Update on the pharmacology of Spirulina (Arthrospira), an unconventional food

Spirulina (Arthrospira), a filamentous, unicellular alga, is a cyanobacterium grown in certain countries as food for human and animal consumption. It is also used to derive additives in pharmaceuticals and foods. This alga is a rich source of proteins, vitamins, amino acids, minerals, and other nutrients. Its main use, therefore, is as a food supplement. Over the last few years, however, it has been found to have many additional pharmacological properties. Thus, it has been experimentally proven, in vivo and in vitro that it is effective to treat certain allergies, anemia, cancer, hepatotoxicity, viral and cardiovascular diseases, hyperglycemia, hyperlipidemia, immunodeficiency, and inflammatory processes, among others. Several of these activities are attributed to Spirulina itself or to some of its components including fatty acids omega-3 or omega-6, beta-carotene, alpha-tocopherol, phycocyanin, phenol compounds, and a recently isolated complex, Ca-Spirulan (Ca-SP). This paper aims to update and critically review the results published over the last few years with regards to these properties. The conclusion is that even if this cyanobacterium has been one of the most extensively studied from the chemical, pharmacological and toxicological points of view, it is still necessary to expand the research in order to have more consistent data for its possible use in human beings.     

Synthesis and Polymerization of Cationic bis(cyclopentadienyliron)arene Complexes Containing Arylazo Dyes

The synthesis of the title complexes was achieved via the reaction of -p-dichlorobenzene- -cyclopentadienyliron cations with 4,4′-bis(4-hydroxyphenyl)valeric acid to produce the diiron complexes which were then reacted with a number of arylazo dyes to give cationic bis(cyclopentadienyliron)arene complexes containing the arylazo dyes. These iron-containing monomers were subsequently polymerized via nucleophilic aromatic substitution using 1,8-octanedithiol, 4,4′-thiobisbenzenethiol, or bisphenol A to produce the desired coloured cationic organoiron polymers. The weight – average molecular weights were estimated to range from 11,800 to 31,600. UV–vis studies conducted in dimethylformamide (DMF) showed that the metallated polymers exhibited of 412–491 nm. Addition of HCl to the polymer solution caused a bathochromic shift into the range of 515–530 nm. Thermogravimetric analysis (TGA) revealed that the iron moieties were cleaved between 205 and 248 °C while the polyether/thioether backbone degraded between 380 and 613 °C. Differential scanning calorimetry (DSC) showed that the polymers exhibited glass transition temperatures (Tg) ranging from 106 to 184°C.This paper is dedicated to Professor Richard J. Puddephatt in recognition of his outstanding contribution to the field of metal-containing polymers.     

OpenCOPI: middleware integration for Ubiquitous Computing

In this paper, we present OpenCOPI (Open COntext Platform Integration), a Service-Oriented Architecture-based middleware platform that supports the integration of services provided by distinct sources, ranging from services offered by simple systems to more complex services provided by context-provision middleware. OpenCOPI offers selection and composition mechanisms to, respectively, select and compose services provided by different sources, considering applications of both Quality of Service and Quality of Context requirements. It also offers an adaptation mechanism that enables to adapt the application execution due to service failures, service quality fluctuation and user mobility. OpenCOPI allows the definition of applications in a higher abstraction level by the specification of a semantic workflow that contains abstract activities. This paper illustrates the use of OpenCOPI in an application from the Gas & Oil Industry and it also shows the evaluation of the main mechanisms of OpenCOPI: the service selection, composition, adaptation and workflow execution.     

Lithium disilicate glass produced at high pressure: Characterization of structural,thermal and mechanical properties

In this work, high-density lithium disilicate (LS₂) vitreous systems were produced by melting and quenching under high pressure (7.7 GPa) following two distinct experimental routes. In the first case, LS₂ glass was remelted at 7.7 GPa and 1600°C and, then, quenched. In the second case, a stoichiometric mixture of precursor oxides (Li₂O and SiO₂) was melted at 1600°C and 7.7 GPa before quenching. A reference LS₂ glass sample was produced at atmospheric pressure using conventional melting and quenching procedure. The samples were characterized by X-ray diffraction, differential thermal analysis, and instrumented ultramicro hardness measurements. X-ray diffraction confirmed that all samples were amorphous and thermal analysis suggests that different glassy structures were produced depending on the route of synthesis. Hardness and elastic modulus of the glasses produced under high pressure were higher than those of the reference glass, reflecting the irreversible densification effect induced by the high-pressure processing.     

Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.     

Master batch approach for developing PVDF/EVA/CNT nanocomposites with co-continuous morphology and improved electrical conductivity

Conducting polymer composites constituted by co-continuous poly (vinylidene fluoride) (PVDF)/ ethylene- vinyl acetate copolymer (EVA) blends with multiwalled carbon nanotube (CNT) were prepared by melt mixing using different procedures. The effect of the master batch approach on the conductivity, morphology, mechanical, thermal and rheological properties of PVDF/EVA/CNT nanocomposites was compared with that based on one step mixing strategy. The selective extraction experiments revealed that CNT was preferentially localized in the EVA phase in all situations, even when PVDF@CNT master batch was employed. Nanocomposites prepared with EVA@CNT master batch displayed higher conductivity, whose value reached around 10⁻¹ S m⁻¹ with the addition of 0.56 vol% of CNT. The better electrical performance was attributed to the better distribution of the filler, as indicated by transmission electron microscopy and rheological behavior. The electrical and rheological behavior were also investigated as a function of the CNT content.     

A microfluidic platform with permeable walls for the analysis of vascular and extravascular mass transport

The interface between the blood pool and the extravascular matrix is fundamental in regulating the transport of molecules, nanoparticles and cells under physiological and pathological conditions. In this work, a microfluidic chip is presented comprising two parallel microchannels connected laterally via an array of high aspect ratio micropillars, constituting the permeable vascular membrane. A double-step lithographic process combined with a replica molding approach is employed to realize 80 different arrays of micropillars exhibiting three cross-sectional geometries (rectangular, elliptical and curved); two orientations (normal and parallel) with respect to the flow; and a variety of width and gap sizes, respectively, ranging from 10 to 20 μm and 2 to 5 μm. As compared to conventional rectangular structures, the curved pillars provide higher bending stiffness, lower adhesive interactions, and smaller intra-channel separation distances. Specifically, 10-μm-wide curved pillars, laying parallel to the flow, offered the highest mechanical stability. To assess vascular permeability, the extravascular channel was filled with a hyaluronic acid hydrogel, while fluorescent Dextran molecules and calibrated polystyrene beads were injected in the vascular channel. Membrane permeability was observed to reduce with the molecular weight of Dextran and diameter of the beads, ranging from about 6 × 10^?5 to 2 × 10^?5 cm/s for 40 and 250 kDa Dextran and up to zero for 1.5 μm beads. The presented data demonstrate the potential of the proposed microfluidic chip for analyzing the vascular and extravascular mass transport, over multiple spatial and temporal scales, in a variety of diseases involving differential permeation across vascular walls.     

Speeding up the spatial adiabatic passage of matter waves in optical microtraps by optimal control

We numerically investigate the performance of atomic transport in optical microtraps via the so called spatial adiabatic passage technique. Our analysis is carried out by means of optimal control methods, which enable us to determine suitable transport control pulses. We investigate the ultimate limits of the optimal control in speeding up the transport process in a triple well configuration for both a single atomic wave packet and a Bose-Einstein condensate within a regime of experimental parameters achievable with current optical technology.     

Self-adaptive utility-based web session management

In the Internet, where millions of users are a click away from your site, being able to dynamically classify the workload in real time, and predict its short term behavior, is crucial for proper self-management and business efficiency. As workloads vary significantly according to current time of day, season, promotions and linking, it becomes impractical for some ecommerce sites to keep over-dimensioned infrastructures to accommodate the whole load. When server resources are exceeded, session-based admission control systems allow maintaining a high throughput in terms of properly finished sessions and QoS for a limited number of sessions; however, by denying access to excess users, the website looses potential customers.In the present study we describe the architecture of AUGURES, a system that learns to predict Web user’s intentions for visiting the site as well its resource usage. Predictions are made from information known at the time of their first request and later from navigational clicks. For this purpose we use machine learning techniques and Markov-chain models. The system uses these predictions to automatically shape QoS for the most profitable sessions, predict short-term resource needs, and dynamically provision servers according to the expected revenue and the cost to serve it. We test the AUGURES prototype on access logs from a high-traffic, online travel agency, obtaining promising results.