Research on quality improvement of the cross section cut by abrasive water jet based on secondary cutting

A manufacturing system comprises production processes and building services, both of which are supplied by different energy carriers as well as raw materials and water. These resources interact according to complex relationships and are converted into products for sale and waste flows. Holistic resource accounting allows the analyst to consider the dynamic relationships between these components, including the strong interdependence between energy and water, which has been called the energy-water nexus. Exergy analysis is a method that accounts for mass and both the quantity and quality of energy, while allowing analysis on a common basis, and for this reason, it is used increasingly to analyse resource consumption in manufacturing systems; however, it has rarely been used to consider water flows alongside energy and material flows. The main contribution of this paper is the presentation of modelling water flows in terms of exergy in the context of sustainable manufacturing. Using this technique in combination with previously developed exergy-based methods, the result is a truly holistic resource accounting method for factories based on exergy analysis that incorporates water flows. The method is illustrated using a case study of a food factory in which a 4.1% reduction in resource use is shown to be possible by employing anaerobic digester in an effluent water treatment process. The benefits of this technology option would have been underestimated compared to the benefits of waste heat capture if an analysis based on mass and energy balances alone had been used. The scientific value of this paper is the demonstration of the relatively high exergy content of effluent flows, which should therefore be regarded as potentially valuable resources. The analytical method presented is therefore of value to a wide range of industries beyond the food industry.     

Post-processor development for a turning and milling composite machine tool

The accomplishment of a turning and five-axis milling in only one setup is extremely useful and is possible on a turning and milling composite machine tool. In this work, we present a control algorithm and develop a post-processor for this machine, which has six linear and three rotary axes. To calculate a generalized kinematics model, coordinate systems are established by analyzing the basic kinematic chain relation of the turning and milling composite machine tool. The two vectors, which control the motions of the cutter contact workpiece, are simultaneously transformed to provide the algorithms of the rotary angles and motion coordinate. A special post-processor written in JAVA language is developed according to the proposed algorithm. To evaluate the effectiveness and accuracy of the developed post-processor, a specimen (blade) is used in the cutting simulation and real machining experiment. Experimental results showed the effectiveness and accuracy of the proposed algorithm. Furthermore, Compatibility is improved by adding new functions such as change of target machine, cutter location data change, workpiece origin offset, and cutting feed rate control.     

Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.     

Tribological Characteristics of Aqueous Graphene Oxide,Graphitic Carbon Nitride,and Their Mixed Suspensions

The tribological performance of graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and their mixed (g-C₃N₄/GO) aqueous suspensions was investigated. The 0.06 wt% GO, 0.06 wt% g-C₃N₄, and 0.06 wt% 1:1 g-C₃N₄/GO suspensions reduced the coefficient of friction (COF) by 37, 26 and 37% and wear mark radius by 19.1, 16.0 and 19.6%, respectively, in comparison with water. Pure g-C₃N₄ and GO suspensions showed unstable lubrication in the tests with relatively high loads and speeds, while the g-C₃N₄/GO mixed suspension had superior tribological performance in all tested conditions. This is because in the mixed suspension g-C₃N₄ agglomerates became smaller, and GO nanosheets exhibited fewer wrinkles and less stacking, which enabled the formation of a layer of tribo-composite film. As a result, the friction, wear and tribo-corrosion were reduced during sliding.     

Lyapunov exponent of friction-induced vibration under smooth friction curve

This paper studies the nonlinear behavior of the friction-induced vibration by using spring-mass model subject to the smooth frictionvelocity curve. The nonlinearity and instability of the friction may produce the chaotic vibration depending on the friction curve. In order to show this, the Lyapunov exponents are calculated for a variety of the slope and magnitude in the smooth friction curve. In turn, the dependency of the friction curve on the chaotic attractor is illustrated.     

Experimental study on the life prediction of servo motors through model-based system degradation assessment and accelerated degradation testing

The advent of smart factories has resulted in the frequent utilization of industrial robots within factories to increase production automation and efficiency. Due to the increase in the number of industrial robots, it has become more important to prevent any unexpected breakdowns of the factory. As a result, the lifespan prediction of machinery has become a crucial factor because such failures can be directly associated with factory productivity resulting in significant losses. Most of the failures occur within one of the core components of the robot arm, the servo motor, and thus we will focus on the analysis of the servo motor in this study. However, sensor attachment to such equipment is considered difficult due to the dynamic movement of the robot arm, meaning that internal instrumentation should be utilized during analysis. In addition, no definite measure to determine the degradation of the motor exists, and thus a new degradation index is proposed in this study. Therefore, in this study, the lifespan of the servo motor will be estimated through accelerated degradation testing methods based on a new system degradation assessment method, which estimates the fault of the system using observer-based residuals with encoder data obtained from internal instrumentation.     

A study on piezoelectric energy harvester using kinetic energy of ocean

Electricity generation through fossil fuels has caused environmental pollution. Accordingly, research on new renewable energy (solar, wind, geothermal heat, etc.) to replace fossil fuels and solve this problem is in progress. These devices can consistently generate power. However, they have several drawbacks, such as high installation costs and limitations in possible set-up environments. Therefore, the piezoelectric harvesting technology, which is able to overcome the limitations of existing energy technologies, is actively being studied. The piezoelectric harvesting technology uses the piezoelectric effect, which occurs in crystals that generate voltage when stress is applied. Its advantages include a wider installation base and a lower technological cost. This study investigated a piezoelectric energy-harvesting device based on constant wave motion. This device can harvest power in a constant turbulent flow in the middle of the sea. The components of the device are circuitry, percussion bar, triple layer piezoelectric bender, bearing and rudder. A multiphysical analysis coupled with the structure and piezoelectric elements was also conducted to estimate the device performance. The analysis accuracy was improved by applying the impact energy to the bender calculated based on the shape of the wave in the East Sea. The proposed device’s performance was finally confirmed by experiments.     

Preface

Evolutionary Algorithms(EAs)mimicking the principles of natural evolution can be used as powerful search and optimization methods.These Evolutionary Optimization methods are superior to traditional optimization methods especially in situations where gradient information is not readily available.EAs are generic and robust optimization methods since they do not make any assumption about the underlying search space.This is clearly evident by the success of EAs in a diverse range of real-world applications.T...     

Adaptive river segmentation in SAR images

There is difficulty for distinguishing of river and shadow in Synthetic Aperture Radar (SAR) images. A method of river segmentation in SAR images based on wavelet energy and gradient is proposed in this paper. It mainly includes two algorithms: coarse segmentation and refined segmentation. Firstly, The river regions are coarsely segmented by the wavelet energy feature,and then refined segmented accurately by the gradient threshold which is got adaptively. The experimental results show the validity of the method, which provides a good foundation for targets detection above the river.     

Anwendung der Methode der symmetrischen Komponenten auf unsymmetrische Stä;nderschaltungen von Drehstromasynchronmotoren

Zusammenfassung Alle hier aufgeführten Beispiele zeigen, da\ es möglich ist, selbst verhä;ltnismä;\ig verwickelte Schaltungen so zu behandeln, ohne da\ der physikalische Zusammenhang durch rechnerische Schwierigkeiten verdeckt wird. Es sei zum Abschlu\ noch einmal hervorgehoben, da\ es sich bei allen Schaltungen um solche mit symmetrisch gewickelten und geschalteten Lä;uferphasen handelte. Die bekannte einachsige Lä;uferschaltung lä;\t sich also in dieser einfachen Weise nicht berechnen!