A comparative study of 1H NMR lineshape fitting analyses and biochemical lipid analyses of the lipoprotein fractions VLDL, LDL and HDL, and total human blood plasma

The purpose of this work was two-fold. In the first instance, 1H NMR spectra of the ultracentrifuged lipoprotein fractions (VLDL, LDL and HDL) from six volunteers with different clinical conditions were measured. The methylene regions of the experimental spectra were modelled in the frequency domain using non-linear lineshape fitting analyses. In this way the resolvable Lorentzian component structures of the methylene regions of these lipoprotein fraction spectra could be determined. Second, the lipoprotein fraction analyses were used to construct simplified component structures, which interpreted the lipoprotein fraction spectra well, and were feasible to use in the total plasma spectra analyses. The considerable overlap problem of the resonances was properly handled in this way. The NMR-based relative amounts of the lipoproteins (relative integrated intensities of the lipoprotein model signals) obtained were compared to the biochemically resolved relative molar percentages of the lipoprotein fractions and also of the lipid contents between the lipoprotein complexes. It was noticed that nearly all correlations were extremely good. Thus, it is suggested that the developed methodology could be used as a fast method to predict the relative amounts of the lipoproteins and also possibly the relative lipid contents between the major lipoprotein categories directly from the proton NMR spectrum of a total blood plasma sample. Furthermore, if internal or external reference for the integrated intensities of the proton NMR resonances were used, it should also be possible to obtain the absolute amounts of these quantities.     

Improving integrity of on-line grammage measurement with traceable basic calibration

The automatic control of grammage (basis weight) in paper and board production is based upon on-line grammage measurement. Furthermore, the automatic control of other quality variables such as moisture, ash content and coat weight, may rely on the grammage measurement. The integrity of Kr-85 based on-line grammage measurement systems was studied, by performing basic calibrations with traceably calibrated plastic reference standards. The calibrations were performed according to the EN ISO/IEC 17025 standard, which is a requirement for calibration laboratories. The observed relative measurement errors were 3.3% in the first time calibrations at the 95% confidence level. With the traceable basic calibration method, however, these errors can be reduced to under 0.5%, thus improving the integrity of on-line grammage measurements. Also a standardised algorithm, based on the experience from the performed calibrations, is proposed to ease the adjustment of the different grammage measurement systems. The calibration technique can basically be applied to all β-radiation based grammage measurements.     

The effects of ventilation systems and building fabric on the stability of indoor temperature and humidity in Finnish detached houses

Interest in finding out passive ways to keep the variation in the indoor climate within the comfort zone is gaining in popularity. One possible solution is the use of the moisture-buffering property of materials. In this study, the effects of the ventilation system and moisture-buffering properties of the building fabric on the stability of the indoor temperature and humidity are analysed by means of long-term field measurements. Indoor climate measurements were carried out in 170 detached houses (248 rooms). Temperature and relative humidity were measured continuously in bedrooms and living rooms at one-hour intervals over a one-year period. In general, it may be concluded that in this study, the ventilation had a greater effect on the indoor climate than the properties of the building fabric. The dampening effect of hygroscopic materials was remarkably less in the field measurements than it was in simulations in different studies. This indicates that completely non-hygroscopic and fully hygroscopic houses do not exist in reality. The hygroscopic mass of furniture, textiles, etc. is probably a factor that plays a significant role in indoor humidity, as do real air change rates, including window airing. Simulation tools need to be modified in order to be able also to handle furniture, textiles, and books, etc.     

Determination of the sources of indoor PM2.5 in Amsterdam and Helsinki

Daily PM2.5 samples were repeatedly collected (1-8 times) in the homes of elderly nonsmoking individuals with coronary heart disease in Amsterdam, The Netherlands (33 individuals) and Helsinki, Finland (44 individuals). Sources of indoor PM2.5 were evaluated using a two-way multilinear engine model. Because the indoor elemental data lacked a traffic marker, separation of traffic related PM was attempted by combining the indoor data with fixed site outdoor data that also contained NO. Six outdoor sources, including long-range transport (LRT), urban mixture, oil combustion, traffic, sea-salt, and soil were identified, and three indoor sources were resolved: resuspension, potassium-rich and copper-rich sources. The average contribution of the indoor factors was 6% (1.1 microg m(-3)) and 22% (2.4 microg m(-3)) in Amsterdam and Helsinki, respectively. The highest longitudinal correlations between source-specific outdoor and indoor PM2.5 concentrations were found for LRT and urban mixture; the median R was above 0.6 for most sources. The longitudinal correlations were lower in Helsinki than in Amsterdam. Indoor-generated PM2.5 was not related to ambient concentrations. We conclude that using outdoor and indoor data together improved the source apportionment of indoor PM2.5. The results support the use of fixed site outdoor measurements in epidemiological time-series studies on outdoor air pollution.     

Oxidative capacity and hemolytic activity of settled dust from moisture‐damaged schools

Exposure to moisture‐damaged indoor environments is associated with adverse respiratory health effects, but responsible factors remain unidentified. In order to explore possible mechanisms behind these effects, the oxidative capacity and hemolytic activity of settled dust samples (n = 25) collected from moisture‐damaged and non‐damaged schools in Spain, the Netherlands, and Finland were evaluated and matched against the microbial content of the sample. Oxidative capacity was determined with plasmid scission assay and hemolytic activity by assessing the damage to isolated human red blood cells. The microbial content of the samples was measured with quantitative PCR assays for selected microbial groups and by analyzing the cell wall markers ergosterol, muramic acid, endotoxins, and glucans. The moisture observations in the schools were associated with some of the microbial components in the dust, and microbial determinants grouped together increased the oxidative capacity. Oxidative capacity was also affected by particle concentration and country of origin. Two out of 14 studied dust samples from moisture‐damaged schools demonstrated some hemolytic activity. The results indicate that the microbial component connected with moisture damage is associated with increased oxidative stress and that hemolysis should be studied further as one possible mechanism contributing to the adverse health effects of moisture‐damaged buildings.     

Stored Energy Evaluation for High Strength Dual-Phase Steels with Different Pre-annealing Conditions

Metallurgical and Materials Transactions A - The purpose of this study was to determine the stored energy of dual-phase (DP) steels after hot rolling, coiling, and cold reduction using electron...     

Integrated Time-to-Digital Converters Based on Interpolation

The main features of two time-to-digital convertersbased on interpolation are presented, together with some measurementresults. The first converter is based on digital delay line interpolatorsand has been implemented in a 1.2 µm CMOS process.It has a single-shot resolution of 1 ns (-value)and a nonlinearity less than ±50 ps in the measurementrange 5 to 500 ns. The power consumption of the circuit is 15mW. The second time digitizer has analog interpolators basedon time-to-voltage conversion and has been implemented in a 1.2 µm BiCMOS process. It has a single-shot resolutionof 50 ps and a nonlinearity less than 150 ps in the measurementrange 1 to 300 ns. The power consumption of this circuit is 200mW.     

The effect of seasonal variation on automated land cover mapping from multispectral airborne laser scanning data

Multispectral airborne laser scanning (MS-ALS) sensors are a new promising source of data for automated mapping methods. Finding an optimal time for data acquisition is important in all mapping applications based on remotely sensed datasets. In this study, three MS-ALS datasets acquired at different times of the growing season were compared for automated land cover mapping and road detection in a suburban area. In addition, changes in the intensity were studied. An object-based random forest classification was carried out using reference points. The overall accuracy of the land cover classification was 93.9% (May dataset), 96.4% (June) and 95.9% (August). The use of the May dataset acquired under leafless conditions resulted in more complete roads than the other datasets acquired when trees were in leaf. It was concluded that all datasets used in the study are applicable for suburban land cover mapping, however small differences in accuracies between land cover classes exist.     

Process cycle optimization in press forming of paperboard

Three‐dimensional forming of paperboard is commonly done by a press forming process, which has been widely researched. However, the process cycle of the press forming of paperboard trays has not yet been completely optimized due to limited adjustability and unsophisticated mechanical structure of commonly used forming equipment. The object of this study is to optimize the force curve of stroke to improve product quality without compromising the production rate using LUT Adjustable Packaging Line prototype for practical evaluation of formability and multibody dynamics software MSC Adams for simulation. Several process parameters were investigated with different process cycles to study their effect on the quality of the formed products. With optimized male mould speed, acceleration and speed of the blank could be reduced, which led to significantly reduced rupturing tendency without compromising the production speed. It was also found that a constant blank holding force should be used to achieve acceptable tray quality, although this results in a significantly increased surface pressure applied to the formed substrate. It was also discovered that a novel male mould attachment, which included a pressing force adjustment system that utilized a spring set with an adjustable preload, made it possible to control the force distribution between different forming tools during the dwelling phase of the process cycle in an improved way. Utilization of the method used in this paper leads to a better tray quality without compromising the production efficiency. Furthermore, this can increase the number of possible package applications for sustainable materials, such as paperboard.