Fatty Acid Composition, Antioxidant Properties, and Antiproliferative Capacity of Selected Cold-Pressed Seed Flours

Cold-pressed seed flours from pumpkin, parsley, mullein, cardamom, and milk thistle were examined for total oil, fatty acid profile of the oil, total phenolic content (TPC), scavenging activities against peroxyl (ORAC), hydroxyl (HOSC) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) (RDSC) radicals, and antiproliferative capacity against HT-29 human colon cancer cells. The cold-pressed parsley seed flour contained a very high concentration of total oil—17.6 g/100 g flour—with primarily C18:1 fatty acid at 86.2 g/100 g fatty acids. All other flour oils had relatively high levels of saturated fats, ranging from 39.0 to 62.9 g/100 g fatty acids. The tested seed flours demonstrated significant TPC and free radical scavenging activities. Milk thistle seed flour had the highest TPC value of 25.2 mg gallic acid equivalent per g flour (GAE mg/g) followed by that of parsley seed flour at 8.1 GAE mg/g. Milk thistle seed-flour extract also had significantly higher antioxidant activities than all other extracts against all tested radicals. The milk thistle seed-flour extract had an ORAC value of 1131 μmol trolox equivalents (TE) per g flour (TE μmol/g), a HOSC value of 893 TE μmol/g, and an RDSC value of 61 TE μmol/g. Also, ORAC, HOSC, and TPC values were significantly correlated (P < 0.01) under the experimental conditions. The cold-pressed milk thistle seed flour inhibited the proliferation of HT-29 cancer cells in a dose-dependent manner. Results from this study suggest that these cold-pressed seed flours may serve as natural sources of antioxidants and may be used to improve human health.     

Host Recognition by the Specialist Hoverfly <Emphasis Type="Italic">Microdon mutabilis</Emphasis>, a Social Parasite of the Ant <Emphasis Type="Italic">Formica lemani</Emphasis>

The larva of the hoverfly Microdon mutabilis is a specialist social parasite of the ant Formica lemani that is adapted to local groups of F. lemani colonies but mal-adapted to colonies of the same species situated only a few hundred meters away. At a study site in Ireland, F. lemani shares its habitat with four other ant species. All nest under stones, making the oviposition choice by M. mutabilis females crucial to offspring survival. In this study, we tested the hypothesis that, as an extreme specialist, M. mutabilis should respond to cues derived from its host rather than from its microenvironment, a phenomenon that has hitherto only been addressed in the context of herbivorous insects and their parasitoids. In behavioral assays, M. mutabilis females reacted to volatiles from F. lemani colonies by extending their ovipositors, presumably probing for an oviposition substrate. This behavior was not observed toward negative controls or volatiles from colonies of Myrmica scabrinodis, the host ant of the closely related Microdon myrmicae. Coupled gas chromatography-electroantennography (GC-EAG) that used antennal preparations of M. mutabilis located a single physiologically active compound within an extract of heads of F. lemani workers. Coupled GC-mass spectrometry (GC-MS) tentatively identified the compound as a methylated methylsalicylate. GC co-injection of the extract with authentic samples showed that of the four possible isomers (methyl 3-, 4-, 5-, and 6-methylsalicylate), only methyl 6-methylsalicylate co-eluted with the EAG-active peak. Furthermore, the response to methyl 6-methylsalicylate was four times higher than to those of the other isomers. Coupled GC-EAG and GC-MS also revealed physiological responses to two constituents, 3-octanone and 3-octanol, of the M. scabrinodis alarm pheromone. However, the behavioral trials did not reveal any behavior that could be attributed to these compounds. Results are discussed in the context of four phases of host location behavior, and of the characteristics, which volatile cues should provide to be useful for an extreme specialist such as M. mutabilis.     

Evolution of a fourth generation catalyst for the amination and thioetherification of aryl halides

Many active pharmaceuticals, herbicides, conducting polymers, and components of organic light-emitting diodes contain arylamines. For many years, this class of compound was prepared via classical methods, such as nitration, reduction and reductive alkylation, copper-mediated chemistry at high temperatures, addition to benzyne intermediates, or direct nucleophilic substitution on particularly electron-poor aromatic or heteroaromatic halides. However, during the past decade, palladium-catalyzed coupling reactions of amines with aryl halides have largely supplanted these earlier methods. Successive generations of catalysts have gradually improved the scope and efficiency of the palladium-catalyzed reaction. This Account describes the conceptual basis and utility of our latest, "fourth-generation" palladium catalyst for the coupling of amines and related reagents with aryl halides. In the past five years, we have developed these catalysts using the lessons learned from previous generations of catalysts developed in our group and in other laboratories. The ligands on the fourth-generation catalyst combine the chelating properties of the aromatic bisphosphines of the second-generation systems with the steric properties and strong electron donation of the hindered alkylphosphines of the third-generation systems. The currently most reactive catalyst in this class is generated from palladium and a sterically hindered version of the Josiphos family of ligands that possesses a ferrocenyl-1-ethyl backbone, a hindered di-tert-butylphosphino group, and a hindered dicyclohexylphosphino group. This system catalyzes the coupling of aryl chlorides, bromides, and iodides with primary amines, N-H imines, and hydrazones in high yield. The reaction has broad scope, high functional group tolerance, and nearly perfect selectivity for monoarylation. It also requires the lowest levels of palladium that have been used for C-N coupling. In addition, this latest catalyst has dramatically improved the coupling of thiols with haloarenes to form C-S bonds. Using ligands that lacked one or more of the structural elements of the most active catalyst, we examined the effects of individual structural elements of the Josiphos ligand on catalyst activity. This set of studies showed that each one of these elements contributes to the high reactivity and selectivity of the catalyst containing the hindered, bidentate Josiphos ligand. Finally, we examined the effect of electronic properties on the rates of reductive elimination to distinguish between the effect of the properties of the M-N sigma-bond and the nitrogen electron pair. We have found that the effects of electronic properties on C-C and C-N bond-forming reductive elimination are similar. Because the amido ligands contain an electron pair, while the alkyl ligands do not, we have concluded that the major electronic effect is transmitted through the sigma-bond.     

Evaluation of solvent accessibility epitopes for different dehydrogenase inhibitors

Knowledge about the orientation of ligands or inhibitors bound to a protein is vital for the development of new drugs. It was recently shown that solvent accessibility epitopes for protein ligands can be mapped by transferring magnetization from water molecules to the ligand to derive the ligand orientation. This is based on the fact that NMR signals of ligands arising from magnetization transferred from solvent molecules via the protein have a different sign from those arising from direct magnetization transfer from bulk water. Herein we critically evaluate the applicability of solvent accessibility mapping to derive binding orientations for ligands of two dehydrogenases (AKR1C3 and HSD17beta1) with very different binding pockets, including complexes in which the ligand is buried more deeply inside the protein. We also evaluate the possibility of using co-solvents, such as DMSO, for magnetization transfer.     

Hydrodesulfurization of thiophene on carbon nanofiber supported Co/Ni/Mo catalysts

Co, Mo, NiMo and CoMo catalysts supported on alumina, fishbone and platelet carbon nanofibers (CNFs) have been prepared. The dispersion of the oxide phases was qualitatively studied and compared using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The reducibility of the catalysts was studied by temperature programmed reduction (TPR). Hydrodesulfurization (HDS) of thiophene was used as a model reaction to compare the activity of different catalysts. The activity tests showed that the alumina supported catalysts exhibited higher activity compared to the corresponding CNF supported catalysts, and the NiMo catalysts were more active than the corresponding CoMo catalysts. The thiophene HDS activity was correlated with the dispersion of the molybdenum species and the reducibility of different catalysts. Interestingly, the CNF supported Co catalysts have higher thiophene HDS activity than the CNF supported Co(Ni)Mo catalysts.     

Bacterial inactivation and organic oxidation via immobilized photo-Fenton reagent on structured silica surfaces

A woven inorganic silica fabric loaded with Fe-ions (EGF-Fe) was tested under simulated solar light during hydroquinone degradation. The abatement of hydroquinone was observed to attain about 80% within 3 h. The photo-catalyst was also tested to inactive Escherichia coli K12 at “natural” pH and in the presence of a low concentration of H₂O₂. Addition of H₂O₂ (10 mg L⁻¹) did not by itself to bacterial inactivation. Total bacterial inactivation was mediated by EGF-Fe fabrics in the presence of H₂O₂ (10 mg L⁻¹) under solar light irradiation. A sample containing active (culturable) bacteria (10⁵ CFU mL⁻¹) decreased to values <1 CFU mL⁻¹ within 3 h reaction. Fe-mediated homogeneous process decreased the bacterial CFU content by about two orders of magnitude within 4 h. During the degradation of hydroquinone only a small amount of iron ions were found in solution of about 1.2 mg L⁻¹, within 90 min decreasing to values ≤0.5 mg L⁻¹ after 180 min. The leaching of Fe-ions did not affect the photo-catalyst performance since EGF-Fe fabric did not deactivate after five or more cycles. The Fe-ions founds in solution mineralized hydroquinone to levels below 37% of its initial content. The present study presents the first report on the beneficial role of a heterogeneous iron supported catalyst leading to efficient bacterial inactivation in aqueous solution with iron leaching <0.1 mg L⁻¹, the detection limit for Fe-analysis in solution. No bacterial re-growth was observed during a post-irradiation period up to 24 h in the dark.     

Towards monitoring electrostatics in gas–solid fluidized beds

The electrostatic charge distribution in a lab‐scale 2‐D fluidized bed of 900 µm glass beads was determined using arrays of induction probes, and the influence of relative humidity and superficial gas velocity was examined. The bubble presence, relative humidity, and superficial gas velocity were found to influence charge separation. Bipolar charging was observed; the net charge build‐up was found to be negligible. Moreover, the system was monitored by applying the attractor comparison method to the electrostatic charge signals from an induction probe. It was concluded that this approach can indeed be used to monitor changes in the electrostatic behaviour.     

Simulation of autothermal reforming in a staged‐separation membrane reactor for pure hydrogen production

Steam methane reforming with oxygen input is simulated in staged‐separation membrane reactors. The configuration retains the advantage of regular membrane reactors for achieving super‐equilibrium conversion, but reaction and membrane separation are carried out in two separate units. Equilibrium is assumed in the models given the excess of catalyst. The optimal pure hydrogen yield is obtained with 55% of the total membrane area allocated to the first of two modules. The performance of the process with pure oxygen input is only marginally better than with air. Oxygen must be added in split mode to reach autothermal operation for both reformer modules, and the oxygen input to each module depends on the process conditions. The effects of temperature, steam‐to‐carbon ratio and pressure of the reformer and the area of the membrane modules are investigated for various conditions. Compared with a traditional reformer with an ex situ membrane purifier downstream, the staged reactor is capable of much better pure hydrogen yield for the same autothermal reforming operating conditions.     

Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams

In this study, the effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) foams are investigated. Closed cell TPO foams were prepared by injection molding process. The microstructure of these foamed samples was controlled by carefully altering the processing parameters on the injection molding machine. The foam morphologies were characterized in terms of skin thickness, surface roughness, and relative foam density. Tensile properties and impact resistance of various injection molded TPO samples were correlated with various foam morphologies. The findings show that the mechanical properties are significantly affected by foam morphologies. The experimental results obtained from this study can be used to predict the microstructure and mechanical properties of cellular injection molded TPO foams prepared with different processing parameters.