Determination of absolute emission cross sections for electron-impact-induced line radiation in the vacuum ultraviolet

A method and an experimental setup have been developed for measuring absolute photoemission cross sections for electron-impact-induced line radiation in the vacuum ultraviolet (VUV). Unparalleled low uncertainties for the cross sections were achieved mainly from the use of the Berlin electron storage ring as a primary standard source in the VUV for the determination of the responsivity of the spectrometer-detector system used and from the use of a spinning rotor gauge as a secondary standard for the determination of the target gas density. As the first result we present a photoemission cross section for the Ar II 3s3p(6)(2)S(?)-3s(2)3p(5)(2)p?(3/2) transition at 91.98 nm for 2-keV electron-impact energy of 1.167 × 10(-18) cm(2) with a relative uncertainty of 4.4% (√3σ value). This low uncertainty demonstrates the suitability of the setup for further cross-section measurements.     

Composites of hydroxyapatite and bisphosphonate: properties and alveolar bone response

A composite was made by adsorption of the bisphosphonate [(3-dimethylamino-1-hydroxypropylidene)-1,1-bisphosphonate; dimethyl-APD] into an hydroxyapatite (HA) tube. Adsorbed dimethyl-APD did not change the bulk properties of the HA tube but the surface properties were altered. The amount of 0.1 mmol/L dimethyl-APD adsorbed into the HA tube was 0.78 ( ± 0.20) g after 4 weeks. The composite tube of HA and dimethyl-APD placed after extraction of teeth in the premolar regions of dogs were biocompatible, stable and bonded strongly and intimately to the alveolar bone. Although there was no bone resorption around the composite tubes, no conclusion can be drawn yet from this study as far as local inhibition of alveolar bone resorption is concerned.     

Optimization of correlated multi-response quality engineering by the upside-down normal loss function

Most of the published literature on robust design is basically concerned with a single response. However, the reality is that common industrial problems usually involve several quality characteristics, which are often correlated. Traditional approaches to multidimensional quality do not offer much information on how much better or worse a process is when finding optimal settings. Köksoy and Fan [Engineering Optimization 44 (8): 935–945] pointed out that the upside-down normal loss function provides a more reasonable risk assessment to the losses of being off-target in product engineering research. However, they only consider the single-response case. This article generalizes their idea to more than one response under possible correlations and co-movement effects of responses on the process loss. The response surface methodology has been adapted, estimating the expected multivariate upside-down normal loss function of a multidimensional system to find the optimal control factor settings of a given problem. The procedure and its merits are illustrated through an example.     

Valorisation of mango seed via extraction of starch: preliminary techno-economic analysis

Reducing environmental impacts and obtaining economic benefits based on utilisation of waste materials are drivers for the implementation of cleaner production policies and technologies in food processing industries. Starch is a very versatile material with a wide range of applications in the food, pharmaceutical, textile, paper, cosmetic and construction industries. In Ethiopia, starch is widely used in the textile industry. To meet the starch demand, the country imports approximately 45% of the starch used in the country. Consequently, it is imperative to find additional sources of starch that could substitute for the amount of starch that is currently being imported. Mango seeds, a waste material that is disposed of after consumption of mangos, were studied for potential use as an alternative resource for starch production. The results showed that starch extraction from mango seeds was facile and a good quality product was obtained. The present study is concerned with a techno-economic analysis for industrial production of starch from mango seeds. The study shows that extraction of starch from waste mango seeds is feasible: the project is financially viable with an accounting rate of return of 83% and a break-even analysis of 78% with a payback period of 2 years.     

Work-related low-back problems in nursing

This scientific literature review focuses on the relation between nursing work and low-back problems. Its aim was to estimate the risk of physical, psychosocial, and work organizational exposure factors that may lead to low-back problems. In addition this paper reviews and evaluates reported ergonomic intervention, with the object of decreasing the prevalence and incidence of low-back problems among nurses. A considerable number of studies of nursing staff has shown the connection between lifts and transfers of patients on one hand and low-back problems on the other. Factors in nursing work that may be significant in this connection are staff density and work satisfaction. In this review the single individual factor that was indisputably related to low-back problems was "history of back problems". Prevention programs do not show unequivocally positive results. There is a great need to carry out prospective studies with preventive programs.     

Mid-IR real-time monitoring of the carbocationic polymerization of isobutylene and styrene

The in-situ monitoring of the living carbocationic polymerization of isobutylene (IB) and styrene (St) with a fiber optic Attenuated Total Reflection (ATR) probe in the mid-IR "fingerprint" range is reported here for the first time. Monomer consumption was followed by the disappearance of the C=C stretching for both IB and St, and the C−H bending of the CH₃-group in IB. The formation of polyisobutylene (PIB) was also monitored by tracing the asymmetrical doublet characteristic of C−H bending of the t-butyl groups of the PIB. Conversion measurements by conventional off-line gravimetry correlated well with the new technique. Received: 27 August 1997/Revised version: 2 November 1997/Accepted: 20 November 1997     

Optical acceptance function of modified compound parabolic concentrators with linear corrugated reflectors

For reflective cylindrical concentrators the acceptance function, as determined in the meridian plane, remains constant for more oblique planes of incidence. However, if the reflective surface has a linear corrugated structure, it is possible to increase the acceptance in the meridian plane at the expense of reduced acceptance at a more oblique incidence. A ray-tracing study has been performed on the optical properties of troughlike compound parabolic concentrators (CPC's) with linear corrugated reflectors. Calculations of angular acceptance for a modified CPC with concentration C = x is presented. A possible application of this new concentrator is as a secondary concentrator for tracking parabolic troughs.     

New aspects of transversal1H-NMR relaxation in natural rubber vulcanizates

Summary Structure and dynamics of unfilled and carbon black filled natural rubber vulcanizates were investigated by means of transversal¹H-NMR-relaxation. A simple theoretical model including different motions in polymer network was extended by the discussion of an anisotropy parameter of segmental motion not only for the intercrosslink chains but also for the dangling ends. It makes characterization of the filling state of the network possible to approximate. The effect of increasing correlation times _f of the fast anisotropic local motion with reduction of the molecular mass of intercrosslink chains which was observed, but not cleared up in previous investigation is evidently smaller by using this modified model in accordance with the expectation of a local motion. The determined values of M_c are in good agreement with the results of fits by using the unmodified relaxation function.¹³C-NMR-spectra and stress-strain-experiments are leading in most cases to similar results, especially for M_c.     

Russian doll type cryogenic traps: improved design and isotope separation effects

An improved cryogenic trap for removing micromole quantities of condensables from gas mixtures is described. It is based on the so-called Russian doll design, with which extraordinary trapping efficiencies at flow rates of up to 10 L/min are obtained. The active element consists of one or more nested glass fiber thimbles. Despite the large fiber area, quantitative retrieval of condensed CO(2) is obtained. The new design is demountable and incorporates a heat exchange section; trapping efficiency depends little on the level of coolant, as has been tested for CO(2). When fractionation is induced by incomplete trapping, a small isotopic enrichment in (13)C occurs. It also has been discovered that when He is used as carrier gas, a gas chromatographic effect for CO occurs in Russian doll traps, accompanied by a large isotope separation, in which the elution sequence corresponds to the vapor pressure ratios of the isotopomers.     

Stability under vacuum of silicon trap detectors and their use as transfer instruments in cryogenic radiometry

The stability of the responsivity of trap detectors under vacuum has been studied by means of a special chamber designed for the test of photodetectors at low pressure. The first experiments at a wavelength of 647 nm show that the responsivity variations are smaller than the uncertainties of the measurements, approximately 3 parts in 10(5), when the detector operates successively in air, under vacuum, and then again in air. Calculations based on experiments with single windowless photodiodes indicate that the change in trap responsivity that is due to vacuum effects should be smaller than 1 part in 10(5), at least in the visible part of the wavelength range. This stability makes trap detectors suitable for cryogenic radiometry when one uses transfer detectors under vacuum.