Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

Hypervelocity impact computations with finite elements and meshfree particles

The ability of computations to model characteristics of hypervelocity impact is demonstrated using an algorithm for the automatic conversion of distorted finite elements to meshfree particles. The Lagrangian formulation tracks material boundaries and properties without the errors typical in an Eulerian formulation as the material traverses large distances. A computation of a sphere impacting a bumper is shown to reproduce three regions in the debris cloud that are observed in tests: a front region composed of droplets of melted projectile and target, a middle region of fragmented projectile, and a back region of spalled projectile. Additional computations reproduce the observed traits that result from variations in the projectile shape and obliquity. The computation of a projectile impacting spaced plates demonstrates the ability of the method to model the damage to the rear plate of a Whipple shield for spacecraft protection.     

Using rainbow net simulation to measure fault tolerance in a multiprocessor

The Rainbow net simulation technique is applied to modelling the impact of system load and fault handling on the availability of a fault-tolerant multiprocessor architecture. Rainbow nets are described along with the motivation for creating this modelling technique. A Rainbow net fault-handling model is created for the fault-tolerant multiprocessor architecture and the topology is shown to remain constant in size, independent of the number of processor, memory and I/O elements configured in the system. Simulation is performed with a varying load in terms of the number of active jobs the system must support. Results are given showing how the fault-tolerant capability varies with load. Two new metrics for evaluating fault tolerance are introduced; namely full fault-tolerability and partial fault-tolerability. They are based on simple observations in the model.     

Isolation of a non-sedimenting membrane fraction from the water soluble fraction of bovine lens

A membrane fraction was isolated from the water soluble fraction of bovine lens by increasing the density of the water soluble fraction with KBr and subjecting it to overnight centrifugation at 100000 g. We have called this fraction, which floats to the top of the mixture upon centrifugation, the non-sedimenting membrane fraction (NSMF). Electron microscopy of the NSMF revealed that it is composed of the expected membrane structures of unit membrane, fiber junction and cytoskeleton. Significantly less of the total membrane of the NSMF was devoted to fiber junction (22.8%) than in the sedimenting membrane fraction (SMF) (41.1%) prepared by sucrose density centrifugation of the water insoluble fraction. The NSMF accounted for about 7-12% of the total bovine lens membrane, and preliminary experiments demonstrated that a similar fraction could be isolated from the water soluble fraction of lenses from rats, rabbits, chickens and humans. The NSMF contained about 0.9 mg total lipid per mg total membrane protein, which was significantly greater than the value obtained for the SMF (0.5 mg total lipid per mg total membrane protein). The greater relative amount of total lipid in the NSMF was due to a significantly greater relative amount of phospholipid in the NSMF which was further reflected by the observation that the cholesterol: phospholipid molar ration of the NSMF (0.58) was significantly less than that of the SMF (0.88). Thus the relative lipid composition of the NSMF was significantly different than that of the SMF. Although the phospholipid content of the NSMF was greater than that of the SMF, the compositions of the phospholipids in the two membrane fractions were similar. The NSMF possessed essentially the same polypeptides (both extrinsic and intrinsic) which were found in the SMF. The NSMF was found to be distributed throughout the lens in a proportionate manner. We conclude that the NSMF may account for most of the lipid which remains in the water soluble fraction of the normal bovine lens after sedimentation of the water insoluble fraction. This membrane fraction substantially differs from the SMF in terms of structure and relative lipid composition. We speculate that the NSMF may represent a specialised domain of the fiber cell plasma membrane which has been previously unrecognized.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Children, robotics, and education

Popular interest in robotics has increased astonishingly in the last few years. Robotics is seen by many as offering major new benefits in education at all levels. Before rushing to exploit this popularity, educators should ask serious questions about the universality and longevity of the robotics phenomenon. Is it a fashion? To be useful, the energy released by robotics must be sustained and universal, and the means of exploiting it must be systematic. Universities define their own robotics curriculum, but most schools lack both the resources and the freedom to do this, and must work with a national curriculum. If it can be shown that robotics has sustained potential in education, it seems inevitable that new ways need to be found to integrate it into the school curriculum.     

Tilted superlattice composition profile determined by photoluminescence and thermal disordering

The composition profile of an (AlAs)_1/2(GaAs)_1/2 tilted superlattice is characterized for the first time. The tilted superlattice sample is thermally disordered, and the energy of the direct band gap photoluminescence peak is measured as a function of increasing layer interdiffusion. The shift in the photoluminescence peak energy after completely disordering the tilted superlattice is 39 meV. A theoretical model is used to simulate the change in band gap as a function of layer interdiffusion for several composition profiles. The profile that gives the best fit to the experimental data is chosen. The tilted superlattice composition profile is found to be sinusoidal, varying from Al_0.40Ga_0.60As to Al_0.60Ga_0.40As.     

Tuberculous meningitis: a 30-year review

Tuberculous meningitis remains an important illness that can be difficult to diagnose in a timely fashion and carries significant morbidity. We present a retrospective review of the cases of tuberculous meningitis diagnosed and treated at a single institution. Fifty-eight cases were identified and stratified according to stage of disease at presentation. Four patients (7%) died; three (5%) developed severe neurological sequelae. Poor outcomes were largely confined to cases presenting in an advanced stage and at the extremes of age. Corticosteroids were administered to 56 patients and may have contributed to the comparatively good outcome in these cases.     

Advanced thin-film silicon-on-sapphire technology: microwavecircuit applications

This paper reviews the prospects of thin-film silicon-on-sapphire (TFSOS) CMOS technology in microwave applications in the 1-5 GHz regime and beyond and presents the first demonstration of microwave integrated circuits based on this technology, MOSFET's optimized for microwave use, with 0.5-μm optically defined gate lengths and a T-gate structure, have f_t values of 25 GHz (14 GHz) and f_max values of 66 GHz (41 GHz) for n-channel (p-channel) devices and have noise figure values below 1 db at 2 GHz, some of the best reported performance characteristics of any silicon-based MOSFET's to date. On-chip spiral inductors exhibit quality factors above ten. Circuit performance compares favorably with that of other CMOS-based technologies and approach performance levels similar to those obtained by silicon bipolar technologies. The results demonstrate the significant potential of this technology for microwave applications