Scaling laws and internal structure for characterizing electrospun poly[(R)-3-hydroxybutyrate] fibers

Using chloroform/dimethylformamide (CF/DMF) co-solvent, electrospinning of poly[(R)-3-hydroxybutyrate] (PHB) solutions was carried out at ambient temperature. The effects of the applied voltage (V), flow-rate (Q), and solution viscoelastic properties on the Taylor cone, electrified jet, and fiber morphology were investigated. In addition, the electric field developed by the needle-plate electrode configuration was calculated using a finite element analysis to reveal the tip-to-collector (H) effect. Among the processing parameters (V, Q and H), it was found that Q played a key role in determining the jet diameter (d_j) and electrospun fiber diameter (d_f), and scaling laws existed between them, i.e., d_j-Q^0.61 and d_f-Q^0.33. The diameter reduction ratios of D_o/d_j (D_o is the needle diameter) and d_j/d_f were measured as 50-120 and 5-10, respectively; it suggested that major jet stretching took place in the straight electrified jet region, and further chain orientation could be gained by the subsequent process of jet whipping. By changing PHB concentrations from 5 to 15 wt%, the solution viscosity (η_o) was increased from 100 to 4900 cP, whereas the surface tension and solution conductivity remained unchanged; it provided a good model solution to exclusively reveal the η_o effect on the electrospinning process. Our results showed that the η_o-dependence of d_j and d_f also followed simple scaling laws: d_j-η_o^0.06, and d_f-η_o^0.39, with a prefactor depending on the processing variables, mainly the flow-rate. Regardless of the PHB concentrations used, the obtained PHB fibers showed a similar crystallinity fraction of ca. 0.63 and possession of major α-crystals together with a small amount of β-crystals with zigzag chain conformation.     

Pioneering e-supply chain integration in semiconductor industry: a case study

Taiwan Semiconductor Manufacturing Company (TSMC) is the largest semiconductor foundry in the world. Advanced Semiconductor Engineering Inc. (ASE) is the world’s leader in semiconductor assembly and testing. From 1998 to 2004, the two companies completed electronic integration of 11 key business processes through the Internet. The result is a seamless interface between TSMC, ASE and their joint customers. They can now obtain accurate, timely information on their product status and respond appropriately when needed. While the direct economic benefits are estimated to be around US$ 10 million through productivity increase over a total investment of about US$ 2 million, the indirect benefits of this initiative could be on the order of US $100 million if the joint customers’ benefits are considered. In collaboration with the RosettaNet organization, TSMC and ASE leveraged their pioneering experiences to define three data exchange standards which can then be widely adopted in the semiconductor industry. This case study is a demonstration of how two leading companies in their respective fields can join forces to make a difference in creating value for the entire semiconductor industry, which in turn benefits society at large. With the momentum continuing to build and the sphere of influence continuing to expand, it is anticipated that TSMC, ASE and the entire sector will upgrade their competitiveness in terms of cost, quality, responsiveness and customer orientation.     

Construction of a prediction model for the structural stability of a surface grinder using backpropagation neural network

Learning and prediction capability of the backpropagation neural network (BPNN) have been used to build the prediction model for the structural stability of a surface grinder. The Lagrange energy method is applied to derive the dynamic equation of the lumped parameter model of the surface grinder. The major factors influencing the structural stability of the system can be determined after the ratio of kinetic energy of the sub-structure and the ratio of potential energy of the sub-structure interface are obtained. An orthogonal rotatable central composite design is adopted to dispose the treatment combinations of the major factors. The BPNN model is constructed by the treatment combinations of the training patterns and verified by the treatment combinations of the test patterns. In this paper, a 3-layer BPNN model with a 10-neuron hidden layer which converged after 4,072 learning cycles is selected to predict the structural stability of a surface grinder within the planned ranges. The percentage residuals of both training patterns and test patterns are all within 3.41%, thus the prediction accuracy of the BPNN model is excellent so that the engineering demands are well satisfied.     

New multifunction filter using an inverting CCII and a voltagefollower

A new multifunction filter using minimum components is presented. This filter which possesses single input and four outputs can simultaneously generate second-order highpass, bandpass, and lowpass filtering functions at individual output terminals. The filter has the following merits; it uses only two grounded capacitors which makes it suitable for integrated circuit implementation, no matching condition is required, offering multifunction outputs and has low passive and active sensitivities. Experimental results agree very well with the theoretical result     

ID-based non-interactive zero-knowledge proof system based on one-out-of-two non-interactive oblivious transfer

In this paper, we propose an ID-based non-interactive zero-knowledge proof system based on the 1-out-of-2 noninteractive oblivious transfer protocol. This zero-knowledge proof system is secure against a newly discovered cheating attack.     

Spray deposition process study of SnO2silicon solar cells using orthogonal experimental design

With the “orthogonal experimental design” (OED), the dependence of conductivity and transparency of tin oxide films and open circuit voltage V_oc of SIS solar cells on the spray deposition process factors was studied. The OED technique was found to be a powerful method for realizing the best factor combination. Using OED, curves were obtained which clearly depict the effects of each factor on the SIS characteristics. The results of the experiments also illustrate exactly which variation in fabrication technique most affects the sheet resistance, V_oc, and film transparency. Under the optimal combination of conditions, a thin film doped with NH₄F was obtained, with about 90% transmission and a sheet resistance of about 80 Ω/□, along with an SIS structure with a V_oc of about 0.61 V.     

Projection methods in flexible multibody dynamics. Part I: Kinematics

In this paper a recursive projection method for the dynamic analysis of open-loop mechanical systems that consist of a set of interconnected deformable bodies is presented. The configuration of each body in the system is identified using a coupled set of reference and elastic co-ordinates. The absolute velocities and accelerations of leaf or child bodies in the open-loop system are expressed in terms of the absolute velocities and accelerations of the parent bodies and the time derivatives of the relative co-ordinates of the joints between the bodies. The dynamic differential equations of motion are developed for each link using the generalized Newton-Euler equations. The relationship between the actual joint reactions and the generalized forces combined with the kinematic relationships and the generalized Newton-Euler equations are used to develop a system of loosely coupled equations which has a sparse matrix structure. Using matrix partitioning and recursive projection techniques based on optimal block factorization an efficient solution for the system accelerations and joint reaction forces is obtained. This solution technique yields a much smaller operations count and can more effectively exploit vectorization and parallel processing. It also allows a systematic procedure for decoupling the joint and elastic accelerations.     

Stress relaxation in the interface between creep particle and elastic matrix-strengthening mechanism

The effect of a power law creep particle on interface behavior between the particle and elastic matrix is investigated by stress analysis. Using the results obtained through the stress analysis, the forces due to interaction of an applied stress and stress concentration with an edge dislocation are determined. The direct interaction between the edge dislocation and the creeping particle is studied under fully relaxed stress conditions. Through the investigation the following results are derived. Stress relaxation in the interface can be caused by power law creep along or by diffusion, or a combination of both mechanisms. The degree of stress relaxation caused by diffusion can be defined in terms of the relaxation time for both boundary diffusion and volume diffusion. The amount of stress relaxation caused by the power law creep particle is characterized by the quantity ₂ which is a function of Γ₀ = 2(1/√3)^{1 + m} × (σ_∞/2μ)^m(σ₀/σ_∞t^m), where m is strain rate hardening exponent, σ_∞ is applied stress, μ is the shear modulus, σ₀ is the material constant of the power law creep particle, and t is elapsed time. The value ₂ = 1.0 corresponds to the fully relaxed condition and ₂ = −0.6 corresponds to the initial state. The time to reach a fully relaxed condition is very sensitive to the strain rate exponent, with the smaller m values leading to longer times. The stress state of complete relaxation in the elastic matrix is equivalent to the solution of a void in an elastic matrix superposed on the solution of positive surface traction on the void. This result is identical to that obtained by Srolovitz et al. [Acta. Metall.32, 1979 (1984)]. When the stress is completely relaxed in the particle, all stress components (σ_r, σ_θand σ_rθ) are relaxed, while in the matrix relaxations are observed only for σ_rand σ_θ. The critical resolved shear stress and critical stress to climb the dislocation in the neighborhood of the particle exceed the Orowan stress. Also, the particle attracts the dislocation. Therefore the strengthening of a power law creep particle in an elastic matrix is caused by the Orowan mechanism and by attraction of the dislocation.     

Orderly stimulation of skeletal muscle motor units with tripolarnerve cuff electrode

An electrical nerve stimulation technique, using single tripolar electrode, was shown to be capable of recruiting motor units according to their size, while allowing simultaneous but independent control of firing rate in the active units. Test paradigms consisting of established fundamental physiological concepts of soleus-gastrocnemius architecture, motor units conduction velocity, firing rate behavior of motor units of different sizes, and their susceptibility to fatigue were employed to validate the technique and demonstrate its utility as a basic and applied research tool.     

High-performance simulations of turbulent boundary layer flow using Intel Xeon Phi many-core processors

The Journal of Supercomputing - Direct numerical simulations (DNS) of turbulent flows have increasing importance because they not only provide fundamental understanding of turbulent flows but also...