Modeling the thin-slab continuous-casting mold

A three-dimensional mathematical model has been developed to compute the thermomechanical state in the mold of thin-slab continuous casters. The thin-slab mold differs from those used in conventional slab casters in that the upper portion of the broad side walls defines a funnel-shaped chamber which allows the nozzle to be submerged into the liquid metal. The chamber converges with distance down the mold, reducing to the rectangular cross section of the finished casting near the mold exit. The new mold, along with casting speeds up to 6 m/min, allows slabs to be cast 50–60 mm thick, compared with 150 to 350 mm in conventional continuous slab casting. However, the mold shape and high casting speed lead to higher mold temperatures and shorter mold life than are found in conventional slab casters. In this article, we develop mathematical models of the process to determine the role of various process parameters in determining the mold life. Finite-element analysis is used to determine the temperatures in the mold and cast slab, and these data are then used in an elastic-viscoplastic analysis to investigate the deformation of the mold wall in service. Cyclic inelastic strains up to 1.75 Pct are found in a region below the meniscus along the funnel edge. These large strains result from the combination of locally high temperatures coupled with geometric restraint of the mold. The deformation leads to short mold life because of thermal fatigue cracking of the mold. The computed locations and time to failure of the mold in fatigue agree very well with observations of the appearance of mold surface cracks in an operating caster. The models are also used to develop an improved mold design. Formerly Research Assistant, Department of Mechanical and Industrial Engineering, University of Illinois, Urbana, IL     

News Media Use and Adolescents' Attitudes about Nuclear Issues: An American-Soviet Comparison

Both Soviet and American youth show a great concern about the possible effects of nuclear war, with heavy media users in both countries more optimistic, but the relation was stronger among Soviet students.     

Effect of Lateral Cracks on Fracture Toughness Determined by the Surface-Crack-in-Flexure Method

The surface-crack-in-flexure (SCF) method uses a Knoop indenter to create small, semielliptical surface precracks in beam specimens. Lateral cracks may interfere with the primary median crack and cause errors of up to 10% in determination of fracture toughness, particularly for materials for which the fracture toughness is ∼3 MPa·m^1/2 or less. Although the residual-stress-damage zone is ground or polished away by hand by removing 4.5–5 times the indentation depth, this amount may not be sufficient to completely remove the lateral cracks in low-fracture-toughness materials. A series of tests were conducted on sintered alpha silicon carbide with different amounts of material removed after indentation. Once the lateral cracks were fully removed, the SCF results concurred with single-edged-precracked-beam and chevron-notched-beam data collected in accordance with ASTM Designation C1421. A simple remedy for the SCF method is to examine the outer ground surface for remnants of lateral cracks before fracture and to remove more material if necessary.     

A sensing strategy for the reverse engineering of machined parts

The reverse engineering of machined parts requires sensing an existing part and producing a design (and perhaps a manufacturing process) for it. We have developed a reverse engineering system that has proven effective with a set of machined parts. This paper describes the system, presents some results, and discusses strategy for a new system.This work was supported by ARPA under ARO grant number DAAH04-93-G-0420, DARPA grant N00014-91-J-4123, NSF grant CDA 9024721, and a University of Utah Research Committee grant. All opinions, findings, conclusions or recommendations expressed in this document are those of the authors and do not necessarily reflect the views of the sponsoring agencies.     

The Rules of Beeping: Exchanging Messages Via Intentional "Missed Calls" on Mobile Phones

This article explores the practice of "beeping" or "missed calling" between mobile phone users, or calling a number and hanging up before the mobile's owner can pick up the call. Most beeps are requests to call back immediately, but they can also send a pre-negotiated instrumental message such as "pick me up now" or a relational sign, such as "I'm thinking of you." The practice itself is old, with roots in landline behaviors, but it has grown tremendously, particularly in the developing world. Based on interviews with small business owners and university students in Rwanda, the article identifies three kinds of beeps (callback, pre-negotiated instrumental, and relational) and the norms governing their use. It then assesses the significance of the practice using adaptive structuration theory. In concluding, the article contrasts beeping with SMS/text messaging, discusses its implications for increasing access to telecommunications services, and suggests paths for future research.     

THE IMPORTANCE OF NEUTRAL EXAMPLES FOR LEARNING SENTIMENT

Most research on learning to identify sentiment ignores "neutral" examples, learning only from examples of significant (positive or negative) polarity. We show that it is crucial to use neutral examples in learning polarity for a variety of reasons. Learning from negative and positive examples alone will not permit accurate classification of neutral examples. Moreover, the use of neutral training examples in learning facilitates better distinction between positive and negative examples.     

Validation of a limited sampling model to determine etoposide area under the curve

STUDY OBJECTIVE: To validate the utility of a previously reported 3-point limited sampling model (LSM) for determining etoposide area under the curve to infinity (AUC(infinity)). DESIGN: Secondary analysis of data from two clinical trials of etoposide. SETTING: University medical center clinical research center. PATIENTS: Thirty-four patients with different malignancies. INTERVENTIONS: Etoposide was administered as a 2-hour infusion to 34 patients. Serial plasma samples were drawn over 24 hours after the infusion and analyzed for etoposide by high-performance liquid chromatography. MEASUREMENTS AND MAIN RESULTS: The 3-point LSM AUC was compared with a 14-point actual AUC calculated by the linear trapezoidal rule. Actual and predicted AUC(infinity) by the LSM were highly correlated (r=0.97, p<0.0001). The LSM predictions had a mean absolute error of 10.9% (95% CI -14.1, -5.3) and a mean error of -9.7% (95% CI 6.9, 14.9). Nine patients with poor AUC(infinity) estimations by the LSM (error > 12%) tended to have abnormally low or high peak concentrations. CONCLUSION: Our findings suggest the development of more robust LSM using other techniques, such as pharmacostatistical models, that can accommodate a greater degree of pharmacokinetic variability.     

Projection status of calbindin- and parvalbumin-immunoreactive neurons in the superficial layers of the rat's superior colliculus

Immunocytochemistry and retrograde labeling were used to define the thalamic projections of calbindin- and parvalbumin-containing cells in superficial layers of the rat's superior colliculus (SC). Quantitative analysis revealed that 90.8 +/- 2.2% (mean +/- standard deviation) of the calbindin-immunoreactive neurons in the stratum griseum superficiale (SGS) projected to the dorsal lateral geniculate nucleus (LGNd) and that 91.3 +/- 4.3% of calbindin-immunoreactive neurons in the stratum opticum (SO) projected to the lateral posterior nucleus (LP). In contrast, only 17.3 +/- 2.5% of parvalbumin-immunoreactive neurons in the SGS were found to project to the LGNd and 16.5 +/- 3.1% of the parvalbumin-immunoreactive SO cells were retrogradely labeled after LP injections. Few of the parvalbumin-immunoreactive neurons in either the SGS (7.2 +/- 2.5%) or the SO (9.2 +/- 2.5%) were GABA positive. The retrograde-labeling results suggest that parvalbumin-immunoreactive neurons in the rat's SO and SGS may either be primarily interneurons or have descending projections, while calbindin-containing cells are primarily thalamic projection neurons. These results are consistent with data from other rodents, but almost exactly the opposite of data that have been reported for the cat for these same populations of SC projection neurons. Such interspecies differences raise questions regarding the functional importance of expressing one calcium-binding protein versus another in a specific neuronal population.     

Semantic priming in schizophrenia: An examination of spreading activation using word pronunciation and multiple SOAs.

Semantic priming in word pronunciation was examined at 5 stimulus onset asynchronies (SOAs) in 75 medicated and 25 unmedicated people with schizophrenia (SCZ) and in 10 depressed and 28 normal controls. At SOAs     

Lipoprotein(a) as a risk predictor for cardiac mortality in patients with acute coronary syndromes

AIMS: Raised lipoprotein(a) concentrations are considered to be a risk factor for atherothrombotic diseases. We examined whether baseline concentrations were a risk factor for an adverse outcome in patients admitted with acute coronary syndromes. METHODS AND RESULTS: Five hundred and nineteen patients admitted with suspected acute coronary syndromes were studied and followed prospectively for a median of 3 years. The prognostic significance of a baseline lipoprotein(a) concentration of > or = 30 mg x dl(-1) or lower for subsequent cardiac death was assessed in patients with myocardial infarction (266) and unstable angina (197) and compared with other variables in regression models. In patients with myocardial infarction, a baseline lipoprotein(a) concentration of > or =30 mg x dl(-1) was associated with a 62% increase in subsequent cardiac death compared to the lower concentration group (29.8% vs 18.6%, Log rank P=0.04). In a multivariate regression model a baseline lipoprotein(a) concentration of > or = 30 mg x dl(-1) retained its significance as an independent predictor of cardiac death (P=0.037). In patients with unstable angina, baseline concentrations of > or = 7.9 mg x dl(-1) were found to be significant predictors of cardiac death in univariate (P=0.021) and multivariate (P=0.035) regression models. CONCLUSION: Baseline lipoprotein(a) concentrations in patients admitted with acute coronary syndromes are associated with an increased risk of cardiac death. For patients with myocardial infarction a concentration of > or = 30 mg x dl(-1) appears appropriate as a risk discriminator; for patients admitted with unstable angina, however, much lower concentrations of lipoprotein(a) appear to be prognostically important.