Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

Diversity of pituitary cells in primary cell culture. An immunocytochemical study

A bioassay system for rapid detection of carcinogenic agents has been developed using male Fischer 344 rats to bridge the gap between long-term carcinogenicity tests and short-term screening assays. The system, called the medium-term liver bioassay, is fundamentally based on the 2-stage hypothesis of tumor production, employing initiation by diethylnitrosamine (200 mg/kg, i.p.) in the first stage and test chemical administration during the second, in combination with two-thirds partial hepatectomy. It requires only 8 wk for animal experimentation and a further few weeks for quantitative analysis of immunohistochemically demonstrated glutathione S-transferase placental form positive hepatic foci. A total of 291 chemicals/substances have already been analyzed in our laboratory. Among 63 chemicals that were proved to be carcinogenic in the liver of rat and/or mouse, 57 (90%) gave positive results irrespective of their mutagenicity. Negative compounds include peroxisome proliferators and tamoxifen. Even nonhepatocarcinogens were positive at a rate of 24%. Eighty-six percent (12/14) of mouse liver carcinogens were also positive. On the other hand, only 2 out of 45 noncarcinogens showed very weak positivity. Thus, the efficacy of the system for hepatocarcinogens has been well established. This bioassay is increasingly regarded as an appropriate alternative test for carcinogenicity risk assessment and is practically used for a rapid evaluation of hepatocarcinogenicity of chemicals.     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Disassembly sequence planning in a disassembly cell context

In this paper a two-phase approach is proposed for determining the optimal disassembly sequence when the disassembly system has a cellular configuration. Operations are first grouped into cells based on the resources they require with the goal of minimizing machine acquisition costs. The aim is to group together those operations that use similar equipment in order to achieve good utilization levels of such equipment. A maximum cell size may be imposed. Once the cells have been formed and the operations have been assigned to them, a metaheuristic algorithm (namely GRASP) is used to search for the disassembly sequence for each product that leads to the minimum number of intercellular movements. To account for uncertainty regarding the condition in which the product may arrive, each disassembly task is assumed to be required with a certain probability, regardless of the other tasks. AND/OR precedence relations among the disassembly tasks are also considered. The proposed approach is illustrated on a randomly generated disassembly problem.     

Bioactivity of antifouling paints based on organotin toxicants

This paper discusses the bioactivity of antifouling paints based on organotin toxicants, such as tributyltin fluoride (TBTF) and triphenyltin fluoride (TPTF). These compounds were used alone or mixed as the main toxicant in formulations. The use of TPTF or mixtures of TPTF and TBTF, with vinyl binders, led to paints with satisfactory bioactivity during a 24 months immersion period. With the same binders, TBTF alone provided only 12 months of antifouling protection. The correlation coefficients calculated from the fouling attachment values and the rosin content in the binder showed that the bioactivity of the tested formulations depended on the solubility of the toxicant in sea water and on the composition and solubility of the binders.     

Thermodynamics of gas-solid flow

New thermodynamic fundamentals for vertical pneumatic conueying are proposed with derivation based strictly on mass conservation and continuum concept. For a 1-D, vertical, steady gas-solid flow, these new mass and energy balances allowed the derivation of a new nondimensional energy factor containing the pressure drop. This energy factor correlated quite well with the difference between the inlet gas velocity and solids terminal velocity, when tested against high-pressure, 15-m-high, vertical pneumatic transport data from Institute of Gas Technology. The energy factor was also checked against atmospheric-pressure data of the 5-m lift line of the Pennsylvania State Uniuersity. The new energy factor covers quite well both the atmospheric- and high-pressure sets of data (923 tests) including two heights, lean- and dense-phase transports, several pipe diameters, broad and narrow particle-size distributions, and different materials. The dissipation terms in gas-solid flow were also clearly identified.     

Extrusion-rotomolding of plasticized PVC formulations

In this work, we present a novel process to produce plasticized PVC articles. Plasticized PVC dispersion resin (dry blend) was extruded and poured into a hot mold. The mold was transferred to a rotomolding machine, where the final geometry was obtained. Formulations using commercial PVC suspension resin and three different types of plasticizers were prepared under different processing conditions. The physical appearance of the articles and the tensile properties of the materials were evaluated.