Optical manipulation in combination with multiphoton microscopy for single-cell studies

We demonstrate how optical tweezers can be incorporated into a multiphoton microscope to achieve three-dimensional imaging of trapped cells. The optical tweezers, formed by a cw 1064 nm Nd:YVO4 laser, were used to trap live yeast cells in suspension while the 4',6-diamidino-2-phenylindole-stained nucleus was imaged in three dimensions by use of a pulsed femtosecond laser. The trapped cell was moved in the axial direction by changing the position of an external lens, which was used to control the divergence of the trapping laser beam. This gives us a simple method to use optical tweezers in the laser scanning of confocal and multiphoton microscopes. It is further shown that the same femtosecond laser as used for the multiphoton imaging could also be used as laser scissors, allowing us to drill holes in the membrane of trapped spermatozoa.     

Focal volume confinement by submicrometer-sized fluidic channels

Microfluidic channels with two lateral dimensions smaller than 1 microm were fabricated in fused silica for high-sensitivity single-molecule detection and fluorescence correlation spectroscopy. The effective observation volumes created by these channels are approximately 100 times smaller than observation volumes using conventional confocal optics and thus enable single-fluorophore detection at higher concentrations. Increased signal-to-noise ratios are also attained because the molecules are restricted to diffuse through the central regions of the excitation volume. Depending on the channel geometries, the effective dimensionality of diffusion is reduced, which is taken into account by simple solutions to diffusion models with boundaries. Driven by electrokinetic forces, analytes could be flowed rapidly through the observation volume, drastically increasing the rate of detection events and reducing data acquisition times. The statistical accuracy of single-molecule characterization is improved because all molecules are counted and contribute to the analysis. Velocities as high as 0.1 m/s were reached, corresponding to average molecular residence times in the observation volume as short as 10 micros. Applications of these nanofabricated devices for high-throughput, single-molecule detection in drug screening and genomic analysis are discussed.     

Terror management and religion: Evidence that intrinsic religiousness mitigates worldview defense following mortality salience.

Terror management theory suggests that people cope with awareness of death by investing in some kind of literal or symbolic immortality. Given the centrality of death transcendence beliefs in most religions, the authors hypothesized that religious beliefs play a protective role in managing terror of death. The authors report three studies suggesting that affirming intrinsic religiousness reduces both death-thought accessibility following mortality salience and the use of terror management defenses with regard to a secular belief system. Study 1 showed that after a naturally occurring reminder of mortality, people who scored high on intrinsic religiousness did not react with worldview defense, whereas people low on intrinsic religiousness did. Study 2 specified that intrinsic religious belief mitigated worldview defense only if participants had the opportunity to affirm their religious beliefs. Study 3 illustrated that affirmation of religious belief decreased death-thought accessibility following mortality salience only for those participants who scored high on the intrinsic religiousness scale. Taken as a whole, these results suggest that only those people who are intrinsically vested in their religion derive terror management benefits from religious beliefs. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Transformation Textures in As‐hot rolled TRIP Steels

The microstructures of TRIP steels finish‐rolled above and below the recrystallization‐stop temperature (T_nr) are compared. Here, the retained austenite grains are equiaxed or elongated, respectively, according to whether final rolling was carried out above or below the T_nr. The recrystallized austenite did not contain a sharp texture, the best defined component of which was the cube. The bainite that formed in this case was characterized by weak concentrations of the Goss and rotated Goss and a fairly strong concentration of the rotated cube. It also displayed the transformation products of a retained rolling fibre in the prior austenite. The deformed austenite contained the typical fcc rolling texture, where the copper is considerably more intense than the brass under these conditions. After transformation to bainite, the presence of a strong transformed copper component is evident, together with somewhat less intense contributions from the three transformed brass components. The data indicate that strong variant selection took place in the deformed austenite and that it was also present in the recrystallized material, but to a lesser extent. The latter displayed evidence of incomplete recrystallization in that the transformation texture included components obtained from both “recrystallized” and “deformed” austenite.     

Characterisation of the behaviour of particles in biofilters for pre-treatment of drinking water

Biofiltration of surface water was examined using granular activated carbon (GAC) and expanded clay (EC). Particle removal was 60-90%, measured by flow cytometry, which enabled discrimination between total- and autofluorescent particles (microalgae) in size ranges of 0.4-1 and 1-15 microm, and measured by on-line particle counting. Total particles were removed at a higher degree than autofluorescent particles. The biofilters were also challenged with 1 microm fluorescent microspheres with hydrophobic and hydrophilic surface characteristics and bacteriophages (Salmonella typhimurium 28B). Added microspheres were removed at 97-99% (hydrophobic) and 85-89% (hydrophilic) after 5 hydraulic residence times (HRT) and microspheres retained in the biofilter media were slowly detaching into the filtrate for a long time after the addition. Removal of bacteriophages (5 HRT) was considerably lower at 40-59%, and no long-lasting detachment was observed. A comparison of experimental data with theoretical predictions for removal of particles in clean granular media filters revealed a similar or higher removal of particles around 1 microm in size than predicted, while bacteriophages were removed at a similar or lesser extent than predicted. The results highlight the selectivity and dynamic behaviour of the particle removal processes and have implications for operation and microbial risk assessment of a treatment train with biofilters as pre-treatment.     

Time-resolved NIR spectroscopy for quantitative analysis of intact pharmaceutical tablets

Near-infrared (NIR) spectroscopy is a useful technique for quantitative measurements of intact tablets, but it suffers from limitations due to the fact that changes in the physical properties of a sample strongly affect the recorded spectrum. In this work, time-resolved transmission NIR spectroscopy was utilized to conduct quantitative measurements of intact tablets. The technique enables separation of the absorption properties of the sample from the scattering properties and can therefore handle changes of the physical parameters of the samples in a better way than conventional NIR transmission spectroscopy. The experiments were conducted using a pulsed Ti:sapphire laser coupled into a nonlinear photonic crystal fiber as light source. The light transmitted through the sample was measured by a time-resolving streak camera. A comparison of the results from the time-resolved technique with the results from conventional transmission NIR spectroscopy was made using tablets containing different concentrations of iron oxide and manufactured with different thicknesses. A PLS model made with data from the time-resolved technique predicted samples 5 times better than a PLS model made data from the conventional NIR transmission technique. Furthermore, an improvement to predict samples with physical properties outside those included in the calibration set was demonstrated.     

Integrated design and operation of a transparent optical network: a systematic approach to include physical layer awareness and cost function [Topics in Optical Communications]

The manner and exact timing of the evolution of the widely used DWDM infrastructure to a transparent optical network is judged on economic circumstances and network performance. In this context this article elaborates on a methodology developed within the Project 1ST NOBEL, for integrating cost functions and other design constraints into the planning of a DWDM network while considering this evolution perspective to a transparent optical network. This systematic approach builds upon the experience of static network design and is substantiated by specific examples in this article     

"Type A behavior pattern and emotion expression in younger and older adults": Correction.

Reports an error in the original article by C. Malatesta-Magai et al (Psychology & Aging, 1992[Dec], Vol 7[4], 551–561). A citation that was inadvertently omitted from the original article is provided. (The following abstract of this article originally appeared in record 1993-17168-001.) 80 younger (M?=?28 yrs) and 80 older (>50 yrs, M?=?69 yrs) Type A and Type B Ss were evaluated for Type A behavior pattern using the Structured Interview (SI) and given personality tests for anxiety, depression, anger, aggression, hostility, and anger-in–anger-out. Ss also underwent an emotion induction procedure. Videotapes of the emotion induction procedure (N?=?160) and the SI (N?=?80) were coded for facial expression of emotion. Type As did not differ from Bs on anxiety or depression but did on anger and aggression. Type As showed anger inhibition and anger bound to shame, as predicted by emotion socialization theory. The greatest number of differential effects were observed between age groups. Older individuals, in general, were more emotionally expressive than younger Ss across a range of emotions. Women appeared more conflicted about anger expression than men, and Type A women more so than Type A men. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The influence of training on the accuracy of roentgenographic cephalometric tracings (author's transl)

The accuracy in landmark identification and in the determination of angular and linear measurements used in cephalometric analysis on lateral head film were statistically evaluated comparing operators with different levels of competence. The observed magnitude of methodological error was depending on - prior experience of the investigator - individual radiographic anatomical knowledge - rigour of landmark definition and - accuracy of the tracing procedure. Considering these sources of error some of the variability in the present investigation might be avoided by systematic instructions. In order to decrease the variation in landmark location the reproducibility of some points must be further improved by redefining them in their verbal assessments. From an educational point of view the correlation between individual radiographic anatomical knowledge and the magnitude of error in cephalometric analysis should be considered with particular emphasis.