重新平衡经济增长模式,包括逐步扩大内需;国内光伏市场一旦打开,光伏在中国的发展将会非常迅速。释放阳光地带光伏潜力要求众多利益相关者共同参与协作,包括政府、银行和金融机构以及各行各业的支持,才能充分释放阳光地带的光伏发电潜力,带动光伏发电产业链的发展,成为社会经济...     

Effect of oxygen addition on the water–gas shift reaction over Pt/CeO2 catalysts in microchannels – Results from catalyst testing and reactor performance in the kW scale

Wash-coated Pt/CeO₂, Pt/CeO₂/ZrO₂ and Pt/Cu/CeO₂ and Pt/CeO₂/Al₂O₃ based formulations were tested in sandwich type microreactors for water–gas shift (WGS) activity. At low reaction temperature of 260 °C, low conversion of carbon monoxide was initially observed which increased considerably upon the addition of air, a behaviour which was observed even after multiple cycles of start-up, operation with and without air and shut-down. At a higher reaction temperature of 400 °C air addition did not further improve the performance of the catalysts, which converted the carbon monoxide already close to equilibrium. One of the catalysts was incorporated into a larger reactor of kW scale and tested for its performance under conditions of WGS and oxygen enhanced WGS. The carbon monoxide conversion was increased by the air addition also on the larger reactor.     

The offshore trend: Structural changes in the wind power sector

In recent years, the wind power sector has begun to move offshore, i.e. to use space and good wind speeds on the open sea for large scale electricity generation. Offshore wind power, however, is not just technologically challenging but also a capital intensive and risky business that requires particular financial and organizational resources not all potential investors might have. We therefore address the question, what impact offshore wind power may have on ownership and organizational structures in the wind power sector. We compare on- and offshore wind park ownership in Denmark, the UK and Germany. The analysis shows that offshore wind power in all three countries is dominated by large firms, many of which are from the electricity sector. In Denmark and the UK, also investors from the gas and oil industry play an important role in the offshore wind business. This development represents a major shift for countries such as Germany and Denmark, in which the wind power sector has grown and matured on the basis of investments by individuals, farmers, cooperatives and independent project developers. The structural changes by which offshore wind power is accompanied have consequences for turbine manufacturers, project developers, investors, associations and policy makers in the field.     

Industrial energy efficiency and climate change mitigation

Industry contributes directly and indirectly (through consumed electricity) about 37% of the global greenhouse gas emissions, of which over 80% is from energy use. Total energy-related emissions, which were 9.9 GtCO₂ in 2004, have grown by 65% since 1971. Even so, industry has almost continuously improved its energy efficiency over the past decades. In the near future, energy efficiency is potentially the most important and cost-effective means for mitigating greenhouse gas emissions from industry. This paper discusses the potential contribution of industrial energy-efficiency technologies and policies to reduce energy use and greenhouse gas emissions to 2030.