A randomized,double-blind trial on the bioavailability of two CoQ10 formulations

The bioavailability of a single, 100 mg, dose of reduced Coenzyme Q10 (CoQH-CF) and Coenzyme Q10 formulation was compared in individuals of >60 years. Significantly higher (P < 0.001) plasma concentrations were demonstrated for the CoQH-CF formulation at 5, 6, 8, 12, 24, 48 and 72 h post-dose compared to the CoQ10 formulation. The area under the curve (AUC) of reduced and total Coenzyme Q10 was significantly higher (P < 0.001) in subjects administered CoQH-CF resulting in 4.3-fold higher plasma AUC_{0–72 h} (430% increase) in subjects receiving CoQH-CF compared to subjects receiving Coenzyme Q10. Oxidized Coenzyme Q10 in plasma was higher (P < 0.001) in subjects receiving CoQH-CF compared to subjects receiving Coenzyme Q10 resulting in a 3.3-fold higher plasma AUC_{0–72 h} (329% increase). Total CoQ10 reached maximum plasma concentrations 15.5 ± 19.6 h after supplementation with CoQH-CF and 26.5 ± 25.8 h after supplementation with Coenzyme Q10, respectively. Thus, reduced Coenzyme Q10 liquid soft gel formulation was found to be superior to the commercial formulation of Coenzyme Q10 for bioavailability.     

Similarity and assumed similarity in personality reports of well-acquainted persons.

The authors obtained self- and observer reports of personality from pairs of well-acquainted college students. Consistent with previous findings, results of Study 1 showed strong cross-source agreement for all 6 HEXACO personality factors (rs ≈ .55). In addition, the authors found modest levels of similarity (r ≈ .25) between dyad members' self-reports on each of 2 dimensions, Honesty-Humility and Openness to Experience. For these same 2 factors, dyad members' self-reports were correlated with their observer reports of the other dyad member (r ≈ .40), thus indicating moderately high assumed similarity. In Study 2, Honesty-Humility and Openness to Experience were the 2 personality factors most strongly associated with the 2 major dimensions of personal values, which also showed substantial assumed similarity. In Study 3, assumed similarity was considerably stronger for close friends than for nonfriend acquaintances. Results suggest that assumed similarity for Honesty-Humility and Openness to Experience reflects a tendency to overestimate one's similarity to persons with whom one has a close relationship, but only on those personality characteristics whose relevance to values gives them central importance to one's identity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Glass‐polymer melt hybrids. I: Viscoelastic properties of novel affordable organic‐inorganic polymer hybrids

A novel class of organic‐inorganic polymer hybrids was developed by melt‐blending up to 50 (v/v) % [about 83 (w/w) %] tin‐based polyphosphate glass (Pglass) and low‐density polyethylene (LDPE) in conventional plastics processing equipment. The liquid‐ and solid‐state rheology of the polymer hybrids was studied under oscillatory shear flow and deformation to understand the behavior of these materials and to accelerate efforts to melt process the Pglass with organic polymers. All the materials were found to be linearly viscoelastic in the range of temperature and frequencies examined and their viscoelastic functions increased with increasing Pglass concentration. The Pglass significantly enhanced the shear‐thinning characteristics of the Pglass‐LDPE hybrid, indicating the presence of nonlinear chemical and physical interactions between the hybrid components. Morphological examination of the materials by scanning electron microscopy revealed interesting evolution of microstructure of the Pglass phase from droplets (or round beads) to elongated and interpenetrating network structures as the glass concentration was increased in the Pglass‐LDPE hybrids. Melt viscosities of the materials were well described by a simple power‐law equation and a Maxwellian (Hookean) model with three relaxation times. Time‐temperature superpositioning (TTS) of the complex viscosity versus frequency data was excellent at 170°C < T < 220°C and the temperature dependencies of the shift factors conformed excellently well to predictions from an Arrhenius‐type relation, enabling calculation of the flow‐activation energies (25–285 kj/mol) for the materials. The beneficial function of the Pglass in the hybrid system was significantly enhanced by pre‐treating the glass with coupling agents prior to incorporating them into the Pglass‐LDPE hybrids.     

A landmark‐bounded method for large‐scale underground mine mapping

A practical localization technology for underground drift networks—such as those excavated in the practice of underground mining—has yet to become commercially available. This paper focuses on the problem of mapping GPS‐deprived underground environments with the eventual goal of using these maps for navigation. Recent industry‐directed work in the creation of a landmark‐bounded occupancy grid mapping tool that combines odometry, scanning laser data, and sporadically placed passive RFID tags is described. Unlike other work, the suggested approach holds the philosophy that precise localization of the actual landmark locations is not necessary; rather, landmarks serve as a global means for partitioning the map. Successful field experiments were conducted in two underground environments, with the results used to conduct a basic analysis of the described method. © 2012 Wiley Periodicals, Inc.     

Synthesis, characterization and degradation of biodegradable thermoplastic elastomers from poly(ester urethane)s and renewable soy protein isolate biopolymer

New biodegradable poly(ester urethane)/soy protein isolate (PEU/SPI) hybrids were prepared by in situ polymerization. The chemical incorporation of the SPI into the backbone chain of the PEU was facilitated by the reaction of the amine functional groups of SPI with methylene diphenyl diisocyanate (MDI). X-ray diffraction results showed that the chemical incorporation of SPI into PEU significantly changed the molecular structure of the PEU. The PEU/SPI hybrids exhibited higher thermal decomposition temperature and significant increase in the modulus compared with that of pure PEU. Microscopic examination of the morphology of PEU/SPI hybrids confirmed very fine and homogeneous SPI dispersion in PEU. The hydrolytic degradation of the PEU in a phosphate buffer solution was accelerated by incorporation of SPI, which was confirmed by water absorption and scanning electron microscopy of the samples after up to 10 weeks immersion in the buffer solution. This study provides a facile and innovative method of controlling the biodegradation rate of pure PEU with the additional advantage of environmentally-benign biodegradation of the hybrid PEU/SPI polymer, making the concept potentially widely applicable.     

Survey of dust production in pebble bed reactor cores

Graphite dust produced via mechanical wear from the pebbles in a pebble bed reactor is an area of concern for licensing. Both the German pebble bed reactors produced graphite dust that contained activated elements. These activation products constitute an additional source term of radiation and must be taken under consideration during the conduct of accident analysis of the design. This paper discusses the available literature on graphite dust production and measurements in pebble bed reactors. Limited data is available on the graphite dust produced from the AVR and THTR-300 pebble bed reactors. Experiments that have been performed on wear of graphite in pebble-bed-like conditions are reviewed. The calculation of contact forces, which are a key driving mechanism for dust in the reactor, are also included. In addition, prior graphite dust predictions are examined, and future areas of research are identified.     

Selection of Accelerometer Location on Bricklayers Using Decision Trees

Abstract: Preliminary investigations on accelerometer‐based activity recognition in construction have shown that it has good potential to be utilized for recognizing categories of work in a construction trade. Selecting the accelerometer locations is an important consideration in activity recognition studies, but currently it is decided primarily on the basis of comfort requirements. This article proposes a methodology for selecting the location of accelerometers using video annotations and decision trees. A video annotation tool is used to track the movement of body segments and decision tree algorithm helps to prioritize the relevant body segments for classifying activities. A two‐phase experimental study was conducted to assess the methodology. In the first phase, video annotation studies were carried out on four bricklayers, and based on decision tree analysis three locations: right lower arm, left lower arm, and waist were selected. In the second phase, an activity recognition study was conducted on another group of bricklayers with accelerometers attached at the selected locations. The results of study show that the location of accelerometer has a significant influence on accuracy and the proposed methodology is effective in selecting accelerometer locations. In the current study only bricklaying activity was considered, however, the methodology is generic and has the potential to be applied to objectively evaluate accelerator placement location for a wide range of structured activities.     

Interval timing accuracy and scalar timing in C57BL/6 mice.

In many species, interval timing behavior is accurate—appropriate estimated durations—and scalar—errors vary linearly with estimated durations. Whereas accuracy has been previously examined, scalar timing has not been clearly demonstrated in house mice (Mus musculus), raising concerns about mouse models of human disease. The authors estimated timing accuracy and precision in C57BL/6 mice, the most used background strain for genetic models of human disease, in a peak-interval procedure with multiple intervals. Both when timing 2 intervals (Experiment 1) or 3 intervals (Experiment 2), C57BL/6 mice demonstrated varying degrees of timing accuracy. An important finding was that, both at the individual and group levels, their precision varied linearly with the subjective estimated duration. Further evidence for scalar timing was obtained using an intraclass correlation statistic. This is the first report of consistent, reliable scalar timing in a sizable sample of house mice, thus validating the peak-interval procedure as a valuable technique, the intraclass correlation statistic as a powerful test of the scalar property, and the C57BL/6 strain as a suitable background for behavioral investigations of genetically engineered mice modeling disorders of interval timing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Saccharomyces cerevisiae Big1p,a putative endoplasmic reticulum membrane protein required for normal levels of cell wall beta-1,6-glucan

Deletion of Saccharomyces cerevisiae BIG1 causes an approximately 95% reduction in cell wall beta-1,6-glucan, an essential polymer involved in the cell wall attachment of many surface mannoproteins. The big1 deletion mutant grows very slowly, but growth can be enhanced if cells are given osmotic support. We have begun a cell biological and genetic analysis of its product. We demonstrate, using a Big1p-GFP fusion construct, that Big1p is an N-glycosylated integral membrane protein with a Type I topology that is located in the endoplasmic reticulum (ER). Some phenotypes of a big1Delta mutant resemble those of strains disrupted for KRE5, which encodes another ER protein affecting beta-l,6-glucan levels to a similar extent. In a big1Deltakre5Delta double mutant, both the growth and alkali-soluble beta-l,6-glucan levels were reduced as compared to either single mutant. Thus, while Big1p and Kre5p may have similar effects on beta-l,6-glucan synthesis, these effects are at least partially distinct. Residual beta-l,6-glucan levels in the big1Deltakre5Delta double mutant indicate that these gene products are unlikely to be beta-l,6-glucan synthase subunits, but rather may play some ancillary roles in beta-l,6-glucan synthase assembly or function, or in modifying proteins for attachment of beta-l,6-glucan.