A generalized method for correcting instrument spreading in gel permeation chromatography

A general method of chromatogram correction for skewed instrument spreading in gel permeation chromatography is presented. The correction method is so general that there is no restriction on the shape of the spreading function. It admits nonsymmetric, non-Gaussian as well as nonconvolution type. Aspects of solution techniques are discussed and an illustrative example is given to elucidate the method.     

电石包装桶中乙炔气处理简述

电石在远距离运输过程中，受潮湿，生成乙炔气，遇明火燃烧或发生爆炸。对从业人员造成巨大危害。如何处理包装桶中的乙炔气成为电石产业的物流运输瓶颈。我公司在原来包二化比较实用的氮气置换基础上，逐渐形成了成熟的可使200KG大桶和100KG小桶中各种粒度电石包装桶中乙炔气浓度有效降低的出口电石质量控制体系。     

Studies on multilayer film coextrusion III. The rheology of blown film coextrusion

Multilayer blown film coextrusion was studied, both experimentally and theoretically. For the experimental study, an annular die with a feed-port system was designed and multilayer blown films were produced by rotating the inner mandrel with a one horsepower variable-speed drive at speeds from nearly 2 to 6 rpm, and by inflating the tubular molten film with air. The die has 16 feed slots and melt pressure transducers are mounted along the axial direction of the outer wall of the annular flow channel. The transducers were used to determine the pressure gradient in the annular flow channel, which then permitted determination of the reduction in pressure drop when different combinations of two polymer systems were coextruded. Polymers used for b own film coextrusion were: (1) low-density polyethylene with ethylene-vinyl acetate; (2) low-density polyethylene with high-density polyethylene; (3) low-density polyethylene with polypropylene; (4) high-density polyethylene with ethylene-vinyl acetate. For the theoretical study, stratified helical flow was analyzed using a power-law non-Newtonian model. A computational procedure was developed to predict the number of layers, layer thickness, and the volumetric flow rate as functions of certain processing variables (namely, the pressure drop in the die, and the angular speed of rotation of the inner mandrel of the die) and the rheological parameters of the individual polymers concerned. Comparison was made of the theoretical prediction of volumetric flow rate with experimental ones. Some representative results are presented of the theoretically predicted axial and angular velocity distributions, shear stress profiles, and shear rate profiles.     

宽温耐硫变换催化剂制备工艺研究

利用催化剂活性评价、催化剂活性组分含量测定、Ｘ—光衍射等手段，研究了共浸法制备宽温耐硫变换催化剂制备工艺过程中载体氧化铝的吸水率、浸渍条件、煅烧温度等对催化剂性能的影响。     

Precise localization of eye centers with multiple cues

Automatic detection and precise localization of human eye centers are the essential processes in photo related multimedia applications. Since eye center points are used as reference base points for further intelligent processing, precise eye center localization is very important. In face recognition the accuracy of localization of eye centers directly influences the identification accuracy. A multiple stage approach with multiple cues for detection and precise localization of eye centers is presented in this paper. Multiple scopes searching strategy is used for correctly extracting eye patch images from the background. Dedicated gradient based features and curvelet based features are constructed and used for comprehensively revealing the intensity distribution characteristics and the edge based texture around eye centers. A rebuilt score calculation mechanism is proposed and the rebuilt scores are used as a specific measurement index reflecting the matching accuracy. The final localizations of eye centers are determined with integrating the gradient based scores and curvelet based scores. The experiment results testing on public face datasets show that the localization accuracy of proposed approach outperforms the accuracy with other state of the art methods.     

Strain-Induced Deformation in Magnesia–Alumina Layered Composites

Ceramic beams are induced in situ to form complex shapes at elevated temperature without the application of an external stress. This process has been demonstrated for thin alumina substrates coated with a layer of magnesia. The internal strain causing the substrates to deform at elevated temperature arises as a consequence of strain mismatch accompanying the penetration of the coating into the substrate. The magnitude of the deformation depends on the amount of coating applied, on the thickness of the substrate, on the density of the substrate, and on the temperature. During exposure of the beams to elevated temperature, the magnesia coating reacts with the alumina substrate to form the spinel phase; the resulting volume change accompanying the phase transformation is likely the predominant driving force for deformation.     

Crystallization studies of semi-crystalline polymers under oscillatory shear using the rheometrics mechanical spectrometer

A method has been developed on the Rheometrics mechanical spectrometer using the eccentric rotating disks mode to study the crystallization kinetics of different semi-crystalline polymers (polyethylene, polypropylene, poly(butylene terephthalate) and Nylon 11) under oscillatory shear. Dynamic shear moduli (storage G′ and loss G″), loss tangent (tan δ), and dynamic viscosity (η′) were simultaneously, monitored during the crystallization process. The onset and completion of crystallization were characterized by the initial rise and final levelling off of G′, while the peak time, of crystallization (t_p) is calculated from the time elapsed between the onset and peak of crystallization which is indicated by the G″ or η′ maximum. In the case of polypropylene, going from a low frequency of ?0.1 rad/s, to higher frequencies of up to 10 rad/s, there is a monotonic decrease in peak time of crystallization (t_p) together with a progressive decrease in spherulitic morphology. The observed acceleration in crystallization is due predominantly to the increase in nucleation rate and orientation of chains in melt crystalline aggregate. The progressive disappearance of the spherulitic morphology is attributed to the disruption of the spherulite superstructure at higher frequencies of shear.     

Ozone-Based Advanced Oxidation Processes for the Decomposition of N-Methyl-2-Pyrolidone in Aqueous Medium

The present study investigates the decomposition of N-Methyl-2-Pyrolidone (NMP) using conventional ozonation (O₃), ozonation in the presence of UV light (UV/O₃), hydrogen peroxide (O₃/H₂O₂), and UV/H₂O₂ processes under various experimental conditions. The influence of solution pH, ozone gas flow dosage, and H₂O₂ dosage on the degradation of NMP was studied. All ozone-based advanced oxidation processes (AOPs) were efficient in alkaline medium, whereas the UV/H₂O₂ process was efficient in acidic medium. Increasing ozone gas flow dosage would accelerate the degradation of NMP up to certain level beyond which no positive effect was observed in ozonation as well as UV light enhanced ozonation processes. Hydrogen peroxide dosage strongly influenced the degradation of NMP and a hydrogen peroxide dosage of 0.75 g/L and 0.5 g/L was found to be the optimum dosage in UV/H₂O₂ and O₃/H₂O₂ processes, respectively. The UV/O₃ process was most efficient in TOC removal. Overall it can be concluded that ozonation and ozone-based AOPs are promising processes for an efficient removal of NMP in wastewater.     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.