The structural consequences of exchanging tryptophan and tyrosine residues in B.stearothermophilus lactate dehydrogenase

A mutant Bacillus stearothermophilus lactate dehydrogenase hasbeen prepared in which all three tryptophan residues in thewild-type enzyme have been replaced by tyrosines. In addition,a tyrosine residue has been mutated to a tryptophan, which actsas a fluorescence probe to monitor protein folding. The mutantenzyme crystallizes in the same crystal form as the wild-type.The crystal structure of the mutant has been determined at 2.8Å resolution. Solution studies have suggested that thereis little effect upon the mutant enzyme as judged by its kineticproperties. Comparison of the crystal structures of the mutantand wild-type enzymes confirms this conclusion, and revealsthat alterations in structure in the region of these mutationsare of a similar magnitude to those observed throughout thestructure, and are not significant when compared with the errorsin atomic positions expected for a structure at this resolution.     

THE SUM OF FINITE MOVING AVERAGE PROCESSES

Abstract. It is well known that the sum of moving average processes is itself a moving average process. Existing theory does not provide formulae relating the innovations in the sum process to those in the component processes when some zeros of the autocovari-ance function of the sum process are on the unit circle. This gap is filled here by first showing that these zeros are necessarily shared by the component processes. Conditions for the innovations in the sum process to be current are given. Throughout the paper contemporary innovations in the component processes are allowed to be correlated, replacing the usual assumption that they are uncorrelated.     

Properties of poly(ethylene terephthalate) prepared by high-pressure extrusion in a capillary die

The procedure of Southern and Porter has been used to prepare poly(ethylene terephthalate) segments by high-pressure extrusion in an Instron capillary rheometer at temperatures from 245° to 265°C. X-Ray measurements of crystalline orientation along the axis of long-growth segments showed that segment properties were controlled by the time-dependent crystallization of polymer melt in the rheometer reservoir. During the initial stage of extrusion, a highly oriented, translucent segment was generated by flow-induced crystallization. However, formation of the translucent morphology eventually stopped, and thereafter a poorly oriented, opaque segment was generated by solid-state extrusion. From wide- and small-angle x-ray scattering, differential scanning calorimetry, and density measurements, it was determined that the most perfect morphologies were prepared at an extrusion temperature of 265°C. In addition to having the highest degree of crystalline orientation, translucent segments extruded at 265°C have a peak melting point of 267°C and a crystallinity value of 62%. Hot-stage optical microscopy showed that the translucent segments contained axially aligned fibrous crystals whose birefringence persisted to 290°C. The exceptional thermal stability of the segments was corroborated by the results of shrinkage tests at temperatures near the melting point; even after 1 hr at 260°C, the shrinkage did not exceed 7%. The accumulated evidence suggests that the translucent segments contain an extended-chain component.     

Flow of fluidized solids and bubbles in standpipes and risers

Equations are presented for the densities of fluidized solid-bubble mixtures in downward and upward vertical flow. Data from a large commercial standpipe are in close agreement with calculations. Flow instability is predicted when downward solid flow is sufficient to hold a gas bubble stationary in a standpipe. Commercial experience of such instability is presented indicating the existence of slugs in a 45-in.-diam. standpipe.     

Simultaneous hydrolysis and fermentation of pulp mill primary clarifier sludge

Bioconversion of sludge from the primary clarifier of a sulphite pulping operation to ethanol offers a number of advantages over conventional disposal options. The amount of material which must be disposed of is reduced while, at the same time, salable and environmentally friendly fuel-ethanol is produced. In this study, primary clarifier sludge (PCS) was shown to be hydrolysed to produce fermentable sugars at a rate proportional to enzyme loading. Initial (1 hour) hydrolysis rates as high as 12.6 g reducing sugar/L · h were observed at an initial enzyme loading of 10 filter paper units (FPU)/g. Hydrolysis was inhibited by spent sulphite liquor (SSL), an inhibition which could be completely overcome by fermenting the SSL to remove sugars. Surfactants were found to only marginally improve the production of sugars. To reduce the deleterious effects of end product inhibition, single stage simultaneous hydrolysis and fermentation (SHF) was carried out using cellulase enzymes and Saccharomyces cerevisiae.     

The monounsaturated acyl- and alkyl-moieties of wax esters and their distribution in commercial orange roughy (Hoplostethus atlanticus) oil

Wax esters were isolated from commercial orange roughy (Hoplostethus atlanticus) oil by column chromatography and fractionated by argentation thin layer chromatography. Following transesterification, the resultant fatty acid methyl esters and fatty alcohols were analyzed by gas chromatography. both acyl- and alkyl-moieties were mainly of the monoene structure within the 16∶1–22∶1 range. After derivatization, the positions of the double bonds of even numbered fatty acid and fatty alcohol isomers were located by chromatography-mass spectrometry and compared. Results of these positional analyses indicate that the primary desaturation reactions takes place in the Δ9 position of pre-existing (C₁₄ to C₂₄) acyl chains. It is proposed that acyl components from 18∶1 are subjected to chain elongation to form a mixture of 24∶1 isomers as the final product. Apart from the 24∶1 acyl moiety of the wax esters, in which the double bond was almost exclusively in the Δ15 position, de novo biosynthetic reactions on acids and alcohols appear to yield related acyl- and alkyl-moieties of resynthesized wax esters.     

Holistic schedulability analysis for multipacket messages in AFDX networks

The ARINC-664, Part 7 (AFDX) standard defines a communication network based on Ethernet and the UDP/IP protocols. Contrary to general-purpose Ethernet, the timing behavior in AFDX is deterministic due to the use of special network switches and end systems with static routing tables and traffic policing at the sending end through mechanisms called virtual links. Even though the latencies in this network are bounded, there are scheduling and contention effects that need to be analyzed. In this paper we develop a response-time analysis for multipacket messages transmitted through an AFDX network including the scheduling of the virtual links and sub-virtual links, and also the contention in the end systems and in the switches. This analysis allows us to obtain worst-case latencies and output jitter for the network messages with a precise modeling of the sending and receiving ends. These results can be integrated in a holistic approach with the response time analysis of the threads in the processing nodes to obtain end-to-end response times in heterogeneous distributed systems.     

Whispering gallery modes in photoluminescence and Raman spectra of a spherical microcavity with CdTe quantum dots: anti-Stokes emission and interference effects

We have studied the photoluminescence and Raman spectra of a system consisting of a polystyrene latex microsphere coated by CdTe colloidal quantum dots. The cavity-induced enhancement of the Raman scattering allows the observation of Raman spectra from only a monolayer of CdTe quantum dots. Periodic structure with very narrow peaks in the photoluminescence spectra of a single microsphere was detected both in the Stokes and anti-Stokes spectral regions, arising from the coupling between the emission of quantum dots and spherical cavity modes.     

Design of High-Quality Pt–CeO2 Composite Anodes Supported by Carbon Black for Direct Methanol Fuel Cell Application

A Pt on nano-sized CeO₂ particles that in turn are supported on carbon black (CB) was synthesized using the co-impregnation method. This potential anode material for fuel cell applications was synthesized in a stepwise process. The pure CeO₂ was synthesized using an ammonium carbonate precipitation method, and the Pt particles dispersed on the CeO₂ in such a way that a uniform dispersion with the CB was obtained (Pt–CeO₂/CB). The electrochemical activity of the methanol (CH₃OH) oxidation reaction on the Pt–CeO₂/CB was investigated using cyclic voltammetry and chronoamperometry experimentation. The onset potential of CH₃OH oxidation reaction on the Pt–CeO₂/CB anode was shifted to a lower potential as compared with that on commercially available Pt–Ru/carbon (C) alloy anode. In addition, the activation energy of the Pt–CeO₂/CB anode was much lower than that of the Pt–Ru/C alloy anode. Moreover, the current density of the Pt–CeO₂/CB anode was much higher than that of the Pt–Ru/C alloy anode at temperatures between 28° and 60°C. These results suggest that the anode performance of the Pt–CeO₂/CB anode at the operating temperature of typical fuel cells (80°C) is superior to that of the more usual Pt–Ru/C alloy anode. Importantly, the rare metal, Ru, is not required in the present anode material and the amount of Pt required is also significantly reduced. As a consequence, we report a promising candidate Pt–CeO₂/CB composite anode for application in the development of direct methanol fuel cells.     

Nonflat surface level pyramid: a high connectivity multidimensional interconnection network

Parallel machines are extensively used to increase computational speed in solving different scientific problems. Various topologies with different properties have been proposed so far and each one is suitable for specific applications. Pyramid interconnection networks have potentially powerful architecture for many applications such as image processing, visualization, and data mining. The major advantage of pyramids which is important for image processing systems is hierarchical abstracting and transferring the data toward the apex node, just like the human being vision system, which reach to an object from an image. There are rapidly growing applications in which the multidimensional datasets should be processed simultaneously. For such a system, we need a symmetric and expandable interconnection network to process data from different directions and forward them toward the apex. In this paper, a new type of pyramid interconnection network called Non-Flat Surface Level (NFSL) pyramid is proposed. NFSL pyramid interconnection networks constructed by L-level A-lateral-base pyramids that are named basic-pyramids. So, the apex node is surrounded by the level-one surfaces of NFSL that are the first nearest level of nodes to apex in the basic pyramids. Two topologies which are called NFSL-T and NFSL-Q originated from Trilateral-base and Quadrilateral-base basic-pyramids are studied to exemplify the proposed structure. To evaluate the proposed architecture, the most important properties of the networks are determined and compared with those of the standard pyramid networks and its variants.