Different types of signal coupling in the visual cortex related to neural mechanisms of associative Processing and perception

The hypothesis of object representation by synchronization in the visual cortex has been supported by our recent experiments in monkeys. They demonstrated local synchrony among /spl gamma/ activities (30-90 Hz) and their perceptual modulation, according to the rules of figure-ground segregation. However, /spl gamma/-synchrony in primary visual cortex is restricted to few mm, challenging the synchronization hypothesis for larger cortical object representations. The restriction is due to randomly changing phase relations among locally synchronized patches which, however, form continuous waves of /spl gamma/-activity, traveling across object representations. The phase continuity of these waves may support coding of object continuity. Interactions across still larger distances, measured among cortical areas in human data, involve amplitude envelopes of /spl gamma/ signals. Based on models with spiking neurons we discuss potentially underlying mechanisms. Most important for /spl gamma/ synchronization are local facilitatory connections with distance-dependent delays. They also explain the occurrence of /spl gamma/ waves and the restriction of /spl gamma/-synchrony. Fast local feedback inhibition generates /spl gamma/ oscillations and supports local synchrony, while slow shunting inhibitory feedback supports figure-ground segregation. Finally, dispersion in inter-areal far projections destroys coherence of /spl gamma/ signals, but preserves their amplitude modulations. In conclusion, we propose that the hypothesis of associative processing by /spl gamma/ synchronization be extended to more general forms of signal coupling.     

Shortest path algorithms: A computational study with the C programming language

The main purpose of this study is to evaluate the computational efficiency of algorithms for calculating shortest paths when they are correctly coded by using the C programming language. The eight algorithms that we selected for this experiment are the most efficient, either measured in terms of worst-case bounds or marked as such from previous computational studies; they include the redistributive heap algorithm. We suggest computer implementations that use the full power of C. In particular, the network representation and the various data structures used to keep the scan eligible list may be managed by using only additions and no multiplications, while it is not possible with FORTRAN. These capabilities, unique to C, yield several interesting conclusions: one may expect to speed up a shortest path algorithm by a factor of 20%; in some cases, this factor may reach 30%. Interestingly, the level of programming difficulty required to achieve these benefits is not greater than that required by implementations using arrays.     

A new pneumatic bearing dynamometer for power input measurement in stirred tanks

A turntable dynamometer has been constructed for the accurate measurement of power input and mixing applications in bench stirred tank reactors. The main feature of this device is a pneumatic bearing with complementary conical parts. The conical pneumatic bearing permitted to apply eccentric loads without affecting its stability. The static friction torque in the pneumatic bearing was very small, 4 × 10^?4 Nm, and can be neglected in the experimental ranges of measured torques, i.e. from 5 × 10^?3 to 2.21 Nm. In accordance with the instrumentation used, the deviations obtained with the apparatus are less than 10% at low torque readings. At moderate torques, deviations lower than 1% are routinely obtained. Several power input measurements show that the obtained data scatter is lower than 2.5%. The power input response in the turbulent regime is in agreement with dimensional analysis: the power input depends on the cube of the impeller speed. In addition, data obtained with a turbine impeller under ungassed conditions agree with the predictions of a published correlation, which takes into account several geometrical parameters.     

Optical properties of amorphous carbon thin films prepared by plasma deposition in a graphite hollow cathode

Carbon films have been produced using a graphite hollow cathode and an r.f. plasma of hydrogen or hydrogen and argon. No hydrocarbon gas was used. The films were subjected to heat treatments up to 700 °C in air. The optical properties of the films were studied using Fourier transform IR, UV-visible, Raman, ellipsometry and photoluminescence techniques before and after the annealing. Films prepared without argon have a narrower band gap and a different photoluminescence response from films prepared with argon. The index of refraction was seen to have values between 1.7 and 2.2 depending on the preparation conditions. The optical band gap of the films was generally greater than 2 eV and the annealing process both increased the gap and reduced the density of states responsible for the large photoluminescence signal.     

环缝错边容器的有限元分析与容限探讨

采用有限元方法对 1台封头与筒体具有较大错边量的容器进行了应力分析 ,得到了错边区域的应力分布状况 ,并对其进行应力强度评定。结果表明 ,该容器错边部位的应力是满足应力分析准则的。通过对存在不同错边量的容器进行应力分析 ,探讨了容器的错边容限 ,对含有错边缺陷在役容器是否合乎使用的判断具有一定指导意义     

New approaches for error estimation and adaptivity for 2D potential boundary element methods

This work presents two new error estimation approaches for the BEM applied to 2D potential problems. The first approach involves a local error estimator based on a gradient recovery procedure in which the error function is generated from differences between smoothed and non‐smoothed rates of change of boundary variables in the local tangential direction. The second approach involves the external problem formulation and gives both local and global measures of error, depending on a choice of the external evaluation point. These approaches are post‐processing procedures. Both estimators show consistency with mesh refinement and give similar qualitative results. The error estimator using the gradient recovery approach is more general, as this formulation does not rely on an ‘optimal’ choice of an external parameter. This work presents also the use of a local error estimator in an adaptive mesh refinement procedure. This r‐refinement approach is based on the minimization of the standard deviation of the local error estimate. A non‐linear programming procedure using a feasible‐point method is employed using Lagrange multipliers and a set of active constraints. The optimization procedure produces finer meshes close to a singularity and results that are consistent with the problem physics. Copyright © 2002 John Wiley & Sons, Ltd.     

错金工艺及对其运用的探讨

为了继承和发扬错金工艺，从其定义出发，探讨了该工艺在中国古代及国外的发展与应用以及笔者对该工艺的实验研究。针对在错金工艺实践过程中出现的问题，在查阅了相关的资料后，对传统错金工艺的实现方法提出了质疑。     

A new method for the determination of wax precipitation from non-diluted crude oils by fractional precipitation

Wax precipitation is one of the most important flow assurance problems. Unfortunately, experimental data are very scarce to confirm existing models for prediction of such precipitation problem. This work reports a new experimental method. Multistage fractional wax precipitation was carried out by decreasing the temperature of crude oil. No solvent dilution was used, so the effect of solvent on temperature wax precipitation was avoided. The reproducibility of the method was tested with comparable results. The precipitation curve and the wax appearance temperature were obtained for two crude oils with different chemical nature using the reported method.     

Visualization and quantification of the mechanical deformation induced by an electrical field in poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films

An optical nondestructive strain measurement technique was performed to analyze the mechanical deformation induced by an electrical field within the insulating materials. Poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films were then subjected to constant electrical fields right up to their electrical breakdown. The experimental technique made it possible to follow the various stages of the mechanical behavior of PEN in real time. The final breakdown occurred in the observation zone and the related mechanical deformation was captured. A “margarita” structure was observed with a hole at the center. The experimental results indicated that the level of the induced‐mechanical deformations depended on the local environment. We defined two different zones representing the inside and the outside of the damaged area. The induced‐deformations were larger in the damaged zone. It was also observed that deformations increased when the sample had a lower degree of crystallinity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008