A comparison of partially acetylated nanocellulose,nanocrystalline cellulose,and nanoclay as fillers for high‐performance polylactide nanocomposites

Partially acetylated cellulose nanofibers (CNF) were chemically extracted from sisal fibers and the performance of those CNF as nanofillers for polylactide (PLA) for food packaging applications was evaluated. Three PLA nanocomposites; PLA/CNF (cellulose nanofibers), PLA/CNC (nanocrystalline cellulose), and PLA/C30B (Cloisite^TM 30B, an organically modified montmorillonite clay) were prepared and their properties were evaluated. It was found that CNF reinforced composites showed a larger decrease on oxygen transmission rate (OTR) than the clay‐based composites; (PLA/CNF 1% nanocomposite showed a 63% of reduction at 23°C and 50% RH while PLA/C30B 1% showed a 26% decrease) and similar behavior on terms of water vapor barrier properties with 46 and 43%, respectively of decrease on water vapor transmission rate at 23°C and 50% RH (relative humidity). In terms of mechanical and thermomechanical properties, CNF‐based nanocomposites showed better performance than clay‐based composites without affecting significantly the optical transparency. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43257.     

Effect of the annealing procedure and the molecular weight on the crystalline phase morphology and thermal properties of polylactide

The thermomechanical properties of poly(lactide) (PLA) are strongly related to its semicrystalline microstructure and morphology. Thermal annealing is a strategy to improve the crystallinity of PLA. However, the different techniques and specimen types needed for each kind of characterization could lead to misleading conclusions. In this work, annealed samples of three PLA grades with different molecular weights were studied by DSC, wide angle X‐ray scattering and polarized optical microscopy (POM) and the results are related to their thermomechanical and impact properties. Special focus is put on the POM results obtained by different approaches and the suitability of each of them to be related to the thermomechanical properties. By annealing medium molecular weight PLA specimens at 140 °C an important increase of the heat distortion temperature was obtained, which was not related to the spherulite size but to the combination of high crystallinity degree together with high α/α′ crystal type ratio. However, the impact properties of annealed PLA decreased with increase in the annealing temperature according to an increment in crystallinity and in the α/α′ crystal ratio. © 2019 Society of Chemical Industry     

Hyperphagia modifies FA profiles of plasma phospholipids,plasma FFA,and adipose tissue TAG

Hyperphagia was achieved by continuous intracerebroventricular infusion of a melanocortin receptor antagonist (HS024; Neosystem, Strasbourg, France) in rats. The effects of hyperphagia on FA composition and concentration of plasma phospholipids (PL), plasma FFA, and adipose tissue TAG were studied in rats for 8 d [short-term hyperphagia (STH); n=8], or 28 d [longterm hyperphagia (LTH); n=9]. The control rats were treated with artificial cerebrospinal fluid for 8 d (n=8) or 28 d (n=10). The rats were fed the same regular diet. In STH rats the plasma PL and fasting plasma FFA contained higher concentrations of saturated FA (SFA) and monounsaturated FA (MUFA), and plasma FFA contained lower n−6 PUFA than in the control rats. In LTH rats the plasma PL contained higher concentrations of SFA, MUFA, and n−3 PUFA and higher proportions of 16∶1n−7 and 18∶1n−9 at the expense of 18∶2n−6 than in the control rats. In LTH rats the abundant dietary intake of 18∶2n−6 did not enrich 18∶2n−6 of the plasma PL or adipose tissue TAG. In LTH rats the fasting plasma FFA contained more than twofold higher concentrations of SFA and MUFA, and higher proportions of 16∶1n−7 and 18∶1n−9 at the expense of 18∶2n−6 than in the control rats. This animal obesity model shows that LTH affects the FA composition and concentration of plasma PL, plasma FFA, and adipose tissue TAG, a result consistent with changes associated with increased risk of various diseases in humans. These results also demonstrate that LTH alters the FA composition of plasma PL and adipose tissue TAG in a way that does not reflect the FA composition of dietary fat.     

Fuel properties and emissions of soybean oil esters as diesel fuel

The effects of using blends of methyl and isopropyl esters of soybean oil with No. 2 diesel fuel were studied at several steady-state operating conditions in a four-cylinder turbocharged diesel engine. Fuel blends that contained 20, 50, and 70% methyl soyate and 20 and 50% isopropyl soyate were tested. Fuel properties, such as cetane number, also were investigated. Both methyl and isopropyl esters provided significant reductions in particulate emissions compared with No. 2 diesel fuel. A blend of 50% methyl ester and 50% No. 2 diesel fuel provided a reduction of 37% in the carbon portion of the particulates and 25% in the total particulates. The 50% blend of isopropyl ester and 50% No. 2 diesel fuel gave a 55% reduction in carbon and a 28% reduction in total particulate emissions. Emissions of carbon monoxide and unburned hydrocarbons also were reduced significantly. Oxides of nitrogen increased by 12%.     

Addition of carbon black NIR absorber to galvanised steel primer systems: Influence on NIR cure of polyester melamine topcoats and corrosion protection characteristics

Near infrared (NIR) is becoming a popular option for rapid cure of coatings in the coil coating industry particularly where fast line speeds are required. The technology has the potential to reduce the cure time of a 20 μm polyester coating on a galvanised steel substrate from around 30 s via conventional heating methods down to <10 s under the lamps. Previous work suggested that the ideal situation in this case is to have a topcoat which is slightly transparent to NIR and an absorbing substrate to heat the coating from the substrate outwards in a two stage process which separates solvent removal from cross linking and film formation. This can be taken further by tinting the primer layer with a pigment that absorbs in the NIR region. In this study spectroscopy was used to show that a coated steel system could appear white in the visible region because of the reflectance of TiO₂ but the NIR absorption could be altered by adding absorbing pigments such as carbon black. Lamp settings could be reduced by 20% to achieve equivalent cure with tinted primer systems. The potential degradation in corrosion protection afforded by carbon-black containing pigments at various loadings was assessed for model organic coatings applied to galvanised steel specimens. In situ scanning Kelvin probe studies showed that rates of corrosion-driven coating delamination by cathodic disbondment remained unchanged by pigment loadings of up to 3.5 wt%.     

Prediction of Power Consumption in a Mechanically Agitated Gassed Reactor in Viscous Batches

Volumetric mass transfer coefficient, power input, and gas holdup are key parameters in the design of mechanically agitated gas‐liquid contactors. Although the majority of industrial batches are of higher viscosity, reliable transport characteristics correlations for viscous batches are lacking in literature. These correlations are often based on the power input as the scale of energy dissipation. In order to develop reliable power input correlations, its measurements were carried out in a pilot‐plant vessel using multiple impellers of various types and diameters. Power input correlation shapes providing the best match with the comprehensive database are also expected to predict most precisely the impeller power in industrial‐scale vessels.     

Characterization of CVD Bonded Tyranno® Fibers Oxidized at High Temperatures

The oxidation of highly porous ceramic matrix composites (PCMCs) based on different Tyranno^® fibers has been analyzed by means of thermogravimetry and electron microscopy. Both uncoated fibers and PCMC materials exhibit parabolic kinetics between 900°C and 1250°C, these being faster for Ti‐doped than for Zr‐doped Tyranno fibers. Oxide layers in Ti‐doped fibers are porous and partially crystalline, whereas in Zr‐doped materials a significant fraction of relatively coarse β‐SiC grains is still found embedded in the amorphous silica matrix. On the other hand, the CVD‐SiC coatings exhibit higher oxidation rates from the outer surface than from the inner one, a phenomenon that has been associated not only with the more difficult access of oxygen to the inner face but also with the highly <111>  textured structure of these coatings, for which very different oxidation rates have been published for the inward and outward directions. Cracking phenomena observed above 1100°C for long dwelling times do not lead to an acceleration of the oxidation process, which could be due to the simultaneous crystallization of the amorphous silica layers.     

Solution Structure and Constrained Molecular Dynamics Study of Vitamin B12 Conjugates of the Anorectic Peptide PYY(3–36)

Vitamin B₁₂–peptide conjugates have considerable therapeutic potential through improved pharmacokinetic and/or pharmacodynamic properties imparted on the peptide upon covalent attachment to vitamin B₁₂ (B₁₂). There remains a lack of structural studies investigating the effects of B₁₂ conjugation on peptide secondary structure. Determining the solution structure of a B₁₂–peptide conjugate or conjugates and measuring functions of the conjugate(s) at the target peptide receptor may offer considerable insight concerning the future design of fully optimized conjugates. This methodology is especially useful in tandem with constrained molecular dynamics (MD) studies, such that predictions may be made about conjugates not yet synthesized. Focusing on two B₁₂ conjugates of the anorectic peptide PYY(3–36), one of which was previously demonstrated to have improved food intake reduction compared with PYY(3–36), we performed NMR structural analyses and used the information to conduct MD simulations. The study provides rare structural insight into vitamin B₁₂ conjugates and validates the fact that B₁₂ can be conjugated to a peptide without markedly affecting peptide secondary structure.     

Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites

Triaxial residual tensile stresses resulting after cooling a 3D woven composite from the curing temperature cause cracking in the resin pockets for weave architectures that have high through‐the‐thickness constraint. We show how curing cycle modifications can reduce the hydrostatic tensile stress generated by thermal mismatch during cooling of Hexcel RTM6 epoxy resin constrained in a quartz tube which simulates extreme constraint in a composite. The modified curing schedule consists of a high temperature cure to just before the glass transition, a lower temperature hold that takes the resin through the glass transition thereby freezing in the zero stress state, followed by high temperature cure to bring the resin to full conversion. We show that this process is sensitive to heating rates and can reduce the zero stress state of non‐toughened RTM6 resin to a temperature similar to a commercial rubber‐toughened resin, Cycom PR520. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43373.