A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

Stability analysis of network-based cooperative resource allocation strategies

Resource allocation involves deciding how to divide a resource of limited availability among multiple demands in a way that optimizes current objectives. In this brief paper we focus on one type of distributed resource allocation problem where via an imperfect communication network multiple processors can share the load presented by multiple task types. We introduce asynchronous “cooperative” resource allocation strategies, and show that they lead to a bounded cumulative demand.     

Nonpathological Lyapunov functions and discontinuous Carathéodory systems

Differential equations with discontinuous right-hand side and solutions intended in Carathéodory sense are considered. For these equations, sufficient conditions which guarantee both Lyapunov stability and asymptotic stability in terms of nonsmooth Lyapunov functions are given. An invariance principle is also proven.     

The effect of aromatics on paraffin mild hydrocracking reactions (WNiPd/CeY–Al2O3)

The conversion of heavy paraffin and aromatics into a high-quality diesel fraction was performed in a microplant using a WNiPd/CeY-alumina catalyst. The effects of aromatics and naphtheno-aromatics on mild hydrocracking of hexadecane were studied at different concentrations. Two catalysts, with and without Pd and thermal treatment, were characterized by FTIR, XPS, and TPD of ammonia and ammonia plus naphthalene to complement previous study about the surface composition. The hydrocracking activity and selectivity were tested using different amounts and types of aromatics. This study demonstrated the presence of two acid strengths that contribute in different ways to paraffin and aromatics isomerization, ring opening, and cracking reactions. The product distribution obtained by mild hydrocracking of n-C₁₆ is between amorphous (SiO₂Al₂O₃) and Y-zeolite type of support. The aromatic adsorption on acid sites reduces the cracking rate and improves the survival of di- and tri-branched paraffin. A model for the path of reaction is discussed to explain the results.     

Bullwhip reduction for ARMA demand: The proportional order-up-to policy versus the full-state-feedback policy

A ‘proportional’ order-up-to policy reacting to ARMA demand is analyzed using stochastic optimal control theory. This policy is compared with a full-state-feedback order-up-to policy. Necessary conditions for an optimum of a weighted sum of the inventory and the ordering variances for both policies are formulated. Based on this a relatively simple expression for the ‘full-state’ policy is derived. The comparison between the two policies demonstrates that the ‘intuitively’ designed proportional policy does not fulfill the objective of controlling both the inventory and ordering variance for all parameter values of the demand model as well as the full-state-feedback policy. The full-state-feedback policy outperforms the proportional policy in several aspects.     

Development of intelligent multisensor surveillance systems with agents

Intelligent multisensor surveillance systems consist of several types of sensors, which are installed on fixed and mobile devices. These components provide a huge quantity of information that has to be contrasted, correlated and integrated in order to recognize and react on special situations. These systems work in highly dynamic environments, with severe security and robustness requirements. All these characteristics imply the need for distributed solutions. In these solutions, scattered components can decide and act with some degree of autonomy (for instance, if they become isolated), or cooperate and coordinate for a complete tracking of special situations. In order to cope with these requirements and to better structure the solution, we have decided to design surveillance system control as a multiagent system. This is done by applying an agent-orientated methodology, which is assessed with concrete scenarios.     

An empirical investigation of competency factors affecting e-business success in European SMEs

In the last decade there was growing interest in strategic management literature about factors that influence a company's ability to use IT. There is general consensus that knowledge and competency are necessary in developing an IT capability, but there is very little understanding of what the necessary competencies are, and how they influence IS usage in different contexts. The small and medium-sized enterprise context is particularly interesting for two reasons: it constitutes a major part of the economy and it has been relatively unsuccessful in exploiting e-business.     

不能移动封隔器管柱变形受力分析——封隔器管柱受力分析系统讨论之五

不能移动封隔器管柱是油气井封隔器完井的一种常见类型 ,在井内压力、温度、流体 (井内压力、温度、流体简称井内条件 ,下同 )发生变化时 ,不能移动封隔器管柱受力分析是保证井下安全和完井作业成功的关键 ,同时该管柱受力分析与自由移动封隔器管柱受力分析有很大的差别。文中对不能移动封隔器管柱变形受力的有关问题进行了分析、推导和讨论 ,并给出了算例。     

Parameter identification for nonlinear systems: Guaranteed confidence regions through LSCR

In this paper we consider the problem of constructing confidence regions for the parameters of nonlinear dynamical systems. The proposed method uses higher order statistics and extends the LSCR (leave-out sign-dominant correlation regions) algorithm for linear systems introduced in Campi and Weyer [2005, Guaranteed non-asymptotic confidence regions in system identification. Automatica 41(10), 1751-1764. Extended version available at 〈http://www.ing.unibs.it/∼campi〉]. The confidence regions contain the true parameter value with a guaranteed probability for any finite number of data points. Moreover, the confidence regions shrink around the true parameter value as the number of data points increases. The usefulness of the proposed approach is illustrated on some simple examples.