Magnetic Concentration of Quartz Sand for Glass Industry

The authors consider the production experience of a separator of the new generation with constant magnets based on Nd – Fe – B, which was designed by ÉMKO Company for producing quartz glass concentrates of grades OVS-030 and OVS-025, using dry magnetic separation. The proposed separator has several advantages compared to electromagnetic separators of the EVS series, which have the same purpose.     

A representative and comprehensive review of the electrical and thermal properties of polymer composites with carbon nanotube and other nanoparticle fillers

In this review we present the results of our literature investigation into the electrical and thermal properties of carbon nanotube polymer composites. A short selection of data relating to conductive polymer composites with various fillers is provided for comparison. The effects of filler properties such as type and size, the use of hybrid fillers, fabrication methods for polymer composites and the importance of the modeling of the electronic and thermal transport mechanisms are discussed, as are more general factors influencing the properties of these composites. This review represents a comprehensive survey and constructive study and should serve as a useful reference tool for industrial and academic researchers working in this field. © 2017 Society of Chemical Industry     

A Novel Porous Tube Reactor for Nanoparticle Synthesis with Simultaneous Gas-Phase Reaction and Dilution

A novel porous tube reactor that combines simultaneous reactions and continuous dilution in a single-stage gas-phase process was designed for nanoparticle synthesis. The design is based on the atmospheric pressure chemical vapor synthesis (APCVS) method. In comparison to the conventional hot wall chemical vapor synthesis reactor, the APCVS method offers an effective process for the synthesis of ultrafine metal particles with controlled oxidation. In this study, magnetic iron and maghemite were synthesized using iron pentacarbonyl as a precursor. Morphology, size, and magnetic properties of the synthesized nanoparticles were determined. The X-ray diffraction results show that the porous tube reactor produced nearly pure iron or maghemite nanoparticles with crystallite sizes of 24 and 29 nm, respectively. According to the scanning mobility particle sizer data, the geometric number mean diameter was 110 nm for iron and 150 nm for the maghemite agglomerates. The saturation magnetization value of iron was 150 emu/g and that of maghemite was 12 emu/g, measured with superconducting quantum interference device (SQUID) magnetometry. A computational fluid dynamics (CFD) simulation was used to model the temperature and flow fields and the decomposition of the precursor as well as the mixing of the precursor vapor and the reaction gas in the reactor. An in-house CFD model was used to predict the extent of nucleation, coagulation, sintering, and agglomeration of the iron nanoparticles. CFD simulations predicted a primary particle size of 36 nm and an agglomerate size of 134 nm for the iron nanoparticles, which agreed well with the experimental data.

Copyright 2015 American Association for Aerosol Research     

Effects of Ospemifene on Drug Metabolism Mediated by Cytochrome P450 Enzymes in Humans in Vitro and in Vivo

The objective of these investigations was to determine the possible effects of the novel selective estrogen receptor modulator, ospemifene, on cytochrome P450 (CYP)-mediated drug metabolism. Ospemifene underwent testing for possible effects on CYP enzyme activity in human liver microsomes and in isolated human hepatocytes. Based on the results obtained in vitro, three Phase 1 crossover pharmacokinetic studies were conducted in healthy postmenopausal women to assess the in vivo effects of ospemifene on CYP-mediated drug metabolism. Ospemifene and its main metabolites 4-hydroxyospemifene and 4′-hydroxyospemifene weakly inhibited a number of CYPs (CYP2B6, CYP2C9, CYP2C19, CYP2C8, and CYP2D6) in vitro. However, only CYP2C9 activity was inhibited by 4-hydroxyospemifene at clinically relevant concentrations. Induction of CYPs by ospemifene in cultured human hepatocytes was 2.4-fold or less. The in vivo studies showed that ospemifene did not have significant effects on the areas under the plasma concentration-time curves of the tested CYP substrates warfarin (CYP2C9), bupropion (CYP2B6) and omeprazole (CYP2C19), demonstrating that pretreatment with ospemifene did not alter their metabolism. Therefore, the risk that ospemifene will affect the pharmacokinetics of drugs that are substrates for CYP enzymes is low.     

Simulated cereal nitrogen uptake and soil mineral nitrogen after clover-grass leys

Simulations were made to test the effects of age and composition of red clover (Trifolium pratense) based leys on yield of two subsequent spring cereal crops, as well as nitrogen (N) uptake and soil mineral N content. The experimental plots in two trials were cropped for 2–3 years with spring cereals, or 1-, 2- or 3-year-old red clover based leys, followed by spring wheat and subsequent spring oats. CoupModel, a process oriented ecosystem model, was calibrated with measured values of above ground N uptake and soil mineral N contents from plots of cereal monoculture. Cereal N uptake was simulated for a 2 year period in cereals after leys. The calculations of N inputs in incorporated plant material of leys were also tested. Simulated N uptake in the above ground biomass generally agreed with the field data with default values of the model. Some parameters were increased in order to improve plant N uptake and keep the soil mineral N contents at the measured levels. The simulated soil mineral N contents were close to the measured values for surface layers and were more accurate than for deeper layers in the profile. However, the high simulated mineral N increase after harvest in one trial was not seen in field measurements, which remains difficult to explain. Most probably the C:N estimate for crop residues was set too low in the model, but calculated N input was on a reasonable level. These results show that further testing and adjusting of N dynamics in organic farming system using CoupModel should be continued.     

A 80-MHz bandpass ΔΣ modulator for a 100-MHz IFreceiver

A fully differential fourth-order bandpass ΔΣ modulator is presented. The circuit is targeted for a 100-MHz GSM/WCDMA-multimode IF-receiver and operates at a sampling frequency of 80 MHz. It combines frequency downconversion with analog-to-digital conversion by directly sampling an input signal from an intermediate frequency of 100 MHz to a digital intermediate frequency of 20 MHz. The modulator is based on a double-delay single-op amp switched-capacitor (SC) resonator structure which is well suited for low supply voltages. Furthermore, the center frequency of the topology is insensitive to different component nonidealities. The measured peak signal-to-noise ratio is 80 and 42 dB for 270 kHz (GSM) and 3.84-MHz (WCDMA) bandwidths, respectively. The circuit is implemented with a 0.35-μm CMOS technology and consumes 56 mW from a 3.0-V supply     

An Additive Model as a Physical Basis for Shadow Fading

Received signal power in mobile wireless communications is typically modeled as a product of three factors: distance-dependent average path loss law, variation in the local mean power (shadow fading), and small-scale fading. Of these three factors, the least investigated is the shadow fading, which is usually explained as a result of multiplication of large number of random attenuating factors in the radio channel. In this paper, the authors propose an additive model as an alternative physical basis for shadow fading within an "extended local area" where path loss is constant. Starting from a sum-of-sinusoids signal model, they show that under mild statistical assumptions on the powers of the sinusoids, the resulting signal power will have approximately Gaussian distribution in logarithmic scale. A cluster-based model for shadow fading emerges as a special instance of the general result. They present simulation and measurement results that support their theoretical findings. The new physical basis for shadow fading also provides insights into simulation and modeling of radio channels     

Water hydraulic manipulator for fail safe and fault tolerant remote handling operations at ITER

Department of Intelligent Hydraulics and Automation (IHA) of Tampere University of Technology has been involved in the European Fusion program since 1994 within the ITER reactor maintenance activities. In this paper we discuss the design and development of a six degrees of freedom water hydraulic manipulator with a force feedback for teleoperation tasks. The manipulator is planned to be delivered to Divertor Test Platform 2 (DTP2) during year 2008. The paper also discusses the possibility to improve the fail safe and redundant operation of the manipulator. During the design of the water hydraulic manipulator, special provisions have been made in order to meet the safety requirements such as servo valve block for redundant operation and safety vane brakes for fail safe operation.     

Gaschromatographie des Isopropanol-?thanol-Methanol-Wassersystems

Zusammenfassung Zum Nachweis von Isopropanol bei gleichzeitiger Anwesenheit von Methanol, Äthanol und Wasser wurde eine gaschromatographische Methode entwickelt. Die für diesen Zweck günstige Gesamtlänge der Kolonne beträgt 2,84 m, wovon der 2,24 m lange Anfangsteil mit Paraffinphase und der 0,6 m lange Schlußteil mit Polyäthylenglykolphase gefüllt ist. Als empfehlenswerte Temperatur für die Chromatographierung wird 47° C angegeben, wobei die Retentionszeiten für Methanol 12,1 min, für Äthanol 20,0 min, für Isopropanol 25,0 min und für Wasser 36 min betragen. Die Methode eignet sich ebenfalls gut zur quantitativen Bestimmung kleiner Äthanolmengen (1–3 Gew.-%) in Isopropanol.     

Risk assessment of a timber frame building by using CRISP simulation

The fire risk assessment model CRISP2 was applied to a 4‐storey apartment building. The case building was an actual 4‐storey timber‐framed building. Partly predetermined design alternatives were used in sequential simulations. CRISP2 cannot take into account the frame‐material of the building in a satisfactory way, because the wall thickness, structural fire resistance or lining materials in the fire room cannot be modelled. It was found that adding smoke alarms almost halved the risk level. The risk levels 1–2×10^?5 obtained are not far from comparable levels of fire death statistics from Finland, the United Kingdom, Sweden and Norway. Copyright © 2002 John Wiley & Sons, Ltd.