High quality LTCC resonator for voltage-controlled oscillator

Design and technology of microwave conductor lines embedded in low-temperature cofired ceramic (LTCC) multilayer substrates are summarized with a focus on achieving the highest possible quality (Q) factor for a given line inductance. The work was initiated to test the integrability of base station voltage-controlled oscillators (VCOs) in ceramic multilayer substrates. This approach leads to a miniaturization of current versions by a factor of 2 to 4. However, base station specifications for phase noise and hence resonator Q are extremely demanding. Therefore, both the design and the processing technology were optimized. By choosing a twin-line design with two parallel lines vertically separated by a single LTCC layer, Q factors of 90 and 180 have been achieved for integrated 5.5 nH inductors at frequencies of 640 MHz and 1650 MHz, respectively. Application of this result to VCO modules in standard LTCC technology already yields low phase noise levels, e.g., -136 dBc/Hz at 100 kHz offset, which is suitable for base station applications. However, further noise reduction is expected from a dedicated high Q fabrication process that uses conventional via punching and filling steps to replace the ceramic material between the two lines by conductive silver paste. This raises the Q to 120 and 200, respectively, at the two frequencies and adds extra degrees of freedom to LTCC design for low-loss wireless solutions.     

Multiresolution Representation of 2D CSG Models

Multiresolution is currently one of the main schemes used in CAD modeling for representing objects, particularly when large-scale geometric data must be transferred interactively over a network, as in the case of collaborative design. Increasingly complex products and growing competition have turned design into a collaborative team effort. Furthermore, the widespread development of Internet viewers has also necessitated the transfer and display of large-scale CAD models over networks. In order to reduce the volume of transferred data, efforts have been made to transfer CSG (Constructive Solid Geometry) models rather than those based on B_rep (Boundary Representation). This paper presents an original new method for speeding up data transfer by using multiresolution CSG models at different levels of details (LOD). The multiresolution CSG algorithm generates a hierarchy of multiresolution CSG trees; at each level, the shape is further approximated and represented by a smaller number of CSG primitives. The paper analyzes the proposed algorithm, and demonstrates its feasibility.     

Temporal and spatial aspects of an environmental stimulus influence the dynamics of behavioral regulation of the Aplysia siphon-withdrawal response.

Exposure to turbulence, an environmental stimulus, produces behavioral adaptation in the Aplysia siphon-withdrawal response (SWR). The authors show that the duration and spatial extent of turbulence influence adaptation recovery. In terms of duration, recovery in whole animals and reduced preparations (tail, siphon, and CNS) was more rapid after longer exposures to turbulence (10 min) than after briefer exposures (10 s-5 min). In terms of spatial extent, recovery in reduced preparations was more rapid after diffuse turbulence (tail and siphon together) compared with focal turbulence (siphon alone). Furthermore, spatial extent and duration interact: Duration regulates recovery only when turbulence is diffuse. Results suggest that SWR adaptation reflects a composite of cellular processes, including short-term synaptic enhancement in L30 inhibitory interneurons. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Tissue fixation security in transosseous rotator cuff repairs: a mechanical comparison of simple versus mattress sutures

The primary purpose of this investigation was to compare tissue fixation security by simple sutures versus mattress sutures in transosseous rotator cuff repair. These two repair techniques were each performed in 17 human cadaver shoulders, with two bone tunnels being used for the repair by two simple sutures and two other bone tunnels being used for the repair by one mattress suture. The repairs were loaded to failure in a servohydraulic materials test system. Rotator cuff repair by simple sutures was found to be significantly stronger than repair by mattress sutures (P = .0007). The average ultimate load to failure for the simple suture construct (189.62 N) was 39.72% greater than that for the mattress suture construct (135.71 N). Most of the failures occurred by suture breakage at the knot. Load-sharing by multiple suture tails and multiple knots in the simple suture configuration likely contributed to its superior strength characteristics compared with the mattress suture configuration.     

Microphase structure and calculations of the interphase in poly (styrene-b-methylphenylsiloxane) diblock copolymers: a comparative study from small-angle X-ray scattering,electron spectroscopic imaging and solid-state nuclear magnetic resonance

The microphase structure of a series of poly (styrene-b-methylphenylsiloxane) (PS-b-PMPS)-diblock copolymers with various compositions and molecular weights has been studied by small-angle X-ray scattering, electron spectroscopic imaging and solid-state nuclear magnetic resonance spectroscopy. This diblock copolymer system is miscible within a distinct range of temperature and molecular weight exhibiting an upper critical solution temperature. The three chosen methods which complement each other can be applied to the chemically unmodified model system. The results of the various measurements correlate to describe the microphase structure, the domain size and the interphase.     

Influence of Threshold Stress on the Estimation of the Weibull Statistics

The influence of threshold stress on the estimation of the Weibull statistics is discussed in terms of the Akaike information criterion. Numerical simulations show that, if sample data are limited in number and threshold stress is not too large, the two-parameter Weibull distribution is still a preferred choice. For example, the fit of strength data of glass and ceramics to the two- and three-parameter Weibull distributions is compared.     

Rail-to-rail amplifier input stage with constant g/sub m/ and commonmode elimination

A new scheme for achieving rail-to-rail input to an amplifier is introduced. Constant g/sub m/ and common mode removal is obtained by using a single input differential pair and tunable DC level shifters via multiple input floating gate transistors. The feedback circuitry basically fixes the common mode of the amplifier, resulting in consistent and stable operation for rail-to-rail inputs and a high common mode rejection ratio.     

Does Physiological Blood Glucose Control Require an Adaptive Control Strategy?

To test the hypothesis that only an adaptive algorithm would guarantee optimal feedback control of glycemia in insulin-dependent diabetes, fasting chronically diabetic dogs at rest were subjected to short-term artificial beta cell treatment. Insulin was applied intravenously and an oral glucose load was given during the experiment. Employing the same dosing algorithm, three different control strategies were employed in a random order on different days: adaptive control (minimum variance controller, Test A), fixed command control using on-line parameter estimates (Test B), and fixed command control using off-line individually optimized dosage constants (Test C). Comparison was made to nondiabetic control animals. The glycemic profiles were entirely normal in Test A and C, but were distinctly elevated in Test B. The peripheral hyperinsulinaemia could, however, not be avoided by adaptive control. It is concluded that the restoration of physiological blood glucose control in insulin-dependent diabetes requires dosage parameters which are either continually adapted to the actual situation (adaptive control) or are optimized to meet the individual's needs. In the latter case, fixed command control may be employed. Peripheral hyperinsulinaemia cannot be avoided as long as insulin is administered by a posthepatic route.