Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.     

Toward multiple maximum power point estimation of photovoltaic systems based on semiconductor theory

Environmental conditions, such as temperature, non‐uniform irradiation, and solar shading, deeply affect the characteristics of photovoltaic (PV) modules in PV‐assisted generation systems. Several local maximum power points (MPPs) are found in the power–voltage curve of PV systems constructed by series/parallel‐connected PV modules under partially shaded conditions. The characteristics of PV systems change unpredictably when multiple MPPs occur, so the actual MPP tracking (MPPT) becomes a difficult task. Conventional MPPT methods for the PV systems under partially shaded conditions cannot quickly find the actual MPP such that the optimal utilization of PV systems cannot be achieved. Based on the p–n junction semiconductor theory, we develop a multipoint direct‐estimation (MPDE) method to directly estimate the multiple MPPs of the PV systems under partially shaded conditions and to cope with the mentioned difficulties. Using the proposed MPDE method, the multiple MPPs of the PV systems under partially shaded conditions can be directly determined from their irradiated current–voltage and power–voltage characteristic curves. The performances of the proposed MPDE method are evaluated by examining the characteristics of multiple MPPs of PV systems with respect to different shading strengths and numbers of the shaded PV modules and also tested using the field data. The experimental results demonstrate that the proposed MPDE method can simply and accurately estimate the multiple MPPs of the PV systems under partially shaded conditions. The optimization of MPP control models and the MPPT for PV systems could be achieved promisingly by applying the proposed method. Copyright © 2014 John Wiley & Sons, Ltd.     

Leaching kinetics of neodymium in sulfuric acid from E-scrap of NdFeB permanent magnet

The leaching kinetics of neodymium in NdFeB permanent magnet powder was analyzed for the purpose of recovery of neodymium in sulfuric acid (H₂SO₄) from E-scrap (electric scrap) of NdFeB permanent magnet powder treated by oxidation roasting to form a reactant. The reaction was conducted with H₂SO₄ concentrations ranging from 2.5 to 3.5M, a pulp density of 110.8 g/L, an agitation speed of 750 rpm, and a temperature range of 30 to 70 °C. After 4 h of leaching, the neodymium content in the E-scrap powders was completely converted into a neodymium sulfate (Nd₂(SO₄)₃) solution phase in H₂SO₄ in the condition of 70 °C and 3.0M H₂SO₄. Based on a shrinking core model with sphere shape, the leaching mechanism of neodymium was determined by the rate-determining step of the ash layer diffusion. Generally, the solubility of pure rare earth elements in H₂SO₄ is decreased with an increase in leaching temperatures. However, the leaching rate of the neodymium in E-scrap powders increased with the leaching temperatures in this study because the ash layer included in the E-scrap powder provided resistance against the leaching. Using the Arrhenius expression, the apparent activation energy values were determined to be 2.26 kJmol^?1 in 2.5M H₂SO₄ and 2.77 kJmol^?1 in 3.0 M H₂SO₄.     

Modeling and reduction of crosstalk on coupled microstrip line structures and multichip modules: An FDTD approach

The finite difference time domain modeling technique is used to model the near end and far end crosstalk on coupled microstrip structures used in multichip modules. The lines are terminated in lumped resistors which closely, but not exactly, match the lines. One line is excited by a Gaussian voltage pulse produced by a Thévenin equivalent voltage source. It is shown that adding dielectric strips in the substrate below the conducting lines will reduce the peak crosstalk by as much as 80%. Eight different configurations are modeled consisting of dielectric strips with different dielectric constant combinations. All configurations are modeled with and without a metal case in order to make sure that the crosstalk reduction persists when the structure is enclosed in a metallic enclosure (this would be the case for multichip modules). The results show that using dielectric strips with the smallest possible dielectric constant reduces crosstalk the most. © 1996 John Wiley & Sons, Inc.     

从PCB和IC设计领域管理信号完整性

如果你考察我们试图用来获得应力模型或者类似模型的那些“邦迪”式(凑合)的方法,就会发现它可做不到有章可循。这就是为什么我们要花费更多的精力来试图确定需要何种模型,并判断哪种模型将为人们所接受。有待解决的最大的一个问题是,是否继续对器件的曲线来作假设,或者设法从一个确定性光刻的角度来推进问题的解决。EDA行业现在不再对模型采取消极的态度。现在,如果我们得不到所需要的东西,我们的过错将与模型的提供者一样严重。在研究90nm技术并迈向65nm节点的过程中,会出现两个层次上的信号完整性问题。在第一个层面上,你必须在数字域…     

Mining the Wheat Grain Proteome

Bread wheat is the most widely cultivated crop worldwide, used in the production of food products and a feed source for animals. Selection tools that can be applied early in the breeding cycle are needed to accelerate genetic gain for increased wheat production while maintaining or improving grain quality if demand from human population growth is to be fulfilled. Proteomics screening assays of wheat flour can assist breeders to select the best performing breeding lines and discard the worst lines. In this study, we optimised a robust LC–MS shotgun quantitative proteomics method to screen thousands of wheat genotypes. Using 6 cultivars and 4 replicates, we tested 3 resuspension ratios (50, 25, and 17 µL/mg), 2 extraction buffers (with urea or guanidine-hydrochloride), 3 sets of proteases (chymotrypsin, Glu-C, and trypsin/Lys-C), and multiple LC settings. Protein identifications by LC–MS/MS were used to select the best parameters. A total 8738 wheat proteins were identified. The best method was validated on an independent set of 96 cultivars and peptides quantities were normalised using sample weights, an internal standard, and quality controls. Data mining tools found particularly useful to explore the flour proteome are presented (UniProt Retrieve/ID mapping tool, KEGG, AgriGO, REVIGO, and Pathway Tools).     

Prevalence, distribution, and diversity of Listeria monocytogenes in retail environments, focusing on small establishments and establishments with a history of failed inspections

Despite growing concerns about cross-contamination of ready-to-eat foods with Listeria monocytogenes, our knowledge about the ecology and transmission of L. monocytogenes in retail establishments has remained limited. We conducted a cross-sectional study to characterize the prevalence, distribution, and subtype diversity of L. monocytogenes in 120 New York State retail deli establishments that were hypothesized to present an increased risk for environmental L. monocytogenes contamination (i.e., small establishments and establishments with a history of failed New York State Agriculture and Markets inspections). Analysis of these data along with previously reported data for 121 predominantly larger retail establishments in New York State identified establishment size, geographic location, and inspection history as significant predictors of L. monocytogenes presence and prevalence. The odds of an establishment being L. monocytogenes positive were approximately twice as high for large establishments, establishments located in New York City, or establishments with poor inspection history (as compared with establishments without these attributes), even though correlation between location and inspection history complicated interpretation of results. Within an establishment, L. monocytogenes was significantly more prevalent on nonfood contact surfaces than on food contact surfaces; prevalence was particularly high for floors and in floor drains, sinks, the dairy case, and milk crates. L. monocytogenes subtype diversity differed between sites, with lineage I isolates significantly associated with nonfood contact surfaces and lineage II isolates significantly associated with food contact surfaces. Isolates belonging to the same ribotype were often found dispersed across multiple sites within an operation.     

Effects of alkaline and acid pretreatment on the physical properties and nanostructures of the gelatin from channel catfish skins

The objective of this study was to illustrate the correlation between the physical properties and nanostructure of gelatins made of channel catfish (Ictalurus punctatus) skins. The gelatin samples were first pretreated with sodium hydroxide, acetic acid, or water, and then extracted with hot water before the measurement. Physical properties including the yield of protein, viscosity and textural properties were determined on gelatins obtained with different pretreatment conditions. The acid pretreatment group showed the highest gel strength and protein yield, and a reasonable viscosity. The water pretreatment group showed the lowest values for all of the physical properties. Four samples including water, 0.1 M acid and 0.25 and 1.0 M alkaline-pretreated groups’ nanostructures were then studied using atomic force microscopy (AFM). The AFM images showed that the acid-pretreated gelatin was composed of sponge-like aggregates, while the others showed separated individual aggregates. Annular pores were only found in the alkaline pretreatment group. There was no significant correlation between the diameters of the spherical aggregates and the physical properties; however, the different AFM patterns may relate to the gelatin's physical properties.