Effect of different biopolymers and polymers on the mechanical and permeation properties of extruded PHBV cast films

The biopolymer poly‐3‐hydroxybutyrate‐co‐3‐hydroxyvalerate (PHBV) is a promising material for packaging applications but its high brittleness is challenging. To address this issue, PHBV was blended with nine different biopolymers and polymers in order to improve the processing and mechanical properties of the films. Those biopolymers were TPS, PBAT, a blend of PBAT + PLA, a blend of PBAT + PLA + filler, PCL and PBS, and the polymers TPU, PVAc, and EVA. The extruded cast films were analyzed in detail (melting temperature, crystallinity, mechanical properties, permeation properties, and surface topography). A decrease in crystallinity and Young's modulus and an increase in elongation at break and permeability were observed with increasing biopolymer/polymer concentration. In PHBV‐rich blends (≥70 wt % PHBV), the biopolymers/polymers PCL, PBAT, and TPU increased the elongation at break while only slightly increasing the permeability. Larger increases in the permeability were found for the films with PBS, PVAc, and EVA. The films of biopolymer/polymer‐rich blends (with PBAT, TPU, and EVA) had significantly different properties than pure PHBV. A strong effect on the properties was measured assuming that at certain biopolymer/polymer concentrations the coherent PHBV network is disrupted. The interpretation of the permeation values by the Maxwell–Garnett theory confirms the assumption of a phase separation. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46153.     

Berechnung von Stahlverbundträgern – Ein Rechenmodell zur Berücksichtigung von verformbaren,teiltragfähigen Verbundanschlüssen

Analysis of composite beams with consideration of semi‐rigid, ductile connections. Often composite connections don't have the full bending resistance of the connected composite beam and are in addition not fully rigid. But on the other side the bending resistances and the stiffnesses in the joints are too large to ignore. This article presents a simplified model, which allows to analyse the composite beam including the connection taking into account the effects of the connection as a bilinear spring.     

Monoterpene Emissions from Lodgepole and Jack Pine Bark Inoculated with Mountain Pine Beetle‐Associated Fungi

Abstract

Relative monoterpene levels were analyzed from bark samples of lodgepole pine, jack pine, and their hybrids inoculated with mountain pine beetle (MPB)–associated fungi (Leptographium longiclavatum, Grosmannia clavigera, and Ophiostoma montium). Lodgepole pine showed the largest changes in relative emissions as a result of fungal inoculation. The relative emission of β‐phellandrene increased with fungal inoculation, making it the most abundant monoterpene for inoculated samples. Relative emissions of limonene and α‐pinene decreased in inoculated lodgepole pine. Lodgepole (5.6) and jack (146) pine differed in the ratio of α‐pinene to myrcene; two monoterpenes involved in pheromone synthesis by the MPB. These differences may contribute to the attractiveness of the two species as hosts for MPB; with jack pine potentially less attractive than lodgepole pine. Fungal inoculation reduced α‐pinene:myrcene ratios in lodgepole pine, which suggests one possible mechanism by which the fungi benefit the beetle.     

Growth and exopolysaccharide yield of Lactobacillus delbrueckii ssp. bulgaricus DSM 20081 in batch and continuous bioreactor experiments at constant pH

Some Lactobacillus delbrueckii ssp. bulgaricus strains are able to synthesize exopolysaccharides (EPS) and are therefore highly important for the dairy industry as starter cultures. The aim of this study was to investigate the nutritional requirements for growth and EPS production of Lactobacillus delbrueckii ssp. bulgaricus DSM 20081. A medium was developed from a semi-defined medium (SDM) in which glucose was replaced by lactose and different combinations of supplements (nucleobases, vitamins, salts, sodium formate and orotic acid) were added. Constant pH batch fermentation with the modified medium resulted in an EPS yield of approximately 210 mg glucose equivalents per liter medium. This was a 10-fold increase over flask cultivation of this strain in SDM. Although not affecting cell growth, the mixture of salts enhanced the EPS synthesis. Whereas EPS production was approximately 12 mg/g dry biomass without salt supplementation, a significantly higher yield (approximately 20 mg/g dry biomass) was observed after adding the salt mixture. In continuous fermentation, a maximal EPS concentration was obtained at a dilution rate of 0.31/h (80 mg EPS/L), which corresponded to a specific EPS production of 49 mg/g dry biomass.     

Einfluss von Randspalt und Randabweiser auf die Fluiddynamik einer Messzelle zur HETP-Bestimmung

The scale-up of columns equipped with structured packings is a time and cost intensive process. In order to improve scale-up efficiency, a measurement cell for structured packings has been developed. This makes it possible to investigate characteristic sections of packed columns, such as bulk and wall area on a small scale. The study shows the influence of commonly installed wall wipers and the distance between wall and packing on the fluid dynamics in the measuring cell.     

A Highly Selective In Vitro JNK3 Inhibitor,FMU200, Restores Mitochondrial Membrane Potential and Reduces Oxidative Stress and Apoptosis in SH-SY5Y Cells

Current treatments for neurodegenerative diseases (ND) are symptomatic and do not affect disease progression. Slowing this progression remains a crucial unmet need for patients and their families. c-Jun N-terminal kinase 3 (JNK3) are related to several ND hallmarks including apoptosis, oxidative stress, excitotoxicity, mitochondrial dysfunction, and neuroinflammation. JNK inhibitors can play an important role in addressing neuroprotection. This research aims to evaluate the neuroprotective, anti-inflammatory, and antioxidant effects of a synthetic compound (FMU200) with known JNK3 inhibitory activity in SH-SY5Y and RAW264.7 cell lines. SH-SY5Y cells were pretreated with FMU200 and cell damage was induced by 6-hydroxydopamine (6-OHDA) or hydrogen peroxide (H₂O₂). Cell viability and neuroprotective effect were assessed with an MTT assay. Flow cytometric analysis was performed to evaluate cell apoptosis. The H₂O₂-induced reactive oxygen species (ROS) generation and mitochondrial membrane potential (ΔΨm) were evaluated by DCFDA and JC-1 assays, respectively. The anti-inflammatory effect was determined in LPS-induced RAW264.7 cells by ELISA assay. In undifferentiated SH-SY5Y cells, FMU200 decreased neurotoxicity induced by 6-OHDA in approximately 20%. In RA-differentiated cells, FMU200 diminished cell death in approximately 40% and 90% after 24 and 48 h treatment, respectively. FMU200 reduced both early and late apoptotic cells, decreased ROS levels, restored mitochondrial membrane potential, and downregulated JNK phosphorylation after H₂O₂ exposure. In LPS-stimulated RAW264.7 cells, FMU200 reduced TNF-α levels after a 3 h treatment. FMU200 protects neuroblastoma SH-SY5Y cells against 6-OHDA- and H₂O₂-induced apoptosis, which may result from suppressing the JNK pathways. Our findings show that FMU200 can be a useful candidate for the treatment of neurodegenerative disorders.