The Production, Benefits, and Applications of Monoacylglycerols and Diacylglycerols of Nutritional Interest

In light of the increasing interest in the development of functional food, several researches have focused on the production of food grade emulsifiers of nutritional interest, especially enriched in the eicosapentaenoic (EPA) and docosahexaenoic acids (DHA). The aim of this paper is to make a review of the production of monoacylglycerols (MAG) and diacylglycerols (DAG) obtained from different feedstock, mainly fish oil. A section of this paper is dedicated to the raw materials used as feedstock for these emulsifiers production. The health benefits of these partial acylglycerols are outlined. The chemical and enzymatic methods for producing these esters of glycerol are discussed, focusing on glycerolysis reactions. Recent advances on the lipase-catalyzed production of these partial acylglycerols in alternative reaction media and systems are also reviewed.     

Effects of ripening on microstructure and texture of “Ameixa d’Elvas” candied plums

The plums used to produce a traditional candied product, “Ameixa d’Elvas”, were obtained from two orchards, Vila Viçosa (VV) and Cano (CA). These orchards were selected because the fruits were behaving differently: (1) The day of harvesting for candying, established by the total soluble solids and titratable acidity, was one week earlier in VV; (2) VV yielded candied plums with good texture properties whereas CA gave poor processed fruits. In order to understand the origin of these differences, fruits from both orchards were harvested on the day established as the harvesting day for VV (day 1) and for CA (day 8). Comparable texture properties were obtained in firmness, rigidity and deformation work between the VV fresh plums harvested on day 1 and the CA plums harvested on day 8 but these were lower in CA when the flesh was analysed separately, in accordance with the activities of pectin methyl esterase (PME), polygalacturonase (PG) and cellulase (Cel). The increase of the intercellular area of parenchyma cells and the decrease in cell area caused by boiling, which resulted in a pronounced loss of textural properties, were partially recovered after the immersion of the fruits in sucrose syrup. The CA plums harvested on day 8 had a more pronounced degradation with boiling and lower recovery of cell shape, size and textural characteristics than had those of VV harvested on day 1. Upon candying, similar properties were observed for the fruits harvested on the same day: good candied products were observed for VV and CA fruits harvested on day 1 and poor candied products were observed for VV and CA fruits harvested on day 8. This work shows that the characteristics of the flesh of the fresh fruits are key parameters in defining the textural properties of the candied plum. The establishment of the harvesting moment for candying should take into account the changes that occur in the flesh of the plums during ripening.     

Extracting Stray Magnetic Fields from Thin Ferromagnetic Layers in Hybrid Superconducting/Ferromagnetic Heterostructures

Journal of Superconductivity and Novel Magnetism - Hybrid Nb(20)/Cu(5)/Py(2), Nb(20)/Cu(5)/Co(40) and Nb(20)/Cu(d $$_{Cu}$$ )/Py(2)/Cu(5)/Co(40) heterostructures (values in nanometers and d...     

Data-enabled extremum seeking: A cooperative concurrent learning-based approach

This paper introduces a new class of feedback-based data-driven extremum seeking algorithms for the solution of model-free optimization problems in smooth continuous-time dynamical systems. The novelty of the algorithms lies on the incorporation of memory to store recorded data that enables the use of information-rich datasets during the optimization process, and allows to dispense with the time-varying dither excitation signal needed by standard extremum seeking algorithms that rely on a persistence of excitation (PE) condition. The model-free optimization dynamics are developed for single-agent systems, as well as for multi-agent systems with communication graphs that allow agents to share their state information while preserving the privacy of their individual data. In both cases, sufficient richness conditions on the recorded data, as well as suitable optimization dynamics modeled by ordinary differential equations are characterized in order to guarantee convergence to a neighborhood of the solution of the extremum seeking problems. The performance of the algorithms is illustrated via different numerical examples in the context of source-seeking problems in multivehicle systems.     

An unsupervised approach for fault diagnosis of power transformers

Electrical utilities apply condition monitoring on power transformers (PTs) to prevent unplanned outages and detect incipient faults. This monitoring is often done using dissolved gas analysis (DGA) coupled with engineering methods to interpret the data, however the obtained results lack accuracy and reproducibility. In order to improve accuracy, various advanced analytical methods have been proposed in the literature. Nonetheless, these methods are often hard to interpret by the decision-maker and require a substantial amount of failure records to be trained. In the context of the PTs, failure data quality is recurrently questionable, and failure records are scarce when compared to nonfailure records. This work tackles these challenges by proposing a novel unsupervised methodology for diagnosing PT condition. Differently from the supervised approaches in the literature, our method does not require the labeling of DGA records and incorporates a visual representation of the results in a 2D scatter plot to assist in interpretation. A modified clustering technique is used to classify the condition of different PTs using historical DGA data. Finally, well-known engineering methods are applied to interpret each of the obtained clusters. The approach was validated using data from two different real-world data sets provided by a generation company and a distribution system operator. The results highlight the advantages of the proposed approach and outperformed engineering methods (from IEC and IEEE standards) and companies legacy method. The approach was also validated on the public IEC TC10 database, showing the capability to achieve comparable accuracy with supervised learning methods from the literature. As a result of the methodology performance, both companies are currently using it in their daily DGA diagnosis.     

Intra- and interspecific mineral composition variability of commercial instant coffees and coffee substitutes: Contribution to mineral intake

The present paper reports the amount and estimated daily mineral intake of nine elements (Ca, Mg, K, Na, P, Fe, Mn, Cr and Ni) in commercial instant coffees and coffee substitutes (n = 49). Elements were quantified by high-resolution continuum source flame (HR-CS-FAAS) and graphite furnace (HR-CS-GFAAS) atomic absorption spectrometry, while phosphorous was evaluated by a standard vanadomolybdophosphoric acid colorimetric method.Instant coffees and coffee substitutes are rich in K, Mg and P (>100 mg/100 g dw), contain Na, Ca and Fe in moderate amounts (>1 mg/100 g), and trace levels of Cr and Ni. Among the samples analysed, plain instant coffees are richer in minerals (p < 0.001), except for Na and Cr. Blends of coffee substitutes (barley, malt, chicory and rye) with coffee (20–66%) present intermediate amounts, while lower quantities are found in substitutes without coffee, particularly in barley.From a nutritional point of view the results indicate that the mean ingestion of two instant beverages per day (total of 4 g instant powder), either with or without coffee, cannot be regarded as important sources of minerals to the human diet, although providing a supplementation of some minerals, particularly Mg and Mn in instant coffees. Additionally, and for authentication purposes, the correlations observed between some elements and the coffee percentage in the blends, with particular significance for Mg amounts, provides a potential tool for the estimation of coffee in substitute blends.     

An experimental evaluation of cross-layer routing in a wireless mesh backbone

Over the latest few years, cross-layer design in wireless networks has drawn great attention from the research community. One of the main arguments in favor of such techniques is that the hop-count metric alone is not enough to capture the specificities of wireless links (e.g., interferences, collisions, fading). In this paper, we address a simple yet fundamental question: What are the real improvements that cross-layering can bring to routing performance when compared to the simple hop-count metric? In our experiments, we consider the backbone of a real wireless mesh network composed of 12 routers deployed in an office building. We focus on the stability of routes and their persistence. In spite of the nature of cross-layer metrics that take into account information from different layers, lets them be very reactive to changes, we observe that using these metrics, pairs of nodes tend to mainly use the same set of two or three routes between them.     

A differential inclusion approach for modeling and analysis of dynamical systems under uncertainty

In this paper we deal with the application of differential inclusions to modeling nonlinear dynamical systems under uncertainty in parameters. In this case, differential inclusions seem to be better suited to modeling practical situations under uncertainty and imprecision than formulations by means of fuzzy differential equations. We develop a practical algorithm to approximate the reachable sets of a class of nonlinear differential inclusion, which eludes the computational problems of a previous set-valued version of the Heun’s method. Our algorithm is based on a complete discretization (time and state space) of the differential inclusion and it suits hardware features, handling the memory used by the method in a controlled fashion during all iterations. As a case of study, we formulate a differential inclusion to model an epidemic outbreak of dengue fever under Cuban conditions. The model takes into account interaction of human and mosquito populations as well as vertical transmission in the mosquito population. It is studied from the theoretical point of view to apply the Practical Algorithm. Also, we estimate the temporal evolution of the different human and mosquito populations given by the model in the Dengue 3 epidemic in Havana 2001, through the computation of the reachable sets using the Practical Algorithm.     

Automatic mapping of parallel applications on multicore architectures using the Servet benchmark suite

Servet is a suite of benchmarks focused on detecting a set of parameters with high influence on the overall performance of multicore systems. These parameters can be used for autotuning codes to increase their performance on multicore clusters. Although Servet has been proved to detect accurately cache hierarchies, bandwidths and bottlenecks in memory accesses, as well as the communication overhead among cores, up to now the impact of the use of this information on application performance optimization has not been assessed. This paper presents a novel algorithm that automatically uses Servet for mapping parallel applications on multicore systems and analyzes its impact on three testbeds using three different parallel programming models: message-passing, shared memory and partitioned global address space (PGAS). Our results show that a suitable mapping policy based on the data provided by this tool can significantly improve the performance of parallel applications without source code modification.     

Morphological contrast index based on the Weber's law

In this article, a morphological contrast index based on the Weber's law is proposed to quantify the contrast in a processed image. This measure involves the contours of the image along with its background. The proposal made here is applied to detect the image with higher contrast, and also identify the enhanced image most similar to the original. Moreover, the contrast index is compared with other four indexes reported in the current literature. © 2012 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 22, 137–144, 2012