Systematic characterization of Cl2 reactive ion etchingfor improved ohmics in AlGaN/GaN HEMTs

Pre-metal-deposition reactive ion etching (RIE) was performed on an Al_0.3Ga_0.7N/AlN/GaN heterostructure in order to improve the metal-to-semiconductor contact resistance. An optimum AlGaN thickness for minimizing contact resistance was determined. An initial decrease in contact resistance with etching time was explained in terms of removal of an oxide surface layer and/or by an increase in tunnelling current with the decrease of the AlGaN thickness. The presence of a dissimilar surface layer was confirmed by an initial nonuniform etch depth rate. An increase in contact resistance for deeper etches was experienced. The increase was related to depletion of the two-dimensional (2-D) electron gas (2-DEG) under the ohmics. Etch depths were measured by atomic force microscopy (AFM). The contact resistance decreased from about 0.45 Ωmm for unetched ohmics to a minimum of 0.27 Ωmm for 70 Å etched ohmics. The initial thickness of the AlGaN layer was 250 Å. The decrease in contact resistance, without excessive complications on device processing, supports RIE etching as a viable solution to improve ohmic contact resistance in AlGaN/GaN HEMTs     

A series active power filter based on a sinusoidalcurrent-controlled voltage-source inverter

A series active power filter working as a sinusoidal current source, in-phase with the mains voltage, has been developed and tested. The amplitude of the fundamental current in the series filter is controlled through the error signal generated between the load voltage and a pre-established reference. The control allows an effective correction of power factor, harmonic distortion and load voltage regulation. Compared with previous methods of control developed for series active filters, this method is simpler to implement because it is only required to generate a sinusoidal current, in-phase with the mains voltage, the amplitude of which is controlled through the error in the load voltage. The proposed system has been studied analytically and tested using computer simulations and experiments. In the experiments, it has been verified that the filter keeps the line current almost sinusoidal and in-phase with the line voltage supply. It also responds very quickly under sudden changes in load conditions, reaching its steady-state in about two cycles of the fundamental     

Film cracking and debonding in a coated fiber

A fracture mechanics based methodology for the determination of interface fracture toughness from crack spacing in a thin coated fiber is presented. The coating (film) may be regarded as the matrix material in typical experiments employing this configuration. Matrix crack spacing is considered to be the result of a competitive process between matrix segmentation and interface debonding which are assumed to be governed by critical energy release rate criteria. Matrix cracks are assumed to form by the process of channeling in the circumferential direction and steady state conditions are assumed at the matrix crack front in the channeling direction. Energy release rates are determined using domain integral procedures in conjunction with the finite element method. The minimum crack spacing is obtained as a function of applied stress for different values of interface fracture toughness. A methodology to relate the saturated crack spacing to interface fracture toughness is developed. Interfaces are classified into three categories: weak, intermediate and strong. It is shown that in experiments of this type, quantitative information about the interface fracture toughness can be obtained for intermediate interfaces while qualitative information may be obtained for weak and strong interfaces.     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

Reactive Power Compensation Technologies: State-of-the-Art Review

This paper presents an overview of the state of the art in reactive power compensation technologies. The principles of operation, design characteristics and application examples of Var compensators implemented with thyristors and self-commutated converters are presented. Static Var generators are used to improve voltage regulation, stability, and power factor in ac transmission and distribution systems. Examples obtained from relevant applications describing the use of reactive power compensators implemented with new static Var technologies are also described.     

Teachers' and deaf students' perceptions of communication ease and engagement.

Collected ratings of communication ease and of engagement for 95 deaf junior and senior high school students (aged 12–21 yrs) in a large, urban, multiethnic school for the deaf. Ratings were made by the students' English teachers and by the students themselves. High teacher ratings for communication ease and engagement were associated with high academic achievement as measured by the Stanford Achievement Test. High student ratings for communication ease were also associated with academic achievement. The 2 best predictors of academic achievement were student-rated communication ease and teacher-rated engagement. Findings suggest that it is important for teachers to be sensitive to the level of communication comfort of their students because students who enjoy easier communication may be more likely to be engaged, or more actively involved, in classroom learning and to demonstrate higher academic achievement. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Unsubstantiated claims of false memory and essential responsibilities.

Comments on the assertion of K. S. Pope (see record 83-37387) that the confirmation that supposedly validates claims about the false memory syndrome, its antecedents, and its rampant magnitude needs to be made available and carefully examined. The author considers why there has been acceptance of unsubstantiated claims of false memory, and also points to essential responsibilities for psychologists whose clients have abuse memories. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Explanation-based learning as justification of knowledge

Abstract: This paper describes the use of the explanation-based learning (EBL) machine learning technique in the practical domain of knowledge acquisition for expert systems. A knowledge acquisition tool, EBKAT (Explanation-Based Knowledge Acquisition Tool), is described, which may be used in the development of knowledge bases for diagnostic expert systems. The functioning of EBKAT attempts to combine the full potential of a domain expert's skills and the power of explanation-based machine learning techniques. The EBL component is not employed in the acquisition of the knowledge base rules but is used to justify the knowledge entered and to relate it to the knowledge already in the system. It is suggested that the EBKAT tool goes some way towards overcoming the knowledge acquisition bottleneck and results in the acquisition of knowledge which is rich in contextual information.