Multistaged Anaerobic Sludge Digestion Processes

Two multistaged anaerobic digestion systems, a four-stage thermophilic anaerobic digestion (4TAD), all at 55°C, and a four-stage anaerobic digestion with a tapered temperature configuration (4ADT) at 55, 49, 43, and 37°C, respectively, were studied to evaluate their solids, volatile organic sulfur compounds, and indicator organism (E. coli and fecal coliform) reduction potentials. The 4TAD system removed significantly more volatile solids from sludges than the 4ADT system (6%). However, the dewatered biosolids cakes from the 4ADT system generated fewer organic sulfur compounds than those from the 4TAD system. Both multistage systems showed better digestion efficiencies than single-stage mesophilic or single-stage thermophilic anaerobic digesters at the same overall retention time. However, the lowest organic sulfur compounds were observed from the single mesophilic system. Both multistage anaerobic digestion systems failed to dramatically remove DNA of the indicator organism, E. coli, quantified by real time polymerase chain reaction, even though the indicator organism densities measured by standard culturing methods satisfied EPA Class A biosolids requirements.     

Emergency Contracting Strategies for Federal Projects

During the past decade, government agencies have struggled to adequately respond to emergency events that require labor, materials, equipment, and services provided by construction contractors. In fact, the criticism directed at government agencies during their response to, and recovery after, recent events is a testament to the insufficient contracting strategies that were implemented. Countless media headlines highlighted the fragmented approach used to hire contractors expeditiously, and several agencies were criticized for their inconsistent contracting methods. As a result, a study was initiated to investigate the differences between normal federal contracting procedures, as outlined in the Federal Acquisition Regulation (FAR), and emergency acquisition procedures that are permitted by the FAR. The study found six examples of waivers to the usual regulations or expedited contracting techniques permitted by the FAR. Furthermore, the study highlighted five emergency contract strategies that are available to the Navy (as one example of a government agency with contracting authority) and may be available to other governmental contracting authorities as well. Consequently, the purpose of this paper is to identify emergency contract strategies that can be used by government agencies and to outline the criteria that must be met to use each strategy.     

Self-generated validity and other effects of measurement on belief, attitude, intention, and behavior.

Drawing from recent developments in social cognition, cognitive psychology, and behavioral decision theory, we analyzed when and how the act of measuring beliefs, attitudes, intentions, and behaviors affects observed correlations among them. Belief, attitude, or intention can be created by measurement if the measured constructs do not already exist in long-term memory. The responses thus created can have directive effects on answers to other questions that follow in the survey. But even when counterparts to the beliefs, attitudes, and intentions measured already exist in memory, the structure of the survey researcher's questionnaire can affect observed correlations among them. The respondent may use retrieved answers to earlier survey questions as inputs to response generation to later questions. We present a simple theory predicting that an earlier response will be used as a basis for another, subsequent response if the former is accessible and if it is perceived to be more diagnostic than other accessible inputs. We outline the factors that determine both the perceived diagnosticity of a potential input, the likelihood that it will be retrieved, and the likelihood that some alternative (and potentially more diagnostic) inputs will be retrieved. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Surface Characteristics of Sorptive-Filtration Storm Water Media. II: Higher Specific Gravity (ρs > 1.0) Oxide-Coated Fixed Media

Most current control strategies for storm water treatment utilize fixed or filter-bed media with specific gravity (ρs) greater than 1.0. In contrast to Part I, Part II focuses on such higher density (ρs > 1.0) manganese-oxide-coated media that can be used in combined unit operations and processes for in-situ treatment of storm water. Methods were developed to coat manganese oxides onto sand and cementitious media for storm water treatment. With respect to manganese, coatings of ramsdellite produced a point of zero charge (PZC) of 5.2, while mixtures of birnessite and cryptomelane produced a PZC of 2.6 Manganese oxide increased the specific surface area (SSA) of sand and cementitious media. Manganese-oxide-coated sand (MOCS) produced a larger SSA (2.48-m2∕g), as compared with birnessite-coated media (BCM) (1.51 m2∕g), while the two have a similar surface charge (PZC = 6.4). Manganese-oxide-coated cementitious media (MOCM) produced a significantly larger SSA (19.49 m2∕g), as compared with coated sand, and SEM analyses indicated the surface contained manganese oxide and calcite of thickness 10–30 μm. Based on the results, coated cementitious media provided surface characteristics that can significantly enhance filtration and adsorption of heavy metal in storm water, in comparison to sand.     

Tensile strains ahead of entry into the roll gap

Tensile strains ahead of entry into the roll gap were analysed using the finite element method and compared with results of the analytical approach developed by Pawelski [1]. The longitudinal tensile strains in the stock surface ahead of contact with the roll produced by frictional contact with the roll were calculated for the different roll gap aspect ratios, h_o/L = 0.1,…1 and Coulombic friction coefficient 0.1,…0.5. The results have been analysed in terms of oxide failure resulting from this kind of deformation and compared with predictions using the advanced oxide scale model. A simple formula has been developed to evaluate the longitudinal strain component at entry into the roll gap for a given friction coefficient and aspect ratio. It was related to cracking of the oxide scale in tension at this area. Prediction of the scale behaviour at this area is a key to understanding the friction and heat transfer phenomena taking place at the roll/stock interface. It is also important for optimisation of descaling operations.     

Objective Measurement of Cognitive Fatigue in Multiple Sclerosis.

Objective: Objective examination of cognitive fatigue in persons with multiple sclerosis (MS). Participants: Fifty-six individuals with MS and 39 age- and education-matched healthy control subjects. Main Outcome Measures: Cognitive fatigue, operationalized as the failure to sustain effort over the course of a continuous working memory task; performance on the Paced Auditory Serial Addition Test was examined, with number of correct responses generated and responses produced under conditions of sustained central executive load as the dependent variables. Results: Cognitively impaired MS subjects produced significantly fewer correct responses than either nonimpaired MS subjects or healthy control subjects, who performed at a comparable level. Both MS groups, however, showed susceptibility to cognitive fatigue significantly earlier in time than the healthy group. Conclusions: Fatigue can influence performance even in the absence of cognitive impairment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modeling Compression Behavior of Structured Geomaterials

The influence of the natural (or artificially induced) structure of a geomaterial on its compression behavior is investigated. An approach for modeling this influence for various structured geomaterials is proposed by using the disturbed state concept. An isotropic compression model is formulated on three basic assumptions. A special version of the proposed model is also described for situations where the compression is one-dimensional. The proposed compression model is used to simulate the behavior of a variety of structured geomaterials such as clays, sands, calcareous soils, clay-shale, soft rock, unsaturated soils, and soils artificially treated by adding chemical agents or mechanical reinforcement, and the model is evaluated on the basis of these simulations. A general discussion on the influence of the structure of geomaterials on their mechanical properties is also presented.     

Life stress and treatment course of recurrent depression: II. Postrecovery associations with attrition, symptom course, and recurrence over 3 years.

Life stress was studied in relation to postrecovery attrition, symptom course, and recurrence of depression over 3 yrs. Participants were 67 individuals with recurrent depression who had responded to treatment. Life stress was assessed for the prior 12 wks at acute treatment entry (T1), initial recovery (T2), and after 17 wks of sustained recovery (T3). Severe life events at T1 predicted greater attrition, a more favorable postrecovery symptom course, and a lower likelihood of recurrence over 3 yrs. Life stress at T2 was not predictive of outcomes. Finally, undesirable life events at T3 tended to predict a worse symptom course and a higher likelihood of recurrence, particularly for individuals on medication. The findings are discussed in terms of (a) different processes influenced by life stress over time and (b) limitations of existing longitudinal research for studying the effects of life stress over prolonged intervals. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of annealing time on solute carbon in ultralow-carbon Ti-V and Ti-Nb steels

The influence of annealing temperature and time on solute carbon levels was investigated in four ultralow-carbon (ULC) bake-hardenable steels; two Ti-V ULC steels with different V/C levels and two Ti-Nb ULC steels with different Nb/C levels. Internal-friction and scanning transmission electron microscopy (STEM) techniques were used to understand the precipitation/dissolution behavior in the various steels. An effect of annealing time on the carbon Snoek-peak height was observed in both Ti-V steels and in the Ti-Nb steel having a lower Nb/C ratio. Despite differences between these steels resulting from their composition (and, thus, carbide solubility) differences, after cold rolling and annealing at different temperatures, the maximum Snoek-peak height was achieved after annealing for shorter times in each instance, on the order of 1 minute. The highly stabilized Ti-Nb ULC steel with a higher Nb/C ratio did not show the effect because of the absence of solute carbon. For the Ti-V steels, most of the precipitates examined using STEM contained both Ti and V. The energy-dispersive X-ray (EDX) analysis indicated that both the Ti-V steels annealed at 845 °C for 1 minute have greater Ti/V ratios compared to their corresponding Ti-V steels in the as-received (hot-rolled) condition. This behavior is consistent with dissolution of carbides causing the carbon in solution to increase, as indicated by a greater carbon Snoek-peak height for both Ti-V steels in the annealed condition. The reduction in Snoek-peak height at longer annealing times is believed to be associated with segregation to lower-energy defect sites.     

Information technology at the National Computing Centre

An outline is given of the information services used in the National Computing Centre. An update is provided of a previous paper describing the local area network implemented in 1981. Three IT landmarks are highlighted, these include the introduction of word processing, the local area network and a digital PABX. The implications and subsequent developments are described. The facilities available on the local area network are discussed. The use of three electronic mail services are also considered, along with the use of facsimile.