Preparation and characterization of modified starch‐based plastic film reinforced with short pulp fiber. II. Mechanical properties

Native corn starch‐ and hydroxypropylated starch (HPS‐) based plastic films were prepared using the short pulp fiber as the reinforcement and the glycerol as the plasticizer. The results of tensile test showed that the strain and stress at break and elastic modulus increased with pulp content. With glycerol content, the strain at break increased considerably, but the breaking stress and elastic modulus decreased. And the stress–strain curves showed that the brittleness problem of films was overcome by the pulp, glycerol, and water content. The hydroxypropyl starch films showed results similar to those of the native starch films. The results of the three‐point bending test showed that maximum deflection, flexural strength, and specific work increased with pulp content, but the flexural modulus was the highest at a pulp content of 20%. And with the glycerol content, the maximum deflection and specific work of rupture increased, but the bending elastic modulus decreased. The hydroxypropyl starch films showed results similar to those of native starch films as far as the maximum deflection and flexural strength were concerned, but the bending elastic modulus and specific work of the hydroxypropyl starch films were considerably lower than those of starch films. So it was concluded that the flexibility of films was improved by the hydroxypropylation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2108–2117, 2003     

Characterization and preparation of new multiwall carbon nanotube/conducting polymer composites by in situ polymerization

Composites based on poly(diphenyl amine) (PDPA) and multiwall carbon nanotubes (MWNTs) were prepared by chemical oxidative polymerization through two different approaches: in situ polymerization and intimate mixing. In in situ polymerization, DPA was polymerized in the presence of dispersed MWNTs in sulfuric acid medium for different molar composition ratios of MWNT and DPA. Intimate mixing of synthesized PDPA with MWNT was also used for the preparation of PDPA/MWNT composites. Transmission electron microscopy revealed that the diameter of the tubular structure for the composite was 10–20 nm higher than the diameter of pure MWNT. Scanning electron microscopy provided evidence for the differences in the morphology between the MWNTs and the composites. Raman and Fourier transform IR (FTIR) spectroscopy, thermogravimetric analysis, X‐ray diffraction, and UV–visible spectroscopy were used to characterize the composites and reveal the differences in the molecular level interactions between the components in the composites. The Raman and FTIR spectral results revealed doping‐type molecular interactions and coordinate covalent‐type interactions between MWNT and PDPA in the composite prepared by in situ polymerization and intimate mixing, respectively. The backbone structure of PDPA in the composite decomposed at a higher temperature (>340°C) than the pristine PDPA (～300°C). This behavior also favored the molecular level interactions between MWNT and PDPA in the composite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3721–3729, 2006     

Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002     

Effects of Al:Si and (Al + Na):Si ratios on the properties of the international simple glass,part II: Structure

High-alumina containing high-level waste (HLW) will be vitrified at the Waste Treatment Plant at the Hanford Site. The resulting glasses, high in alumina, will have distinct composition-structure-property (C-S-P) relationships compared to previously studied HLW glasses. These C-S-P relationships determine the processability and product durability of glasses and therefore must be understood. The main purpose of this study is to understand the detailed structural changes caused by Al:Si and (Al + Na):Si substitutions in a simplified nuclear waste model glass (ISG, international simple glass) by combining experimental structural characterizations and molecular dynamics (MD) simulations. The structures of these two series of glasses were characterized by neutron total scattering and ²⁷Al, ²³Na, ²⁹Si, and ¹¹B solid-state nuclear magnetic resonance (NMR) spectroscopy. Additionally, MD simulations were used to generate atomistic structural models of the borosilicate glasses and simulation results were validated by the experimental structural data. Short-range (eg, bond distance, coordination number, etc) and medium-range (eg, oxygen speciation, network connectivity, polyhedral linkages) structural features of the borosilicate glasses were systematically investigated as a function of the degree of substitution. The results show that bond distance and coordination number of the cation-oxygen pairs are relatively insensitive to Al:Si and (Al + Na):Si substitutions with the exception of the B-O pair. Additionally, the Al:Si substitution results in an increase in tri-bridging oxygen species, whereas (Al + Na):Si substitution creates nonbridging oxygen species. Charge compensator preferences were found for Si-[NBO] (Na⁺), ^[3]B-[NBO] (Na⁺), ^[4]B (mostly Ca²⁺), ^[4]Al (nearly equally split Na⁺ and Ca²⁺), and ^[6]Zr (mostly Ca²⁺). The network former-BO-network former linkages preferences were also tabulated; Si-O-Al and Al-O-Al were preferred at the expense of lower Si-O-^[3]B and ^[3]B-O-^[3]B linkages. These results provide insights on the structural origins of property changes such as glass-transition temperature caused by the substitutions, providing a basis for future improvements of theoretical and computer simulation models.     

Effects of acid leaching treatment of soda-lime silicate glass on crack initiation and fracture

Water or acid soaking surface treatments have been shown to increase the mechanical strength of soda-lime silicate (SLS) glasses. This increase in strength has traditionally been attributed to effects related to residual stress or changes in fracture resistance. In this work, we report experimental data that cannot be explained based on the existing knowledge of glass surface mechanics. In dry environments, annealed and acid-leached SLS surfaces have comparable crack initiation stress and fracture stress as measured by Hertzian indentation and biaxial bending tests, respectively. Yet, in the presence of humidity, acid-leached surfaces have higher failure stress than the annealed surfaces. This apparent enhancement in the crack resistance of the acid-leached surface of SLS glass in humid environments supports the hypothesis that acid-leached surface chemistry can lower the transport kinetics of molecular water to critical flaws.     

A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

Rendering of HDR images to improve brightness discrimination

The impression of quality of images can be enhanced on a high dynamic range (HDR) displays. Generally, a conventional 8‐bit image can be processed to an HDR image by inverse tone mapping operators. Among the operators, brightness discrimination mapping by applying brightness adaptation model attempted to mimic the human visual system. In this paper, we use a brightness adaptation model to derive a brightness discrimination mapping algorithm for HDR displays. The proposed algorithm maximizes a function, which represents the local and global brightness discrimination range by exploiting characteristics of the human visual system. Enhancement of details is verified by visualizing HDR images from dark to bright regions. Improvement of dynamic range is quantified by measuring increased discrimination ratio.     

A secure image encryption scheme based on chaotic maps and affine transformation

Due to the interesting nonlinear dynamic properties of chaotic maps, recently chaos-based encryption algorithms have gained much attention in cryptographic communities. However, many encryption schemes do not fulfil the minimum key space requirement, which is an essential concern in many secure data applications. In this paper, an efficient chaos-based image encryption scheme with higher key space is presented. Even with a single round of encryption, a significantly larger key space can be achieved. The proposed scheme removes correlation among image pixels via random chaotic sequences, simply by XOR and addition operations. In order to resist against numerous attacks, we apply the affine transformation to get the final ciphertext image. The security of the proposed scheme is proved through histogram, contrast, PSNR, entropy, correlation, key space, key sensitivity and differential attack analysis. Many significant properties of chaotic maps, sensitivity to initial condition and control parameters, structure and attack complexity, make the anticipated scheme very reliable, practical and robust in various secure communication applications.     

A study on effects of security risks on acceptance of enterprise cloud service: moderating of employment and non-employment using PLS multiple group analysis

This paper analyzed the effects of security risk factors fit for cloud computing paradigm on the acceptance of enterprise cloud service with intent to illuminate the factors for vitalizing the adoption of corporate cloud services in the future. The acceptance intention was set as a dependent variable. Independent variables were set in reference to the technology acceptance theory. Security risks were categorized into compliance risk, information leakage risk, troubleshooting risk and service discontinuation risk to design a model for analysis.     

Fast response fringe‐field switching mode liquid crystal development for shutter glass 3D

A type of fast response time (RT) liquid crystal (LC) was developed to adopt in fringe‐field switching (FFS) mode for shutter glass 3D display device, the average gray to gray level (GTG) RT can reduce from 7.43 ms to 4.48 ms at a refreshing rate of 60 Hz, and the transmittance can increase by 15.4% compared with conventional LC based on the same cell gap. Meanwhile, the correlation among optical efficiency, correlative color temperature (CCT) of module and retardation of LC for FFS mode was studied. Transmittance is proportional to the retardation of LC; however, the CCT is inversely proportional to the retardation. The fast response LC can keep almost the original optical efficiency and CCT.