A novel dual circulating fluidized bed system for chemical looping processes

A fluidized bed system combining two circulating fluidized bed reactors is proposed and investigated for chemical looping combustion. Direct hydraulic communication of the two circulating fluidized bed reactors via a fluidized loop seal allows for high rates of global solids circulation and results in a stable solids distribution in the system. A 120 kW fuel power bench scale unit was designed, built, and operated. Experimental results are presented for natural gas as fuel using a nickel‐based oxygen carrier. No carbon was lost to the air reactor under any conditions operated. It is shown from fuel power variations that a turbulent/fast fluidized bed regime in the fuel reactor is advantageous. Despite the relatively low riser heights (air reactor: 4.1 m, fuel reactor: 3.0 m), high CH₄ conversion and CO₂ yield of up to 98% and 94%, respectively, can be reported for the material tested. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Rapid Matrix‐Assisted Refolding of Histidine‐Tagged Proteins

Matrix refolded : The formation of inclusion bodies, which are amorphous aggregates of misfolded insoluble protein, during recombinant protein expression, is one of the biggest bottlenecks in protein science. We report a stepwise, rational optimization procedure for refolding of insoluble proteins (see scheme). In comparison to refolding in‐solution, this parallelized, matrix‐assisted approach allows the refolding of various proteins in a fast and efficient manner.

     

Composition of Commercial Bis(2‐ethylhexyl) Sulfosuccinate Surfactant By‐Products and their Effects on an Agrochemical Formulation

Sodium bis(2‐ethylhexyl) sulfosuccinate (known as AOT) is a commercially available surfactant commonly used in agrochemicals. Besides the principal diester surfactant, the commercial AOT product contains two surface‐active isomeric monoester by‐products, which may influence the surfactant's overall properties. This work investigates whether the purity of the surfactant affects its ability to stabilize an agrochemical formulation. The concentrations of the diester and two monoester impurities in batches of commercial AOT product from several suppliers were determined quantitatively by liquid chromatography–mass spectrometry. The tested batches showed different contents of the monoesters. Samples of a model agrochemical formulation containing the AOT product formed more sediment during storage when the content of monoesters in the surfactant was high. The supplier of an commercial AOT product could be traced by analysis of the monoester content of either the raw product or the aged agrochemical formulation.     

Early Pregnancy Biomarkers in Pre-Eclampsia: A Systematic Review and Meta-Analysis

Pre-eclampsia (PE) complicates 2%–8% of all pregnancies and is an important cause of perinatal morbidity and mortality worldwide. In order to reduce these complications and to develop possible treatment modalities, it is important to identify women at risk of developing PE. The use of biomarkers in early pregnancy would allow appropriate stratification into high and low risk pregnancies for the purpose of defining surveillance in pregnancy and to administer interventions. We used formal methods for a systematic review and meta-analyses to assess the accuracy of all biomarkers that have been evaluated so far during the first and early second trimester of pregnancy to predict PE. We found low predictive values using individual biomarkers which included a disintegrin and metalloprotease 12 (ADAM-12), inhibin-A, pregnancy associated plasma protein A (PAPP-A), placental growth factor (PlGF) and placental protein 13 (PP-13). The pooled sensitivity of all single biomarkers was 0.40 (95% CI 0.39–0.41) at a false positive rate of 10%. The area under the Summary of Receiver Operating Characteristics Curve (SROC) was 0.786 (SE 0.02). When a combination model was used, the predictive value improved to an area under the SROC of 0.893 (SE 0.03). In conclusion, although there are multiple potential biomarkers for PE their efficacy has been inconsistent and comparisons are difficult because of heterogeneity between different studies. Therefore, there is an urgent need for high quality, large-scale multicentre research in biomarkers for PE so that the best predictive marker(s) can be identified in order to improve the management of women destined to develop PE.     

Optimal Decision Rules for Biomarker-Based Subgroup Selection for a Targeted Therapy in Oncology

Throughout recent years, there has been a rapidly increasing interest regarding the evaluation of so-called targeted therapies. These therapies are assumed to show a greater benefit in a pre-specified subgroup of patients—commonly identified by a predictive biomarker—as compared to the total patient population of interest. This situation has led to the necessity to develop biostatistical methods allowing an efficient evaluation of such treatments. Among others, adaptive enrichment designs have been proposed as a solution. These designs allow the selection of the most promising patient population based on an efficacy analysis at interim and restricting recruitment to these patients afterwards. As has recently been shown, the performance of the applied interim decision rule in such a design plays a crucial role in ensuring a successful trial. In this work, we investigate the situation when the primary outcome of the trial is a binary variable. Optimal decision rules are derived which incorporate the uncertainty about the treatment effects. These optimal decision rules are evaluated with respect to their performance in an adaptive enrichment design in terms of correct selection probability and power, and are compared to proposed ad hoc decision rules. Our methods are illustrated by means of a clinical trial example.     

Oxidized LDL Is Strictly Limited to Hyperthyroidism Irrespective of Fat Feeding in Female Sprague Dawley Rats

Metabolic dysfunctions might play a crucial role in the pathophysiology of thyroid dysfunctions. This study aimed to investigate the impact of a controlled diet (normal versus high fat feeding) on hypothyroid and hyperthyroid Sprague Dawley rats. Female Sprague Dawley rats (n = 66) were grouped into normal diet (n = 30) and high-fat diet (n = 36) groups and subdivided into controls, hypothyroid and hyperthyroid groups, induced through propylthiouracil or triiodothyronine (T3) treatment, respectively. After 12 weeks of treatment metabolic parameters, such as oxidized LDL (oxLDL), malondialdehyde (MDA), 4-hydroxynonenal (HNE), the lipid profile, body weight and food intake parameters were analyzed. Successfully induced thyroid dysfunctions were shown by T3 levels, both under normal and high fat diet. Thyroid dysfunctions were accompanied by changes in calorie intake and body weight as well as in the lipid profile. In detail, hypothyroid rats showed significantly decreased oxLDL levels, whereas hyperthyroid rats showed significantly increased oxLDL levels. These effects were seen under high fat diet and were less pronounced with normal feeding. Taken together, we showed for the first time in female SD rats that only hyper-, but not hypothyroidism, is associated with high atherogenic oxidized LDL irrespective of normal or high-fat diet in Sprague Dawley rats.     

Alleged Detrimental Mutations in the SMPD1 Gene in Patients with Niemann-Pick Disease

Loss-of-function mutations in the sphingomyelin phosphodiesterase 1 (SMPD1) gene are associated with decreased catalytic activity of acid sphingomyelinase (ASM) and are the cause of the autosomal recessive lysosomal storage disorder Niemann-Pick disease (NPD) types A and B. Currently, >100 missense mutations in SMPD1 are listed in the Human Gene Mutation Database. However, not every sequence variation in SMPD1 is detrimental and gives rise to NPD. We have analysed several alleged SMPD1 missense mutations mentioned in a recent publication and found them to be common variants of SMPD1 that give rise to normal in vivo and in vitro ASM activity. (Comment on Manshadi et al. Int. J. Mol. Sci.2015, 16, 6668–6676).     

Additive Manufacturing of Dense Alumina Ceramics

In this study, a new process for additive manufacturing (AM) of dense and strong ceramic objects is described. The lithography‐based ceramic manufacturing (LCM) technique is based on the selective curing of a photosensitive slurry by a dynamic mask exposure process. The LCM technique is able to produce strong, dense and accurate alumina ceramics without virtually any geometrical limitations. With over 99.3% of a theoretical alumina density, four‐point bending strength of 427 MPa, and very smooth surfaces, the LCM process distinguishes itself from other AM techniques for ceramics and provides parts with very similar mechanical properties as conventionally formed alumina.     

Asymmetric Transfer Hydrogenation of Ketones with Modified Grubbs Metathesis Catalysts: On the Way to a Tandem Process

Herein, we report the successful transformation of a 1^st generation Grubbs metathesis catalyst into an asymmetric transfer hydrogenation (ATH) catalyst. Upon addition of a chiral amine ligand, an alcohol and a base, the 1^st generation Hoveyda–Grubbs catalyst ( HG‐I ) was found to promote the enantioselective reduction of acetophenone to 1‐phenylethanol. After optimizing the order of addition and the reaction conditions, the substrate scope was assessed leading to enantiomeric excesses up to 97% ee. NMR experiments were run in order to get information about the in situ‐generated ATH catalyst. Furthermore, the possibility to perform olefin metathesis and ketone transfer hydrogenation sequentially in one pot was demonstrated, and the first tandem olefin metathesis–ketone asymmetric transfer hydrogenation was carried out.