A matrix-based approach to properness and inversion problems for rational surfaces

We present a matrix-based approach for deciding if the parameterization of an algebraic space surface is invertible or not, and for computing the inverse of the parametrization if it exists.     

Simulation-based sequential analysis of Markov switching stochastic volatility models

We propose a simulation-based algorithm for inference in stochastic volatility models with possible regime switching in which the regime state is governed by a first-order Markov process. Using auxiliary particle filters we developed a strategy to sequentially learn about states and parameters of the model. The methodology is tested against a synthetic time series and validated with a real financial time series: the IBOVESPA stock index (São Paulo Stock Exchange).     

Simultaneous HPLC quantification of total cholesterol,tocopherols and β-carotene in Barrosã-PDO veal

A simple, rapid and sensitive procedure for the simultaneous determination of total cholesterol, tocopherols and β-carotene in meat is described. The method involves a direct saponification of the meat, a single n-hexane extraction and the analysis of the extracted compounds by normal-phase HPLC, using fluorescence (tocopherols) and UV–Vis photodiode array (cholesterol and β-carotene) detections in tandem. Rates of recovery of spiked meat samples were 93% for cholesterol, 83–86% for (α-, β- and -γ) tocopherols and 89% for β-carotene. Repeatabilities were high (CV < 6%) for all determined compounds, except for δ-tocopherol. This tocopherol, which is not usually present in meat, showed a much lower recovery percentage (73%) and repeatability (12.8%). This methodology was applied for the quantification of total cholesterol, tocopherols and β-carotene in three muscles (longissimus thoracis, longissimus lumborum and semitendinosus) of the Portuguese traditional Barrosã-PDO veal, obtained from autochthonous calves fed extensively during summer (with the least abundant green pastures) and slaughtered in early autumn (October). Barrosã-PDO veal showed median contents of total cholesterol (0.50–0.56 mg/g) and, depending on the analysed muscle, moderate to high contents of α-tocopherol (3.3–3.9 μg/g) and β-carotene (0.07–0.09 μg/g), suggesting an high sensorial and hygienic quality.     

Spouted bed drying of cork stoppers

The spouted bed is commonly used to dry granular particles as it displays some special characteristics which render it capable of performing cyclic operations, with particles that are very difficult to fluidize under a different type of bed.Information on the characteristic drying rates of cork stoppers is still very limited in the technical and scientific literature, and until now no published data was found on the spouted bed drying of cork stoppers.The characterization of the drying performance of Port wine cork stoppers was carried out in a laboratory scale spouted bed. Characteristic drying curves were determined with 29 mm × 21 mm cork stoppers under several operating conditions. Values for the effective diffusivity were obtained in the range of 1.36 × 10⁻⁹ to 4.44 × 10⁻⁹ m²/s, with the temperature dependence represented by an Arrhenius-type relationship. The activation energy obtained was 28.72 kJ/mol.     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Evaluating reactivity to ecological momentary assessment during smoking cessation.

Ecological momentary assessment (EMA) consists of assessing phenomena in real time in the natural environment. EMA allows for more fine-grained analyses of addictive behavior and minimizes threats to internal validity, such as recall biases and errors. However, because of the intensive monitoring involved in EMA, measurement reactivity is a concern. To test whether EMA with palmtop personal computers induces reactivity, the authors compared smoking-related outcomes between smokers using EMA and those not using EMA during a quit attempt. The use of no-EMA control groups has been rare in reactivity investigations to date. The EMA protocol included event-contingent assessments (smoking episodes, urge episodes) and random assessments. Outcomes included biologically confirmed abstinence and self-report measures of withdrawal, self-efficacy, motivation, affect, and temptations. Participants were smokers motivated to quit (N = 96). They were randomized to 1 of 3 groups: EMA for the week preceding a planned quit date, EMA for the week following the quit date, and no EMA. Abstinence rates did not differ between the groups at Day 7 or at Day 28 postcessation. For the 20 subscales assessed at each of 3 assessment times, there were significant differences between participants with and without EMA experience for 3 subscales at the 1st of 3 assessment times, and significant differences for 3 different subscales at the 3rd assessment time. These differences suggest some reactivity to EMA, although the inconsistent pattern across time indicates that further research is needed to definitively conclude that EMA induces reactivity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance evaluation of a biotrickling filter degrading mixtures of hydrophobic and hydrophilic compounds

The removal of a mixture of painting solvents from waste air using a biofiltration process was evaluated in this project. The pollutants removed included hydrophobic (aromatic hydrocarbons) and hydrophilic (water soluble ketones and esters) compounds. A trickle bed reactor with a defined immobilized mixed culture on polyethylene Pall rings was utilized in this biodegradation study. The removal efficiencies (RE) of the individual groups of pollutants during loading experiments were determined. An increase of the aromatic hydrocarbons loading resulted in a drop of their RE_AROM with no effect on the RE value of ketones. The overloading of ketones caused a rapid drop in RE_AROM and a small drop in RE_KET. To achieve a restoration of the biocatalyst degradation properties after the increase in loading, an addition of phosphate to the aqueous medium was implemented which successfully restored the removal efficiency.     

Effect of Floodwater Extraction on Mountain Stream Morphology

Floodwater is often extracted for consumptive purposes from western mountain streams in the United States. The long-term extraction of floodwater may alter the morphological and ecological balance of such streams. Scale model experiments based on eight mountain gravel-bed streams in Idaho were conducted to test the effects of floodwater extraction on stream morphology. The model channel transported a poorly sorted mix of model “gravel,” as well as copious amounts of model “sand.” The channel had a discontinuous floodplain, developed its own bar morphology, and contained large model colluvium as well as a bedrock platform. A mobile-bed equilibrium was first developed using a repeated hydrograph. The experiment was then repeated using a sliding cutoff discharge. The discharges in the hydrograph that were below a given cutoff discharge were reduced to 30% of bankfull discharge. By raising the cutoff discharge, it was possible to study the effect of increasing severity of floodwater extraction on stream morphology. The experiments indicated an increase in sand content on the bed surface and a decrease in the standard deviation of fluctuations in bed elevation with increasing severity of floodwater extraction.     

A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.