Performance evaluation of OFDM and single‐carrier systems using frequency domain equalization and phase modulation

In this paper, we study the performance of the continuous phase modulation (CPM)‐based orthogonal frequency division multiplexing (CPM‐OFDM) system. Also, we propose a CPM‐based single‐carrier frequency domain equalization (CPM‐SC‐FDE) structure for broadband wireless communication systems. The proposed structure combines the advantages of the low complexity of SC‐FDE, in addition to exploiting the channel frequency diversity and the power efficiency of CPM. Both the CPM‐OFDM system and the proposed system are implemented with FDE to avoid the complexity of the equalization. Two types of frequency domain equalizers are considered and compared for performance evaluation of both systems; the zero forcing (ZF) equalizer and the minimum mean square error (MMSE) equalizer. Simulation experiments are performed for a variety of multipath fading channels. Simulation results show that the performance of the CPM‐based systems with multipath fading is better than their performance with single path fading. The performance over a multipath channel is at least 5 and 12 dB better than the performance over a single path channel, for the CPM‐OFDM system and the proposed CPM‐SC‐FDE system, respectively. The results also show that, when CPM is utilized in SC‐FDE systems, they can outperform CPM‐OFDM systems by about 5 dB. Copyright © 2010 John Wiley & Sons, Ltd.     

A smart exponential‐threshold‐linear backoff mechanism for IEEE 802.11 WLANs

Based on the standardized IEEE 802.11 Distributed Coordination Function (DCF) protocol, this paper proposes a new backoff mechanism, called Smart Exponential‐Threshold‐Linear (SETL) Backoff Mechanism, to enhance the system performance of contention‐based wireless networks. In the IEEE 802.11 DCF scheme, the smaller contention window (CW) will increase the collision probability, but the larger CW will delay the transmission. Hence, in the proposed SETL scheme, a threshold is set to determine the behavior of CW after each transmission. When the CW is smaller than the threshold, the CW of a competing station is exponentially adjusted to lower collision probability. Conversely, if the CW is larger than the threshold, the CW size is tuned linearly to prevent large transmission delay. Through extensive simulations, the results show that the proposed SETL scheme provides a better system throughput and lower collision rate in both light and heavy network loads than the related backoff algorithm schemes, including Binary Exponential Backoff (BEB), Exponential Increase Exponential Decrease (EIED) and Linear Increase Linear Decrease (LILD). Copyright © 2011 John Wiley & Sons, Ltd.     

Dielectric–Semiconductor Interface Limits Charge Carrier Motion at Elevated Temperatures and Large Carrier Densities in a High‐Mobility Organic Semiconductor

The fundamental nature of charge transport in highly ordered organic semiconductors is under constant debate. At cryogenic temperatures, effects within the semiconductor such as traps or the interaction of charge carriers with the insulating substrate (dipolar disorder or Fröhlich polarons) are known to limit carrier motion. In comparison, at elevated temperatures, where charge carrier mobility often also decreases as function of temperature, phonon scattering or dynamic disorder are frequently discussed mechanisms, but the exact microscopic cause that limits carrier motion is debated. Here, the mobility in the temperature range between 200 and 420 K as function of carrier density is explored in highly ordered perylene‐diimide from 3 to 9 nm thin films. It is observed that above room temperature increasing the gate electric field or decreasing the semiconducting film thickness leads to a suppression of the charge carrier mobility. Via X‐ray diffraction measurements at various temperatures and electric fields, changes of the thin film structure are excluded as cause for the observed mobility decrease. The experimental findings point toward scattering sites or traps at the semiconductor–dielectric interface, or in the dielectric as limiting factor for carrier mobility, whose role is usually neglected at elevated temperatures.     

Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics

Metallic nanofiber networks (MNFNs) are very promising for next‐generation flexible transparent electrodes (TEs) since they can retain outstanding optical and electrical properties during bending due to their ultralong and submicron profile. However, it is still challenging to achieve cost‐effective and high‐throughput fabrication of MNFNs with reliable and consistent performance. Here, a cost‐effective method is reported to fabricate high‐performance MNFN‐TEs via templated electrodeposition and imprint transfer. The fabricated electrodeposition template has a trilayer structure of glass/indium tin oxide/SiO₂ with nanotrenches in the insulating SiO₂ that can be utilized for repeated electrodeposition of the MNFNs, which are then transferred to flexible substrates. The fabricated TEs exhibit excellent optical transmittance (>84%) and electrical conductivity (<0.9 Ω sq^?1) and show desirable mechanical flexibility with a sheet resistance <2 Ω sq^?1 under a bending radius of 3 mm. Meanwhile, the MNFN‐TEs reproduced from the reusable template show consistent and reliable performance. Additionally, this template‐based method can realize the direct patterning of MNFN‐TEs with arbitrary conductive patterns by selective masking of the template. As a demonstration, a flexible dynamic electroluminescent display is fabricated using TEs made by this method, and the light‐emitting pattern is observable from both sides.     

An Intelligent Product Recommendation Model to Reflect the Recent Purchasing Patterns of Customers

Mobile Networks and Applications - This study suggests a new product recommendation model to reflect the recent purchasing patterns of customers. There are many methods to measure the similarity...     

Estimation of lung's air volume and its variations throughout respiratory CT image sequences

A respiratory image-sequence-segmentation technique is introduced based on a novel image-sequence analysis. The proposed technique is capable of segmenting the lung's air and its soft tissues followed by estimating the lung's air volume and its variations throughout the image sequence. Accurate estimation of these two parameters is very important in many applications related to lung disease diagnosis and treatment systems (e.g., brachytherapy), where the parameters are either the variables of interest themselves or are dependent/independent variables. The concept of the proposed technique involves using the image sequence's combined histogram to obtain a reasonable initial guess for the lung's air segmentation thresholds. This is followed by an optimization process to find the optimum threshold values that best satisfy the lung's air mass conservation and tissue incompressibility principles. These threshold values are consequently applied to estimate the lung's air volume and its variations throughout respiratory Computed Tomography (CT) image sequences. Ex vivo experiments were conducted on porcine left lungs in order to demonstrate the performance of the proposed technique. The proposed method was initially validated using a breath-hold CT image sequence with known air volumes inside the lung, where results show that the proposed technique outperforms single-histogram-based methods. This was followed by demonstrating the proposed technique's application in a 4-D-CT respiratory sequence, where the air volume inside the lung was unknown. Consistency of the obtained results in the latter experiment with tissue near incompressibility principle was validated. The results indicate a very good ability of the proposed method for estimating the lung's air volume and its variations in a respiratory image sequence.     

Quantification of surface damage of tool steels after EDM

The surface transformation and damage in AISI O1, A2, D2 and D6 tool steels after EDM were investigated. The results show that the recast layer is composed of two distinct layers: a topmost layer solidifying inwards from the specimen surface and an intermediate layer solidifying outwards from the base of the molten metal. The depth of surface cracks is found to correlate well with the thickness of the white layer, the latter being a layer of rapidly solidified material which, depending on the tool steel material, may consist either primarily of the topmost recast layer, or both the topmost and a large part of the intermediate recast layer. The density of surface cracks, however, correlates better with the thickness of the overall recast layer.

Attempts were made to quantify the depth of white (or damaged) layer with respect to the process parameters and surface roughness after EDM. It is found that with a fixed dielectric and flushing condition, the damaged layer correlates well with the pulse energy irrespective of thetool steel material. On the other hand, even though the thickness of the white layer increases with the surface roughness, the result shows considerably more scatter. Based on the present findings, ways of estimating the depth of the damaged layer produced by EDM are proposed.     

A comparison of congestion control and time slot algorithms in Internet transmission performance

The characteristics of TCP and UDP lead to different network transmission behaviours. TCP is responsive to network congestion whereas UDP is not. This paper proposes two mechanisms that operate at the source node to regulate TCP and UDP flows and provide a differential service for them. One is the congestion‐control mechanism, which uses congestion signal detected by TCP flows to regulate the flows at the source node. Another is the time‐slot mechanism, which assigns different number of time slots to flows to control their flow transmission. Based on the priority of each flow, different bandwidth proportions are allocated for each flow and differential services are provided. Simulation results show some insights of these two mechanisms. Moreover, we summarize the factors that may impact the performance of these two mechanisms. Copyright © 2001 John Wiley & Sons, Ltd.