A power-efficient vertical handover with MIH-based network scanning through consistency check

We propose an power-efficient scanning scheme considering the consistency of the Information Element (IE) for the Media Independent Handover (MIH) based Vertical Handover. Since the Green IT is one of the key issues of the science, we suggested the power saving scheme by extending the information and the event service of the MIH framework to reduce the number of full scanning. We proposed the criteria to select the update MT to quantify the power consumption alongside various network scanning methods. Since the frequent and multiple network scanning incurred by small mobile terminals (MT) is considerable, the scanning avoidance is essential for the framework we suggest. The MIH Information Service (MIIS) provides many usable factors and features for the scanning avoidance. However, because of the absence of the criteria to select the update node, these values are not actually usable. Therefore, we suggest an Energy Efficient Function, which tests the validity of MIIS values and makes a decision on whether to avoid the scanning or not.     

On detecting co-resident cloud instances using network flow watermarking techniques

Virtualization is the cornerstone of the developing third-party compute industry, allowing cloud providers to instantiate multiple virtual machines (VMs) on a single set of physical resources. Customers utilize cloud resources alongside unknown and untrusted parties, creating the co-resident threat—unless perfect isolation is provided by the virtual hypervisor, there exists the possibility for unauthorized access to sensitive customer information through the exploitation of covert side channels. This paper presents co-resident watermarking, a traffic analysis attack that allows a malicious co-resident VM to inject a watermark signature into the network flow of a target instance. This watermark can be used to exfiltrate and broadcast co-residency data from the physical machine, compromising isolation without reliance on internal side channels. As a result, our approach is difficult to defend against without costly underutilization of the physical machine. We evaluate co-resident watermarkingunder a large variety of conditions, system loads and hardware configurations, from a local laboratory environment to production cloud environments (Futuregrid and the University of Oregon’s ACISS). We demonstrate the ability to initiate a covert channel of 4 bits per second, and we can confirm co-residency with a target VM instance in $<$ 10 s. We also show that passive load measurement of the target and subsequent behavior profiling is possible with this attack. We go on to consider the detectability of co-resident watermarking, extending our scheme to create a subtler watermarking attack by imitating legitimate cloud customer behavior. Our investigation demonstrates the need for the careful design of hardware to be used in the cloud.     

Effect of Composition on the Electromechanical Properties of (1-x)Pb(Mg1/3Nb2/3)O3−XPbTiO3 Ceramics

Ceramic lead magnesium niobate–lead titanate ((1-x)PMN_-xPT) of different compositions has been prepared by the columbite precursor method. This study discusses compositions ranging from 0.94PMN–0.06PT to 0.60PM–N0.40PT, focusing on two areas of the (1-x)PMN_xPT system: compositions that exhibit electrostrictive behavior, and those that show piezoelectric behavior. In electrostrictive compositions where x is in the range of 0.06–0.20, the dielectric constant and electromechanical coupling factor dependencies on the bias field are evaluated. The optimal electromechanical properties are obtained with the composition 0.82PMN–0.18PT, measured at temperature T = T_m (the temperature of maximum dielectric constant) = 80°C and with a dc bias of 5 kV/cm. X–ray diffractometry is used to show that the (1-x)PMN_-xPT system has a compositionally wide two–phase region and that 0.655PMN–0.345PT is the morphotropic phase boundary (MPB) composition. Electromechanical property evaluation shows that the optimal piezoelectric properties (piezoelectric charge coefficient ( d₃₃ ) value of 720 pC/N, dielectric constant ( K ) value of 5400, and electromechanical planar and thickness coupling coefficient ( k_p and k_t , respectively) values of 62% and 46%, respectively) are obtained at the MPB composition.     

Specificity of Systemically Released Cotton Volatiles as Attractants for Specialist and Generalist Parasitic Wasps

Cotton plants under herbivore attack release volatile semiochemicals that attract natural enemies of the herbivores to the damaged plant. The volatiles released in response to herbivory are not only released from the damaged leaves but from the entire cotton plant. We found that cotton plants that released myrcene, (Z)-3-hexenyl acetate, (E)--ocimene, linalool, (E)-4,8-dimethyl-1,3,7-nonatriene, (E)--farnesene, and (E, E)-4,8,12-trimethyl-1,3,7,11-tridecatetraene systemically from undamaged leaves of caterpillar damaged plants were attractive to the generalist parasitoid Cotesia marginiventris and the specialist parasitoid Microplitis croceipes. Plants from which the caterpillar damaged leaves were removed and that released those compounds systemically were significantly preferred over undamaged control plants in two-choice experiments in a flight tunnel. Artificially damaged cotton plants that released green leafy volatiles and constitutive terpenoids were less attractive for M. croceipes and C. marginiventris. Only C. marginiventris preferred artificially damaged plants over undamaged control plants, whereas M. croceipes showed no preference. The apparent lack of specificity of systemically released compounds in response to different herbivores feeding on the lower leaves is discussed.     

Synthesis and dielectric properties of polystyrene‐clay nanocomposite materials

Polystyrene‐clay nanocomposite (PsCN) materials were synthesized and their properties of crystallinity, thermal behavior, and dielectric characteristics were investigated. A polymerizable cationic surfactant, [2‐(dimethylamino)ethyl]triphenylphonium bromide, was used for the intercalation of montmorillonite (MMT). The organophilic MMT was prepared by Na⁺‐exchanged MMT and ammonium cations of a cationic surfactant in an aqueous medium. Organophilic styrene monomers were intercalated into the interlayer regions of organophilic clay hosts followed by a free‐radical polymerization. Exfoliation to 2 wt % MMT in the polystyrene (PS) matrix was achieved as revealed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Thermal properties by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were also studied. The dielectric properties of PsCNs in the form of film with clay loading from 1.0 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 25–70°C. A decreased dielectric constant and low dielectric loss were observed for PsCN materials. The dielectric response at low frequency that originated from dipole orientation was suppressed due to the intercalation of clay materials. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1368–1373, 2004     

Performance of estimating depth in projection based stereoscopic virtual display

Accurate distance estimation is essential for effective user interaction with objects appearing in the virtual space. Research has shown that the distance estimation in the virtual space is not as accurate as that in the real world. The inaccuracy phenomenon is almost exclusively documented for estimating objects appearing straight ahead of the eye. A collection of the accuracy data for targets located in different angles of view in the visual field may be useful in aiding the design of user‐virtual object interaction. This study collected the object to object distance estimation accuracy for targets displayed stereoscopically. There are five horizontal and two vertical viewing angles and three depths, resulting in a total of 30 locations in the virtual space. The distance estimation for any of the 30 object pairs were performed with or without the aid of spatial cues. Significant factors influencing the accuracy and time of distance estimation were identified. Implications of the finding were discussed with respect to the stereoscopic display environment.     

An introduction to the Information Display Measurement Standard 1, the first display measurement standard from the International Committee for Display Metrology

On June 1, 2012, the Information Display Measurement Standard version 1 was released. This is the first standard from the worldwide standard group, the International Committee for Display Metrology, a standards committee within SID, and it culminates several years worth of development from many contributors at various levels. It has 26 top‐level chapters and a total over 450 sections of all parts, including over 200 measurement sections and 8 appendices that cover 133 topics of display metrology, tutorials, technical discussions, and references. Herein is an overview of the Information Display Measurement Standard version 1, including the structure of the document, tips, tricks, and hidden features, how it is maintained, support material, a breakdown of its contents, and finally, a sampling of four of the over 200 measurements. The standard is available as a free download and can be found on the International Committee for Display Metrology home page — http://www.icdm‐sid.org .     

Spectral preconditioning of Krylov spaces: Combining PLS and PC regression

In regularized regression the vectors that lie in Krylov and eigen subspaces, formed in PLS and PC regressions respectively, provide useful low dimensional approximations for the LS regression coefficient vector. By preconditioning the LS normal equations we provide a framework in which to combine these methods, and so exploit both of their respective advantages. The link between the proposed method to orthogonal signal correction and to cyclic subspace regression is made. The performance of the proposed solution in reducing the dimension of the regression problem, and the shrinkage properties of the resulting coefficient vector, are both examined.     

On the forced vibration of the fiber partially immersed in fluid

In this paper an experimental and theoretical investigation of the forced vibration of a partially immersed fiber has been carried out. An optical method utilizing a forward light scattering pattern has been used to detect a small (<1.0 μm) vibration amplitude of the fiber. The physical and mathematical model of the partially immersed fiber vibration has been put forward. Based on an analytical solution of the model, natural frequencies of the partially immersed fiber vibration have been found; they are consecutive positive roots of the transcendental equation. An “effective” speed of the wave propagation over the fiber has been introduced, which allows one to find the physical meaning of normal modes of the partially immersed fiber vibration. Theoretical predictions agree well with experimental data. The sensor exhibits an excellent sensitivity and could be used for measuring physical properties of fluids and liquid level.