On learning and development, Piagetian style: I. A reply to Lefebvre-Pinard.

Examines the equilibration theory of Piaget (learning vs development, stage transitions) to make more explicit the methodological foundations of B. Inhelder et al (1974). In this connection, the "problem-solving" learning method used by these authors is analyzed by means of the new concept of "learning loops." Similarly, the successful equilibration learning method used by M. Lefebvre and A. Pinard (1974) is analyzed and shown to involve executive facilitation and chunking (coordination) of 2 crucial schemes. A process-structural model of conservation acquisition previously developed by the present author, and its empirical tests by R. Case (1975) and by G. M. Parkinson (1975), are used to illustrate and to empirically support the process-structural differences theoretically found between these 2 equilibration methods. (54 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一次同余方程组的一种矩阵解法

同余方程组是数论中一个极为有用的课题。文中考虑的是具有一个未知数而具有不同的模的一次同余方程组。一般可以用中国剩余定理或者递推算法等方法给出一次同余方程组的解法。利用矩阵的初等变换和矩阵的Sm ith标准形给出了求解一次同余方程组的一种矩阵解法。     

基于P89LPC935便携式智能电疗仪的设计

在医疗器械领域里,电疗器械有了较大的发展,但目前电疗治疗仪的一些不足之处使其很难得到推广使用。本论文介绍了目前电疗治疗仪现状与不足,据此研制了一种新型便携式智能电疗仪。该电疗仪采用电疗的机理,选用Philips公司的低功耗的P89LPC935单片机为控制核心,具有键盘扫描、数据显示和频率强度不断变化脉冲波形输出等功能。通过便携式智能电疗治疗仪的设计,探索出一条研制便携式智能医疗器械的思路,为开发其它理疗器械提供设计参考。     

Second-Order Stiffness Matrix and Loading Vector of a Beam-Column with Semirigid Connections on an Elastic Foundation

The second-order stiffness matrix and corresponding loading vector of a prismatic beam–column subjected to a constant axial load and supported on a uniformly distributed elastic foundation (Winkler type) along its span with its ends connected to elastic supports are derived in a classical manner. The stiffness coefficients are expressed in terms of the ballast coefficient of the elastic foundation, applied axial load, support conditions, bending, and shear deformations. These individual parameters may be dropped when the appropriate effect is not considered; therefore, the proposed model captures all the different models of beams and beam–columns including those based on the theories of Bernoulli–Euler, Timoshenko, Rayleigh, and bending and shear.The expressions developed for the load vector are also general for any type or combinations of transverse loads including concentrated and partially nonuniform distributed loads. In addition, the transfer equations necessary to determine the transverse deflections, rotations, shear, and bending moments along the member are also developed and presented.     

Spin effects in the screening and Auger neutralization of He ions in a spin-polarized electron gas

The screening of a He⁺ ion embedded in a free electron gas is studied for different spin-polarizations of the medium. Density functional theory and the local spin density approximation are used to calculate the induced electronic density for each spin orientation, i.e. parallel or antiparallel to the spin of the electron bound to the ion. Since both the He⁺ ion and the electron gas are spin-polarized, we analyze in detail the spin state of the screening cloud for the two different possibilities: the spin of the bound electron can be parallel to either the mayority spin or the minority spin in the medium. Finally, the spin-dependent Kohn–Sham orbitals are used to calculate the Auger neutralization rate of the He⁺ ion. The polarization of the Auger excited electron is influenced by the spin-polarization of the medium. The results are discussed in terms of the spin-dependent screening and the indistinguishability of electrons with the same spin state.     

表征PAN纤维和炭纤维微细结构的HRTEM样品制备方法

为用高分辨透射电子显微术(HRTEM)表征聚丙烯腈(PAN)纤维和炭纤维的微细结构，从纤维性能出发，探讨研碎、离子束减薄和超薄生物切片三种制备方法及其工艺步骤，结合实验结果，对比了三种制备方法的原理、优缺点，提出了制备方法的适用范围和选择原则，并推断适于表征预氧化纤维微细结构的样品制备方法。与生物样品的制备方法类似，把超薄生物切片法引入到纤维材料HRTEM样品制备领域，为系统研究炭纤维微细结构的演变提供了线索。     

微振动对空间实验室微重力环境的影响研究

针对大型刚柔组合体空间结构(空间实验室)的特点,建立系统的动力学方程,并对机柜内设备、太阳阵的转动、宇航员活动产生的激扰力进行了简化。利用计算机建立组合体的简化模型,对空间组合体在各种微振动激扰下的加速度响应进行了仿真研究,并将这些仿真结果用于空间实验室微重力环境的预测。     

压水堆一回路模拟腐蚀氧化物的溶解去污试验

本文介绍了对两种压水反应堆一回路模拟腐蚀氧化物（铁镍铬氧化物和铁镍氧化物）的溶解去污试验结果。选择的去污剂为0.3%草酸、0.1%柠檬酸和0.1%高锰酸钾。结果表明，实验温度为95℃、去污时间在6－48h范围内，0.3%草酸对铁镍铬氧化物和铁镍氧化物的溶解率分别为24.1%-65.3%和4.9%-64.4%；0.1%柠檬酸对二者的溶解率分别为2.2%-4.4%和0.37%-1.55%；0.1%高锰酸钾对二者几乎没有溶解作用。采用在草酸或柠檬酸去污前使用高锰酸钾去污剂的二步去污法，对两种氧化物的溶解度小于单独使用草酸或柠檬酸去污的一步法。     

A New Grade Carbon Black Produced by Thermal Plasma Process

This paper presents a new route about producing carbon black,by wich the natural gas cracking is carried out in the absence of oxygen thanks to an electric energy supply externally given by a plasma jet.The carbon black produced by this process has a narrow size distribution and a small average diameter of 38nm as well as a highly branched aggregate.The higher DBP value of 1.40ml/g shows it should be a high structure carbon black.The FTIR spectra shows that there are lots of aromatic c-c bonds and a large amount of nitrogen-coutaining functional groups on the carbon blacks surface,such as-NH,-CN as we3ll as -CH,-OH,-COOH groups.     

强流溅射源负离子出束实验研究

在离子源实验台架上，利用200型强流溅射离子源进行8种元素的负离子出束实验研究。这些负离子对应元素的电子亲合势大部分接近或小于零，负离子难以形成。实验中尝试使用不同的靶材料和辅助气体产生负离子，以提高负离子束的束流强度。